Small molecular acceptors (SMAs) BTC‐2F and BTH‐2F, based on heptacyclic benzodi(cyclopentadithiophene) electron‐donating core (CBT) with chlorinated‐thienyl conjugated and thienyl conjugated side chains, respectively, are designed and synthesized. Compared with non‐chlorine acceptor BTH‐2F, BTC‐2F exhibits slightly blue‐shifted absorption spectra, similar the lowest unoccupied molecular orbital (LUMO) (–3.91 eV), deeper highest occupied molecular orbital (HOMO) energy level and higher electron mobility than that of BTH‐2F. PM6, a wide bandgap polymer, is selected as the donor material to construct bulk heterojunction polymer solar cells processed with nonhalogenated solvent toluene. The optimized PM6:BTC‐2F‐based device presents a 12.9% power conversion efficiency (PCE), while the PCE of PM6:BTH‐2F‐based device is only 11.3%. The results suggest that it is an effective strategy to optimize the photoelectric properties of SMAs by incorporating chlorine atom into the conjugated side chains. 相似文献
Solvents have an essential association with polymer solution behavior. However, few researches have been deeply done on this respect. In recent years, our research group focus on the study on effect of solvent properties on solution behavior and film condensed state structure for semi-rigid conjugated polymer up till to apply for optoelectronic device. Herein, influence of solvent properties including solubility of solvent, aromaticity, polarity and hydrogen bonds on semi-rigid polymer chain solution behavior, i.e., single chain conformation, chain shape,size and chains aggregated density were studied by means of static/dynamic laser light scattering(DLS/SLS) and exponential law etc. Effect of solvent properties on condensed state structure of the semi-rigid conjugated polymer film was studied by UV absorption spectroscopy, PL spectroscopy and electron microscopy etc. The essential reasons for the influence were discovered and the mechanism was revealed. It was found that solution behavior with different solvent properties had an essential physical relationship with chains condensed state structure of the semi-rigid conjugated polymers. More importantly, there was a quantitative structure-activity relationship between solution and film. The key to this relationship depended on the interaction between solvent molecules and the semi-rigid conjugated polymer chains. This interaction could also affect optoelectronic devices performance. This study is of great significance to effectively control the condensed state structure of the semirigid conjugated polymers in the process of dynamic evolution from solutions to films. It not only enriches the knowledge and understanding of both semi-rigid conjugated polymer solution behaviors and film condensed state physics based on polymer physics, but also is meaningful to practical application for conjugated polymer and other traditional polymer systems. 相似文献
In the past few decades, conjugated polymers have aroused extensive interest in organic electronic applications. The electrical performance of conjugated polymers has a close relationship with their backbone conformation. The conformation of the polymer backbone strongly affects the πelectron delocalization along polymer chains, the energy band gap, interchain interactions, and further affects charge transport properties. To realize a rigid coplanar backbone that usually possesses efficient intrachain charge transport properties and enhanced π–π stackings, such conformation control becomes a useful strategy to achieve high-performance (semi)conducting polymers. This minireview summarizes the most important polymer structures through conformation control at the molecular level, and then divides these rigid coplanar conjugated polymers into three categories: 1) noncovalent interactions locked conjugated polymers; 2) double-bond linked conjugated polymers; 3) ladder conjugated polymers. The effect of the conformation control on physical nature, optoelectronic properties, and their device performance is also discussed, as well as the challenges of chemical synthesis and structural characterization. 相似文献
A series of conjugated polymers based on PFS derivatives with π-conjugated 5-(9H-fluoren-2-yl)-2,2′-bithiophene(fluorene-alt-bithiophene) backbones, namely PFS-3C, PFS-4C and PFS-6C, were synthesized for their use as the anode interfacial layers(AILs) in the efficient fullerene-free polymer solar cells(PSCs). Alkyl sulfonate pendants with different lengths of alkyl side chains were introduced in the three polymers in order to investigate the effect of the alkyl chain length on the anode modification. The obtained three polymers exhibited similar absorption bands and energy levels, indicating that changing the length of the alkyl side chains did not affect the optoelectronic properties of the conjugated polymers. Based on the PBDB-T:ITIC active layer, we fabricated the fullerene-free PSCs using the three polymers as the AILs. The superior performance of the fullerene-free PSC device was achieved when PFS-4C was used as the AIL, showing a power conversion efficiency(PCE) of 10.54%. The high performance of the PFS-4C-modified device could be ascribed to the high transmittance, suitable work-function(WF) and smooth surface of PFS-4C. To the best of our knowledge, the PCE obtained in the PFS-4C-modified device is among the highest PCE values in the fullerene-free PSCs at present. These results demonstrate that the PFS derivatives are promising candidates in serving as the AIL materials for high-performance fullerene-free PSCs. 相似文献
Conjugated polymers are essential for solution‐processable organic opto‐electronic devices. In contrast to the great efforts on developing new conjugated polymer backbones, research on developing side chains is rare. Herein, we report branched oligo(ethylene glycol) (OEG) as side chains of conjugated polymers. Compared with typical alkyl side chains, branched OEG side chains endowed the resulting conjugated polymers with a smaller π‐π stacking distance, higher hole mobility, smaller optical band gap, higher dielectric constant, and larger surface energy. Moreover, the conjugated polymers with branched OEG side chains exhibited outstanding photovoltaic performance in polymer solar cells. A power conversion efficiency of 5.37 % with near‐infrared photoresponse was demonstrated and the device performance could be insensitive to the active layer thickness. 相似文献
The introduction of optoelectronic functions into viscoelastic polymers can yield highly sophisticated soft materials for biomedical devices and autonomous robotics. However, viscoelasticity and excellent optoelectronic properties are difficult to achieve because the presence of a large number of π‐conjugated moieties drastically stiffens a polymer. Here, we report a variation of additive‐free viscoelastic conjugated polymers (VE‐CPs) at room temperature by using an intact π‐conjugated backbone and bulky, yet flexible, alkyl side chains as “internal plasticizers.” Some of these polymers exhibit gel‐ and elastomer‐like rheological behaviors without cross‐linking or entanglement. Furthermore, binary blends of these VE‐CPs exhibit a never‐seen‐before dynamic miscibility with self‐restorable and mechanically induced fluorescence color changes. 相似文献
Side chains play a considerable role not only in improving the solubility of polymers for solution‐processed device fabrication, but also in affecting the molecular packing, electron affinity and thus the device performance. In particular, electron‐donating side chains show unique properties when employed to tune the electronic character of conjugated polymers in many cases. Therefore, rational electron‐donating side chain engineering can improve the photovoltaic properties of the resulting polymer donors to some extent. Here, a survey of some representative examples which use electron‐donating alkylthio and alkoxy side chains in conjugated organic polymers for polymer solar cell applications will be presented. It is envisioned that an analysis of the effect of such electron‐donating side chains in polymer donors would contribute to a better understanding of this kind of side chain behavior in solution‐processed conjugated organic polymers for polymer solar cells.
A new series of 2,1,3-benzothiadiazole (BT) acceptors with different conjugated aryl-vinylene side chains have been designed and used to build efficient low-bandgap (LBG) photovoltaic copolymers. Based on benzo[1,2-b:3,4-b']dithiophene and the resulting new BT derivatives, three two-dimensional (2D)-like donor (D)-acceptor (A) conjugated copolymers have been synthesised by Stille coupling polymerisation. These copolymers were characterised by NMR spectroscopy, gel-permeation chromatography, thermogravimetric analysis and differential scanning calorimetry. UV/Vis absorption and cyclic voltammetry measurements indicated that their optical and electrochemical properties can be facilely modified by changing the structures of the conjugated aryl-vinylene side chains. The copolymer with phenyl-vinylene side chains exhibited the best light harvesting and smallest bandgap of the three copolymers. The basic electronic structures of D-A model compounds of these copolymers were also studied by DFT calculations at the B3LYP/6-31G* level of theory. Polymer solar cells (PSCs) with a typical structure of indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/copolymer:[6,6]-phenyl-C(61) (C(71) )-butyric acid-methyl ester (PCBM)/calcium (Ca)/aluminum (Al) were fabricated and measured under the illumination of AM1.5G at 100?mW?cm(-2) . The results showed that the device based on the copolymer with phenyl-vinylene side chains had the highest efficiency of 2.17?% with PC(71) BM as acceptor. The results presented herein indicate that all the prepared copolymers are promising candidates for roll-to-roll manufacturing of efficient PSCs. Suitable electronic, optical and photovoltaic properties of BT-based copolymers can also be achieved by fine-tuning the structures of the aryl-vinylene side chains for photovoltaic application. 相似文献
Organic conjugated polymers and oligomers are key electronic materials for applications such as transistors, photovoltaics, and light emitting devices due to their potential for solution processability, mechanical flexibility, and precise structure-based tuning compared to inorganic materials. In dilute environments, the optoelectronic properties of conjugated polymers are largely governed by their constitutional structure and, to a lesser degree, their solution-state intramolecular configuration. In the solid state, intramolecular conformation and intermolecular electronic coupling impact these properties substantially, especially in relation to device performance. Therefore, an increasingly important area of research concerning conjugated materials is developing design strategies aimed at optimizing the solid-state packing for electronic applications. Programming solid-state packing arrangements through discrete non-covalent interactions is an emerging strategy within the context of conjugated polymers. This review focuses on the use of the two most prevalent discrete and directional interactions used to dictate the self-assembly of conjugated polymers and oligomers—hydrogen bonds and chalcogen bonds. We also discuss how these design motifs can imbue conjugated materials with appealing physical properties while simultaneously retaining or improving electronic capabilities. 相似文献
Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.
A new series of donor–acceptor co‐polymers based on benzodithiophene and quinoxaline with various side chains have been developed for polymer solar cells. The effect of the degree of branching and dimensionality of the side chains were systematically investigated on the thermal stability, optical absorption, energy levels, molecular packing, and photovoltaic performance of the resulting co‐polymers. The results indicated that the linear and 2D conjugated side chains improved the thermal stabilities and optical absorptions. The introduction of alkylthienyl side chains could efficiently lower the energy levels compared with the alkoxyl‐substituted analogues, and the branched alkoxyl side chains could deepen the HOMO levels relative to the linear alkoxyl chains. The branched alkoxyl groups induced better lamellar‐like ordering, but poorer face‐to‐face packing behavior. The 2D conjugated side chains had a negative influence on the crystalline properties of the co‐polymers. The performance of the devices indicated that the branched alkoxyl side chains improved the Voc, but decreased the Jsc and fill factor (FF). However, the 2D conjugated side chains would increase the Voc, Jsc, and FF simultaneously. For the first time, our work provides insight into molecular design strategies through side‐chain engineering to achieve efficient polymer solar cells by considering both the degree of branching and dimensionality. 相似文献
设计合成了一种侧链含呋喃的可交联共轭聚合物空穴传输材料聚{2,7-[9,9-二(6-(2-呋喃甲氧基)己基)芴]-共-4,4′-(4″-丁基)三苯胺}(P1)和侧链含马来酰亚胺的共轭小分子交联剂N,N′-二[4-(6-马来酰亚氨基己基)苯基]-N,N′-二苯基联苯二胺(M1).基于呋喃和马来酰亚胺间Diels-Alder反应,P1和M1共混膜可在150°C下热处理快速交联形成具有优异抗溶剂性的薄膜,同时薄膜的光电性能可以通过控制P1和M1的共混比例进行有效调节.器件研究结果表明,基于P1+M1交联的薄膜表现出了优异的空穴传输、电子阻挡性质,应用于聚合物发光二极管时可有效避免由传统空穴传输材料聚3,4-亚乙二氧基噻吩/聚苯乙烯磺酸(PEDOT:PSS)作为单一界面层引起的发光淬灭现象,使相应器件性能得到大幅提升.当M1添加量为10%时,相关器件表现出了最佳的器件性能,器件的最大电流效率为9.0 cd A~(-1),最大亮度为35681 cd m~(-2),启亮电压为3.2 V. 相似文献