全共轭聚噻吩类和聚硒吩类嵌段共聚物的凝聚态结构调控

嵌段共聚物可发生微相分离形成丰富的介观尺度上的相结构,而共轭聚合物是一类具有特殊的力学、导电性能或光电功能的半刚性链高分子.全共轭嵌段共聚物因其兼具两者的特性而备受瞩目.本文着重介绍了近年来课题组在基于全共轭聚(3-烷基噻吩)和聚(3-烷基硒吩)嵌段共聚物体系的研究进展,通过改变体系的分子结构包括主侧链结构、侧链的烷基长度及取代基团等以及对体系在溶液状态及薄膜状态进行后处理包括改变溶剂、热处理、溶剂蒸气处理等来调控体系的微相分离行为和结晶行为,实现对材料凝聚态结构的调控.在此基础上,以有机场效应晶体管和聚合物太阳能电池器件作为最终体现聚噻吩或聚硒吩类体系凝聚态结构与性能关系的平台,将获得的调控体系凝聚态结构的有效策略用于实现其半导体材料物理性能的提升.     

n-Type D-A Conjugated Polymers: Relationship Between Microstructure and Electrical/Mechanical Performance

Conjugated polymers are widely applied in optoelectronic devices due to their excellent optoelectronic properties, solution processibility, and intrinsic flexibility. High-performance films could be achieved with joint efforts from both molecular structure and film solid microstructure. Herein, research progress of the relationship between microstructure and electrical/mechanical performance of poly{[N,N'-bis(2-octyldodecyl)-representative of n-type donor-acceptor conjugated polymers, is reviewed. Its strong aggregation in solution is underlined and the methods to tune the degree of aggregation, such as solvent quality, molecular weight, and regioregularity, are compared. A liquid-crystalline behavior is evidenced in highly concentrated solutions during film drying, which favors the formation of highly anisotropic structures. Moreover, alignment techniques and thermal annealing are used to regulate molecular orientation and polymorphism in films. These structure characteristics offer great potential for researchers to handle film performances. Up to now, more attention has been paid to optimize the electrical performance of the devices. Achieving high-performance n-type conjugated polymer films with both superior mechanical and electrical properties is a newly emerging focus.     

Synthesis and Properties of Poly(4,8-dialkoxy-1,5-naphthalenevinylene)s

Novel conjugated materials, poly(4,8-dialkoxy-1,5-naphthalenevinylene)s (OC_n-PNV, n = 4, 6, 8, and 12), have been prepared by a method similar to the Gilch procedure. The structure, optical and thermal properties of these polymers with various alkoxy side chain lengths have been evaluated by IR, UV-Vis absorption, fluorescence emission and thermogravimetric analysis. The band gap of OC_n-PNV increases with increasing side chain length. Moreover, wavelengths of the photoluminescence (PL) emission peaks (λ_max) of OC_n-PNV solutions decrease with increasing alkoxy side chain length. This is probably due to the entanglement of long side chains that causes distortion of the conjugated main chains and thereby raises band gap of the polymer. PL λ_max's of these polymers in film state are red-shifted by 14–59 nm than those in solution state. The red-shift is due to the more chain aggregations after spin coating from solution into film state and consequently the lower band gap in the film state. Besides, the polymer with shorter side chains is more thermally stable than that with longer side chains.     

Probing a conjugated polymer's transfer of organization-dependent properties from solutions to films

The dynamic transfer of a conjugated polymer's organization-dependent properties from the solution state to the solid film state was probed by circularly polarized luminescence (CPL) and circular dichroism (CD) spectroscopy. Different supramolecular organizations within films and aggregate solutions of a chiral poly(p-phenylenevinylene) derivative led to opposite CPL and CD spectra. These dramatic property differences were controlled by regulating the polymer's self-assembly through solvent selection and film annealing. Therefore, different processing conditions can greatly affect the functional properties of conjugated polymer films employed in various optoelectronic applications.     

Alkyl-chain branched effect on the aggregation and photophysical behavior of polydiarylfluorenes toward stable deep-blue electroluminescence and efficient amplified spontaneous emission

The control of the condensed superstructure of light-emitting conjugated polymers(LCPs) is a crucial factor to obtain high performance and stable organic optoelectronic devices.Side-chain engineering strategy is an effective platform to tune inter chain aggregation and photophysical behaviour of LCPs.Herein,we systematically investigated the alkyl-chain branched effecton the conformational transition and photophysical behaviour of polydiarylfluorenes toward efficient blue optoelectronic devices.The branched side chain will improve materials solubility to inhibit interchain aggregation in solution according to DLS and optical analysis,which is useful to obtain high quality film.Therefore,our branched PEODPF,POYDPF pristine film present high luminance efficiency of 36.1% and 39.6%,enhanced about 20%relative to that of PODPF.Compared to the liner-type sides' chain,these branched chains also suppress chain planarization and improve film morphological stability effectively.Interestingly,the branched polymer also had excellent stable amplified spontaneous emission(ASE) behaviour with low threshold(4.72 μJ/cm~2) and a center peak of 465 nm,even thermal annealing at 220 C in the air atmosphere.Therefore,side-chain branched strategy for LCPs is an effective means to control interchain aggregation,film morphology and photophysical property of LCPs.     

Effect of Arylmethylene Substitutions on Molecular Structure,Optoelectronic Properties and Photovoltaic Performance of Dithienocyclopentafluorene-Based Small-Molecule Acceptors

Two dithienocyclopentafluorene-based small-molecule acceptors (SMAs) were developed that feature methylene-functionalized conjugated side chains, to study the effect of arylmethylene substitution and its number on structure, optoelectronic properties and device performance. Results showed that two SMAs have better absorption properties and planarity, lower bandgaps and higher LUMOs compared with the control SMA without conjugated side chains. The synthesized SMAs were tested in polymer solar cells for examples of their applicability. This work argues that the introduction of methylene-functionalized conjugated side chains has great potential in tuning molecular structure, optoelectronic properties, device physics and photovoltaic performance of SMAs.     

Alkyl-chain branched effect on the aggregation and photophysical behavior of polydiarylfluorenes toward stable deep-blue electroluminescence and efficient amplified spontaneous emission

Robust branched polydiarylfluorenes are constructed forstable deep-blue electroluminescence and efficient amplified spontaneous emission.     

Poly[(2,2′,5′,2″-tetramethoxy-p-terphenyl-5,5″-ylene)propylene]: Synthesis and physical properties of a novel amorphous regularly segmented conjugated polymer

A new regularly segmented conjugated polymer with methoxy-substituted p-terphenylene units tethered by their meta positions along the polymer main chain was synthesised using the Suzuki cross-coupling reaction. The small size of the connector and lack of long lateral chains lead to a high density of rigid electrooptically active moieties in the structure. However, this molecular architecture produces a very soluble and amorphous polymer with relatively high T_g. The optical properties of samples with different degrees of polymerisation were investigated using UV-visible absorption, steady state and time-resolved photoluminescence emission spectroscopies. Their absorption and emission properties are rather insensible to Mn after reaching a modest DP, to the aggregation state, either solution or neat film, and to annealing. The contorted polymer chain forms a very stable morphology and substantially hinders interactions between chromophores, thus diminishing the formation of aggregated species that are commonly observed in other electrooptically active polymers.     

Conformation Control of Conjugated Polymers

In the past few decades, conjugated polymers have aroused extensive interest in organic electronic applications. The electrical performance of conjugated polymers has a close relationship with their backbone conformation. The conformation of the polymer backbone strongly affects the πelectron delocalization along polymer chains, the energy band gap, interchain interactions, and further affects charge transport properties. To realize a rigid coplanar backbone that usually possesses efficient intrachain charge transport properties and enhanced π–π stackings, such conformation control becomes a useful strategy to achieve high-performance (semi)conducting polymers. This minireview summarizes the most important polymer structures through conformation control at the molecular level, and then divides these rigid coplanar conjugated polymers into three categories: 1) noncovalent interactions locked conjugated polymers; 2) double-bond linked conjugated polymers; 3) ladder conjugated polymers. The effect of the conformation control on physical nature, optoelectronic properties, and their device performance is also discussed, as well as the challenges of chemical synthesis and structural characterization.     

Synergistic Effects of External Electric Field and Solvent Vapor Annealing with Different Polarities to Enhance β-Phase and Carrier Mobility of the Poly(9,9-dioctylfluorene) Films

In this work, the synergistic effects of external electric field(EEF) and solvent vapor annealing to enhance β-phase and carrier mobility of poly(9,9-dioctylfluorene)(PFO) films were investigated. It is found that EEF can promote the PFO β-phase conformation transition and orientate the PFO chains along the EEF direction with the assistance of polar solvent vapor annealing. PFO chain orderness is closely related to the solvent polarity. In particular, the β-phase content in the annealed film of strong polar chloroform vapor increases from 18.7% to 34.9% after EEF treatment. Meanwhile a characteristic needle-like crystal is formed in the film, as a result, the hole mobility is enhanced by an order of magnitude. The mechanism can be attributed to the fast polarization of solvent dipole under the action of EEF, thus forming a driving force that greatly facilitates the orientation of PFO dipole unit. Research also reveals that EEF driving of the PFO chains does not occur with an insoluble solvent vapor since the solvent molecules cannot swell the film, thus there is insufficient free volume for PFO chains to adjust their conformation. This research enriches the understanding of the relationship between solvent vapor annealing and EEF in orientation polymers, and this method is simple and controlled, and capable of integrating into large-area thin film process, which provides new insights to manufacture low-cost and highly ordered polymer films, and is of great significance to enhance carrier mobility and efficiency of photoelectric devices based on polymer condensed matter physics.     

Theoretical and experimental study of low band gap polymers for organic solar cells

A combined theoretical and experimental investigation of the electronic structure and optical properties of poly(3-hexylthiophene) (P3HT), poly[3-(4-octylphenyl)thiophene] (POPT) and poly[3-(4-octylphenoxy)thiophene] (POPOT) is reported. In comparison with P3HT, POPT and POPOT exhibit better stabilities and the presence of an oxygen atom and/or a phenyl ring in the side chains enhances conjugation. Quantum chemical calculations have been performed on oligomers of increasing chain length to establish the changes in the electronic and optical properties when going from P3HT to the new derivative POPOT. The knowledge of the structure of these polymers is of utmost importance in understanding their optical properties in different phases (solution and condensed phase). The calculations indicate that, in opposition to P3HT and POPT polymers where the introduction of alkyl chains and the pendant phenyl disturbs the planarity of the backbone of the conjugated segment, POPOT has a better degree of organization in both states: the conjugated chain remains planar even in the presence of the phenoxy groups. Finally, the exciton binding energy is evaluated for these polymers and allows us to conclude that the POPOT is a promising polymer for photovoltaic applications when compared to P3HT and POPT.     

Conformation and diffusion behavior of ring polymers in solution: a comparison between molecular dynamics, multiparticle collision dynamics, and lattice Boltzmann simulations

We have studied the effect of chain topology on the structural properties and diffusion of polymers in a dilute solution in a good solvent. Specifically, we have used three different simulation techniques to compare the chain size and diffusion coefficient of linear and ring polymers in solution. The polymer chain is modeled using a bead-spring representation. The solvent is modeled using three different techniques: molecular dynamics (MD) simulations with a particulate solvent in which hydrodynamic interactions are accounted through the intermolecular interactions, multiparticle collision dynamics (MPCD) with a point particle solvent which has stochastic interactions with the polymer, and the lattice Boltzmann method in which the polymer chains are coupled to the lattice fluid through friction. Our results show that the three methods give quantitatively similar results for the effect of chain topology on the conformation and diffusion behavior of the polymer chain in a good solvent. The ratio of diffusivities of ring and linear polymers is observed to be close to that predicted by perturbation calculations based on the Kirkwood hydrodynamic theory.     

The effect of broken conjugation on the excited state: ether linkage in the cyano-substituted poly(p-phenylene vinylene) conjugated polymer poly(2,5,2',5'-tetrahexyloxy-8,7'-dicyano-di-p-phenylene vinylene)

We investigate the effect of broken conjugation on the excited state dynamics of excimers in cyano-substituted phenylene-vinylene polymers. We compare previous studies on the well-characterized poly(2,5,2',5'-tetrahexyloxy-8,7'-dicyano-di-p-phenylene vinylene) (CN-PPV) with poly[oxa-1,4-phenylene-1,2-(1-cyano)-ethenylene-2,5-dioctyloxy-1,4-phenylene-1,2-(2-cyano)-ethenylene-1,4-phenylene] (CN-ether-PPV), in which the conjugation is disrupted by the insertion of an oxygen atom within the polymer backbone. Despite the broken conjugation, the spectroscopic behavior of the two materials is similar, indicating that the cyano group dominates the photophysics in these materials. The emission in CN-ether-PPV is due to a single-chain exciton in solution and due to an interchain excimer in thin film, as previously reported for CN-PPV; however, the excimer absorption and emission in thin film are blueshifted by approximately 0.2 eV relative to CN-PPV, implying that the excimer in CN-ether-PPV is less stable. Furthermore, substitution of an ether group along the chain results in decay times in both solution and film that are twice as long than in CN-PPV due to the broken conjugation which restricts the exciton within a conjugation segment and reduces its access to internal quenching sites. These properties result in a decay time of 14 ns for CN-ether-PPV film, one of the longest decay times observed in a conjugated polymer film. The long lifetime indicates a large exciton diffusion length, making these species particularly vulnerable to quenching by other materials. This work has implications for the design of conjugated polymers for efficient optoelectronic devices, such as photovoltaics.     

Energy transfer through heterogeneous dyes‐substituted fluorene‐containing alternating copolymers and their dual‐emission properties in the films

We report synthesis of the modified fluorene polymers tethered to the heterogeneous types of the fluorescent dyes at the cardo carbon for obtaining the dual‐emissive solid materials. A series of the alternating fluorene copolymers modified with pyrene or 9,10‐diphenylanthracene and BODIPY at the cardo carbon based on the red‐emissive donor–acceptor structure were prepared, and their characteristics were examined. From the measurements of the optical properties, the energy transfer efficiencies were evaluated. In summary, variable energy transfer efficiencies were observed between the side chains and from the side chain to the main chain. It was indicated that the energy transfer efficiencies were strongly depended on the types of the energy donor and the detection conditions as such in the solution or film. Furthermore, it was found that the cardo fluorene units can contribute to the suppression of the energy transfer in the condensed state. Finally, the dual‐emissive polymers were obtained in the film states. This is the first example, to the best of our knowledge, not only to offer systematic information on the energy transfer between the dye molecules and the polymer main‐chains via the cardo structure but also to demonstrate the polymer‐based optical materials with the dual‐emission properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2026–2035     

Effects of packing structure on the optoelectronic and charge transport properties in poly(9,9-di-n-octylfluorene-alt-benzothiadiazole)

Spin-coated poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) films of different molecular weights (Mn= 9-255 kg/mol), both in the pristine and annealed state, were studied in an effort to elucidate changes in the polymer packing structure and the effects this structure has on the optoelectronic and charge transport properties of these films. A model based on quantum chemical calculations, wide-angle X-ray scattering, atomic force microscopy, Raman spectroscopy, photoluminescence, and electron mobility measurements was developed to describe the restructuring of the polymer film as a function of polymer chain length and annealing. In pristine high molecular weight films, the polymer chains exhibit a significant torsion angle between the F8 and BT units, and the BT units in neighboring chains are close to one another. Annealing films to sufficiently high transition temperatures allows the polymers to adopt a lower energy configuration in which the BT units in one polymer chain are adjacent to F8 units in a neighboring chain ("alternating structure"), and the torsion angle between F8 and BT units is reduced. This restructuring, dictated by the strong dipole on the BT unit, subsequently affects the efficiencies of interchain electron transfer and exciton migration. Films exhibiting the alternating structure show significantly lower electron mobilities than those of the pristine high molecular weight films, due to a decrease in the efficiency of interchain electron transport in this structure. In addition, interchain exciton migration to low energy weakly emissive states is also reduced for these alternating structure films, as observed in their photoluminescence spectra and efficiencies.     

Control of Intrachain Morphology in the Formation of Polyfluorene Aggregates on the Single-Molecule Level

Controlling the morphology of π-conjugated polymers for organic optoelectronic devices has long been a goal in the field of materials science. Since the morphology of a polymer chain is closely intertwined with its photophysical properties, it is desirable to be able to change the arrangement of the polymers at will. We investigate the π-conjugated polymer poly(9,9-dioctylfluorene) (PFO), which can exist in three distinctly different structural phases: the α-, β-, and γ-phase. Every phase has a different chain structure and a unique photoluminescence (PL) spectrum. Due to its unique properties and the pronounced spectral structure-property relations, PFO can be used as a model system to study the morphology of π-conjugated polymers. To avoid ensemble averaging, we examine the PL spectrum of single PFO chains embedded in a non-fluorescent matrix. With single-molecule spectroscopy the structural phase of every single chain can be determined, and changes can be monitored very easily. To manipulate the morphology, solvent vapor annealing (SVA) was applied, which leads to a diffusion of the polymer chains in the matrix. The β- and γ-phases appear during the self-assembly of single α-phase PFO chains into mesoscopic aggregates. The extent of β- and γ-phase formation is directed by the solvent-swelling protocol used for aggregation. Aggregation unequivocally promotes formation of the more planar β- and γ-phases. Once these lower-energy more ordered structural phases are formed, SVA cannot return the polymer chain to the less ordered phase by aggregate swelling.     

Electroluminescence and Photoluminescence of Conjugated Polymer Films Prepared by Plasma Enhanced Chemical Vapor Deposition of Naphthalene

Polymer light-emitting devices were fabricated utilizing plasma polymerized thin films as emissive layers. These conjugated polymer films were prepared by RF plasma enhanced chemical vapor deposition using naphthalene as monomer. The effect of different applied powers on the chemical structure and optical properties of the conjugated polymers was investigated. Fourier transform infrared (FTIR) and Raman spectroscopies confirmed that a conjugated polymer film with a 3-D cross-linked network was developed. By increasing the power, products tended to form as highly cross-linked polymer films. The fabricated devices showed broadband Electroluminescence (EL) emission peaks with center at 535–550 nm. Photoluminescence (PL) spectra of plasma polymers showed different excimeric emissions, resulted from crosslinked architecture. As the plasma power increased, the optical properties showed two different domains; up to 200 W, EL, PL and UV–Vis spectra red-shifted and broadened significantly. At higher powers, a reverse behavior was observed. Also, the relation between the film structure and plasma species was investigated using optical emission spectroscopy.     

Influence of the bulkiness of the substituent on the aggregation and magnetic properties of poly(3‐alkylthiophene)s

A series of poly(3‐alkylthiophene)s (P3ATs) ( P1–P5 ) has been synthesized via a Ni(dppp)‐mediated polymerization, varying the bulkiness of the alkyl side chains in order to investigate the influence of the bulkiness of the alkyl substituent on the aggregation and magnetic properties of P3ATs. UV–Vis spectroscopy, performed in solution as well as in film, shows that the stacking of the polymers becomes more complicated as the bulkiness of the side chains increases. Both the π‐interactions and the planarization of the polymer chains are diminished. While aggregation is absent in poor solvent for the polymer with the most bulky side chains, aggregation was present in film, albeit slowed down. This behavior was also confirmed by X‐ray diffraction (XRD) and differential scanning calorimetry (DSC) experiments. Electron spin resonance (ESR) measurements, performed at 300 K on powders, confirmed the trend of decreasing supramolecular order with increasing bulkiness of the side‐chain. Magnetization measurements, performed at 5 and 300 K, are in line with our hypothesis on the influence of π‐interactions and the fraction of planar polymer chains on the coercivity and saturation magnetization, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 76–86     

Synthesis and structure‐optoelectronic property relationships of a series of PPV and SFTV derived polymers

Engineering of the highest occupied molecular orbital and lowest unoccupied molecular orbitals through synthetic chemical structural modification has been the most widely used method to tuning optoelectronic properties in conjugated polymers. The electronic, thermal, optical, and physical properties can be tuned and exploited for optimization of optoelectronic devices. Through copolymerization of donor and acceptor type conjugated monomers, the frontier orbitals of four polymers were tailored. Through this synthetic engineering, the relationship between structural features, frontier orbital tailoring, and changes in optoelectronic and physical properties are discussed. Spectroscopic, thermal, and electronic analysis of the polymers indicated that polymers containing carbazole monomer moieties gave overall improved optoelectronic properties, but higher band gaps (2.61 and 2.18 eV) in comparison to their phenyl‐ based counterparts. This result is attributed to the higher electron density of the carbazole than the terephthaldicarboxaldehyde, and the possible deviation from planarity in the polymer main chain due to possible steric hindrance of the branched substituents. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2202–2213     

Effects of Alkylthio and Alkoxy Side Chains in Polymer Donor Materials for Organic Solar Cells

Side chains play a considerable role not only in improving the solubility of polymers for solution‐processed device fabrication, but also in affecting the molecular packing, electron affinity and thus the device performance. In particular, electron‐donating side chains show unique properties when employed to tune the electronic character of conjugated polymers in many cases. Therefore, rational electron‐donating side chain engineering can improve the photovoltaic properties of the resulting polymer donors to some extent. Here, a survey of some representative examples which use electron‐donating alkylthio and alkoxy side chains in conjugated organic polymers for polymer solar cell applications will be presented. It is envisioned that an analysis of the effect of such electron‐donating side chains in polymer donors would contribute to a better understanding of this kind of side chain behavior in solution‐processed conjugated organic polymers for polymer solar cells.