Hydrogen-Bond Cyclization Programming of Ultrasensitive Esters and Its Application in Gene Delivery

The ester bond as a universal linker has recently been applied in gene delivery systems owing to its efficient gene release by electrostatic repulsion after its cleavage. However, the ester bond is nonlabile and is difficult to cleave in cells. This work reports a method in which a secondary amine was introduced to the β-position of the ester bond to generate a hydrogen-bond cyclization (HBC) structure that can make the ester bond hydrolysis ultrafast. A series of molecules comprising ultrasensitive esters that can be activated by H₂O₂ were synthesized, and it was found that those able to form an HBC structure showed complete ester hydrolysis within 5 h in both water and phosphate-buffered saline solution, which was several times faster than other methods reported. Then, a series of amphiphilic poly(amidoamine) dendrimers were constructed, comprising the ultrasensitive ester groups for gene delivery; it was found that they could effectively release genes under quite a low concentration of H₂O₂ (<200 μm ) and transport them into the nucleus within 2 h in Hela cells with high safety. Their gene transfection efficiencies were higher than that of PEI_25k. The results demonstrated that the hydrogen-bond-induced ultrasensitive esters could be powerfully applied to construct gene delivery systems.     

Directing-Group-Free C7-Alkylations of N-Alkylindoles Mediated by Cationic Zirconium Complexes: Role of Brønsted Acid for Catalytic Manifold

Highly position selective alkylations of N-alkylindoles at C7-positions have been enabled by cationic zirconium complexes. The strategy provides a straightforward access to install alkyl groups at C7-positions of indoles without a complex directing group. Mechanistic studies provided support for the importance of Brønsted acids in the catalytic manifold.     

Synthesis and Herbicidal Activities of 3‐(4‐Chloro‐2‐fluoro‐5‐substituted phenyl)benzo[d][1,2,3]triazin‐4(3H)‐one Derivatives

A series of 3‐phenyl benzo[d][1,2,3]triazin‐4(3H)‐one derivatives were synthesized through the condensation of phenol E and alkyl (alkenyl, alkynyl) chlorides (bromides, iodide) or alkyl chloroacetates or N‐alkyl chloroacetamides using K₂CO₃ as the acid acceptor in N,N‐dimethylformamide. Phenol E was prepared from starting material, 5‐amino‐2‐chloro‐4‐fluorophenyl ethyl carbonate, in four steps involving in amidation, reduction, diazotization, and deprotecting‐group reaction. The herbicidal activities of the title compounds were tested against two dicotyledonous plants and two monocotyledonous plants, in which some of them exhibited high herbicidal activities against two dicotyledonous plants in preemergence and postemergence treatments. Moreover, when the dosage was decreased to 180 and 90 g/ha, compounds F1 , F8 , and F9 showed highly selective inhibitory activities against amaranth pigweed, alfalfa, asteraceae, field sowthistle, morning glory, purslane, and velvetleaf in postemergence treatment but had no herbicidal efficacy on rape except F1 , suggesting that it be possible to find a kind of herbicides to inhibit dicotyledonous weeds in the field of dicotyledonous crops with the same genus as aforementioned weeds.     

湍流大气传输中跟踪抖动对远场影响的仿真研究

分析了跟踪抖动对湍流大气传输远场光斑的影响。基于麦克斯韦电磁场理论,采用大气相干长度对大气湍流进行描述,推导了发射光束因跟踪抖动导致光轴偏离的远场表达式。在此基础上,利用相位屏法模拟抖动引起的倾斜相位和大气折射率起伏引起的相位调制,并采用低频补偿的功率谱反演法对传输过程进行了数值仿真。分析了不同跟踪抖动、湍流强度条件下远场光斑质心脱靶量的变化,以及不同尺寸模拟目标的回波概率。分析结果表明,在传输距离为10 km时,强湍流造成的远场光斑脱靶量可达几十μrad;当跟踪抖动较大时,湍流强弱对脱靶量影响差别很小。最后,对一定尺寸的模拟目标,从探测回波概率的角度给出了发射系统跟踪抖动量的控制范围。     

A Polyoxometalate-Based Binder-Free Capacitive Deionization Electrode for Highly Efficient Sea Water Desalination

Capacitive deionization is a promising technique in sea water desalination. Compared with common electrodes, mixed capacitive-deionization electrodes exhibit better performance in sea water desalination because they integrate pseudocapacitance and electric double-layer capacitance in one system. Herein, a 3D binder-free mixed capacitive-deionization electrode was fabricated by direct electrodeposition of SiW₁₂O₄₀⁴⁻ and polyaniline on a 3D exfoliated graphite carrier. In this electrode, SiW₁₂O₄₀⁴⁻/polyaniline composite particles with a size of about 100–120 nm are dispersed homogenously on the 3D exfoliated graphite carrier. Its specific capacitance reaches 352 F g⁻¹ at 1 A g⁻¹. With increasing current from 1 to 20 A g⁻¹, the specific capacitance only decays by 32 %. When employed in sea water desalination, the performance of this mixed capacitive-deionization electrode is also excellent. At 1.2 V, the salt adsorption capacity of this mixed electrode reaches 23.1 mg g⁻¹ with a salt adsorption rate of 1.38 mg g⁻¹ min⁻¹ in 500 mg L⁻¹ NaCl. The performance of this electrode is well retained after 30 cycles. The excellent sea water desalination performance originates from the synergistic effect between SiW₁₂O₄₀⁴⁻ and polyaniline. This work has developed polyoxometalate as a new material for capacitive-deionization electrodes.     

Building Polyoxometalate “Nano-Walls” on 3D Porous Carbon Paper: A Solar Steam Generation System for Water Purification

As promising fresh-water purification devices, solar steam generation systems have attracted significant attention recently. However, in practice, the approach often suffers from a poor solar energy conversion efficiency and a low water production rate due to poor material selection and inefficient microscopic structure design. Here, we fabricate an efficient solar steam generation system by “building” polyoxometalate “nano-walls” on rice paper-derived three-dimensional porous carbon paper. In this solar steam generation system, the height of the vertically aligned CoP₄Mo₆ “nano-walls” range from 100 to 150 nm with thicknesses about 15 to 25 nm. Under 1 sun irradiation (1 sun = 1 kW m⁻²), the surface temperature increases from 29 to 50 °C in a short time with a solar thermal conversion efficiency achieving 92.8 %. The stability and durability of this solar steam generation system, which withstands fifteen cycle continuous tests, also offer good prospects. Its attractive solar energy conversion performance originates from the intense sunlight absorption and high conversion ability of the CoP₄Mo₆ “nano-walls”, as well as extremely promising heat localization and water transportation properties of the three-dimensional porous carbon paper. This solar steam generation system, which has produced some inspiring results, is employed for seawater desalination and for purification of water polluted with organic dyes.     

Continuous Electrochemical Synthesis of Iso-Coumarin Derivatives from o-(1-Alkynyl) Benzoates under Metal- and Oxidant-Free

A non-oxidant and metal-free strategy for synthesizing iso-coumarin by using a continuous electrochemical microreactor to initiate an oxidative cyclization reaction of o-(1-alkynyl) benzoate and radicals. This efficient and clean continuous electrosynthesis method not only avoids the complicated gas protection operation and production of by-products in the batch processes, but also help to overcome the difficulty that batch metal catalysis and electrocatalysis are difficult to scale up, and has the potential for pilot-scale experiment.     

以尿素为氮源合成AlN粉体过程中非晶碳的石墨化

针对有机合成过程中碳及碳化物的残余,传统方法中普遍使用除碳的工艺,而很少有文章针对非晶碳的结构和形貌进行表征。为此,本文采用高尿素含量的前驱盐体系,通过在氮气保护气氛中煅烧获得AlN粉体。采用X射线衍射分析、红外和拉曼光谱分析、扫描电子显微镜和透射电子显微镜对850~1 500 ℃温度范围内煅烧获得产物的结构和形貌进行表征,对AlN合成过程中含碳产物结构形貌的变化,以及AlN和含碳产物之间相互的依存生长关系进行分析。结果表明,AlN生长的过程中伴随着无定形碳的石墨化转变,AlN颗粒的形貌也受含碳残余产物形貌的影响而出现有规律的变化。     

Enhancement of bioelectrochemical dioxygen reduction with oxygen-enriching materials

Bioelectrochemical dioxygen reduction reaction (ORR) catalyzed by multi-copper oxidases (MCOs) is a process of paramount importance occurring at the cathode of enzymatic biofuel cells (EBFCs), which is an energy harvester that holds promise of self-sustained implantable and wearable medical devices. The MCO biocathode is, however, frequently the limiting factor of a working EBFC. Besides the operational stability issue, enzymatic biocathodes are largely constrained by the relatively low solubility of dioxygen in aqueous solution. As an emerging topic, we here review the introduction of dioxygen-enriching materials to the cathodic bioelectrode for overcoming the dioxygen supply limitation, leading to improved ORR performance.     

Decorating Single-Atomic Mn Sites with FeMn Clusters to Boost Oxygen Reduction Reaction

The regulation of electron distribution of single-atomic metal sites by atomic clusters is an effective strategy to boost their intrinsic activity of oxygen reduction reaction (ORR). Herein we report the construction of single-atomic Mn sites decorated with atomic clusters by an innovative combination of post-adsorption and secondary pyrolysis. The X-ray absorption spectroscopy confirms the formation of Mn sites via Mn-N₄ coordination bonding to FeMn atomic clusters (FeMn_ac/Mn-N₄C), which has been demonstrated theoretically to be conducive to the adsorption of molecular O₂ and the break of O−O bond during the ORR process. Benefiting from the structural features above, the FeMn_ac/Mn-N₄C catalyst exhibits excellent ORR activity with half-wave potential of 0.79 V in 0.5 M H₂SO₄ and 0.90 V in 0.1 M KOH as well as preeminent Zn-air battery performance. Such synthetic strategy may open up a route to construct highly active catalysts with tunable atomic structures for diverse applications.