硒吩聚合物/寡聚物有机光电材料研究进展

主要从光电性能角度总结了近几年硒吩聚合物/寡聚物在有机太阳能电池(OSCs)、场效应晶体管(FETs)、发光二级管(LED)等方面的研究进展。目前,基于聚硒吩并[3,4-b]硒吩-苯并二硒吩(PSeB2)(polyselenopheno[3,4-b]selenophene-co-benzodiselenophene)本体异质结太阳能电池器件的能量转化效率最高,达6.87%;场效应晶体管方面,基于PSeDPP(P28)器件的空穴迁移率最高达1.62cm2.V-1.s-1。基于PFO-DDSTQ(一种硒吩芴基聚合物)的发光二级管,表现出目前基于硒吩化合物的最长波长发光器件,EL光谱峰值约860nm。通过对研究者的研究成果的总结发现,在有机光电器件的应用领域中硒吩聚合物/寡聚物是一种极具应用前景的材料。     

Na+，K+//Br-，SO42--H2O四元体系323 K相平衡研究

采用等温溶解平衡法研究了四元体系Na⁺,K⁺//Br^-,SO₄^2--H₂O在323 K的相平衡关系,测定了该体系323 K的溶解度及平衡液相的密度,绘制了该体系的相图。研究发现：平衡体系存在复盐钾芒硝Na₂SO₄·3K₂SO₄的结晶区。其相图由3个共饱和点,7条单变量曲线和5个结晶区组成。相区分别对应NaBr·2H₂O、Na₂SO₄、K₂SO₄、KBr和Na₂SO₄·3K₂SO₄结晶区。其中复盐钾芒硝Na₂SO₄·3K₂SO₄,Na₂SO₄和K₂SO₄有较大结晶区,而NaBr·2H₂O和KBr有较小结晶区。对比了等温条件下四元体系Na⁺,K⁺//Cl^-,SO₄^2--H₂O相平衡结果。实验结果表明溴化物对硫酸盐有较强盐析作用。     

An electrochemically prepared sky-blue light emitting ether functionalized polyfluorene as chemosensor for metal ions

Synthesis and electrochemical polymerization of 9,9-bis(2-(2-(2-methoxy ethoxy)ethoxy)ethyl)-fluorene(EO-F)into poly[9,9-bis(2-(2-(2-methoxy ethoxy)ethoxy)ethyl)-fluorene](EO-PF) films are reported. The boron trifluoride diethyl etherate electrolyte enables facile preparation of EO-PF films at lower potential compared to LiClO4/MeCN and the electrochemical polymerizations are discussed. The EO-PF shows good electrochemical behavior and can be dissolved in solvents such as DMSO and THF. The solubility of EO-PF in THF is 2 mg mL 1and the number average molecular weight is35300 with a polydispersity index of 1.65. The side chains on C9position of the monomer maintain unchanged after electrooxidation into corresponding polymer. The EO-PF dissolved in THF under 365 nm ultraviolet light is sky blue light emitting with the Commission Internationale de L Eclairage-CIE coordinates of(0.19, 0.15). The electropolymerized EO-PF is used for the first time in chemosensing metal ions, demonstrating fluorescence quenching for Mn2+and Fe3+while fluorescence enhancement for Cr6+ions.     

一类窄带隙芴基共聚物的合成及其在发光二极管和太阳电池中的应用

基于9,9-二辛基芴(DOF)与窄带隙单体2,3-二甲基-5,8-二噻吩-喹喔啉(DDQ),通过Suzuki偶合反应,合成了一系列无规和交替窄带隙的芴基共聚物(PFO-DDQ),并对它们的紫外-可见吸收光谱、光致发光光谱、电致发光性能和光伏性能进行了初步研究.共聚物在380 nm和490 nm处有两处明显的吸收峰,其中490nm处的吸收强度随着共聚物中窄带隙单元(DDQ)含量的增加而成比例加强.随着共聚物中窄带隙单元(DDQ)含量的增加,电致发光峰值从580 nm红移到了635 nm.基于该类材料的橙红或饱和红色发光二极管最大外量子效率为1.33%,流明效率为1.54 Cd/A.试验中观察到了窄带隙单元的能量陷阱机制.以窄带隙单元含量为30%的聚合物(PFO-DDQ30)为电子给体、PCBM为电子受体所制备的共混体相异质结太阳电池最大能量转换效率为1.18%,开路电压0.9 V,短路电流密度2.66 mA/cm2.光敏曲线覆盖300 nm~700 nm.     

二羟基丙基芴基聚合物合成及光电性能研究北大核心CSCD

通过Pd催化的Suzuki聚合反应制备了侧链上含有缩酮基团的芴基聚合物PFketal,对聚合物的酸性处理得到具有羟基基团的聚合物PFOH。通过FT-IR、1 H-NMR、凝胶渗透色谱(GPC)、紫外-可见吸收光谱(UV-Vis)、光致发光光谱(PL)和循环伏安(CV)测试对聚合物进行了表征。两种聚合物具有相似的光学性质,二者在薄膜状态下UV-Vis吸收峰位于387nm处,PL发射峰值为424nm。CV测试表明PFOH相对PFketal具有较低的起始氧化电位。羟基的引入可改善聚合物在极性溶剂中的溶解度,PFOH在PFketal的不良溶剂,如二甲基甲酰胺(DMF)和二甲基亚砜(DMSO)中均具有良好的溶解度。     

基于易升华添加剂辅助合成纯相富铯(CH(NH2)2)xCs1−xPbI3 钙钛矿

钙钛矿材料化学组分是决定钙钛矿太阳能电池效率和稳定性的关键,纯无机钙钛矿CsPbI₃具有相对较好的热稳定性和光稳定性,但由于Cs⁺具有较小的离子半径而导致无机钙钛矿相不稳定。最近研究发现富铯FA_xCs_1?xPbI₃钙钛矿具有相对稳定的相结构,且可以很大程度上保持无机钙钛矿材料的热稳定性和光照稳定性,是一种非常具有前景的钙钛矿材料体系。目前这种富铯的FA_xCs_1?xPbI₃材料合成是通过引入过量有机组分FAI实现的,其中FAI一方面充当钙钛矿的掺杂剂,另一方面过量的FAI充当添加剂。由于其具有较高的升华温度,后续需要较高的温度使过量的FAI升华,实际上这在实验上很难实现对FAI升华量的精确控制。本文重点研究具有低升华温度的胺类,如碘甲胺(MAI)、碘化二甲胺(DMAI)、碘化乙胺(EAI)、碘化胺(NH₄I)和醋酸甲脒(FAAC),作为添加剂制备富铯FA_xCs_1?xPbI₃钙钛矿材料体系的可行性,这一方面可以有效降低钙钛矿薄膜的热处理温度;另一方面可拓宽的制备纯相钙钛矿成分的窗口期,这对大面积制备纯相富铯FA_xCs_1?xPbI₃钙钛矿薄膜尤为重要。结果表明MAI和DMAI可以作为合成FA_xCs_1?xPbI₃钙钛矿材料的有效添加剂,其与PbI2间较强的作用力可以促进Cs₄PbI₆的形成并有效抑制δ-CsPbI₃副产物的生成。合适的升华温度可以使薄膜在保持钙钛矿相结构的同时在较低温度升华去除过量的添加剂,最终实现在相对温和的条件下制备纯相富铯FA_xCs_1?xPbI₃钙钛矿材料。     

High-performance fullerene-free polymer solar cells with solution-processed conjugated polymers as anode interfacial layer

A series of conjugated polymers based on PFS derivatives with π-conjugated 5-(9H-fluoren-2-yl)-2,2′-bithiophene(fluorene-alt-bithiophene) backbones, namely PFS-3C, PFS-4C and PFS-6C, were synthesized for their use as the anode interfacial layers(AILs) in the efficient fullerene-free polymer solar cells(PSCs). Alkyl sulfonate pendants with different lengths of alkyl side chains were introduced in the three polymers in order to investigate the effect of the alkyl chain length on the anode modification. The obtained three polymers exhibited similar absorption bands and energy levels, indicating that changing the length of the alkyl side chains did not affect the optoelectronic properties of the conjugated polymers. Based on the PBDB-T:ITIC active layer, we fabricated the fullerene-free PSCs using the three polymers as the AILs. The superior performance of the fullerene-free PSC device was achieved when PFS-4C was used as the AIL, showing a power conversion efficiency(PCE) of 10.54%. The high performance of the PFS-4C-modified device could be ascribed to the high transmittance, suitable work-function(WF) and smooth surface of PFS-4C. To the best of our knowledge, the PCE obtained in the PFS-4C-modified device is among the highest PCE values in the fullerene-free PSCs at present. These results demonstrate that the PFS derivatives are promising candidates in serving as the AIL materials for high-performance fullerene-free PSCs.     

新型基于3,6-咔唑与噻吩衍生物的红光聚合物的合成与性能研究

用Suzuki偶合反应制备了一系列N-(2-乙基己基)-3,6-咔唑(Cz)与4,7-二(4-己基噻吩)-2,1,3-苯并噻二唑(DHTBT)的共聚物, 研究该类聚合物的电化学、光学和电致发光性能. 在薄膜状态下, 即使DHTBT含量为1%的聚合物也发生了从Cz链段到DHTBT单元的有效的能量转移. 光致发光光谱随着DHTBT含量的增加, 从645 nm红移至690 nm. PCzDHTBT1获得了71%的薄膜光致发光效率. 以该类聚合物为发光层的器件的EL光谱也随着DHTBT含量的增加从635 nm红移至680 nm. 由PCzDHTBT15制作的结构为ITO/PEDOT:PSS/polymer/Ba/Al的器件得到了0.61%的外量子效率.     

PURIFIED POLAR POLYFLUORENE FOR LIGHT-EMITTING DIODES AND LIGHT-EMITTING ELECTROCHEMICAL CELLS

Conjugated ployfluorene with 2-(2-(2-methoxyethoxy)ethoxy)ethyl groups(EO-PF)is prepared by the palladiumcatalyzed Suzuki coupling reaction.The polymer is purified carefully by a simple chemical procedure.The inductively coupled plasma(ICP)test shows palladium-catalyst in the polymer can be removed by this procedure.The thermal properties,electrochemical properties,UV-Vis absorption properties,photoluminescence properties and electroluminescent properties of the polymer without(EO-PF1)or with purification(EO-PF2)are studied.EO-PF2 shows better PL CIE coordinates in THF solutions as blue light-emitting materials and better photoluminescence stability in thin solid films. Polymer light emitting diodes and electrochemical cells based on EO-PF2 exhibit somewhat improved optoelectronic performance than control devices of EO-PF1.     

窄带隙二噻吩并吡咯共聚物合成与光伏性能研究

二噻吩[3,2-b:2′,3′-d]并吡咯(Dithieno[3,2-b:2′,3′-d]pyrrole,DTP)分别与3种受体单元聚合得到聚合物P1~P3,受体单元分别为:吡咯并吡咯二酮(DPP)、二噻吩苯并噁二唑(DTBO)和喹喔啉衍生物(TQ).研究表明,3种聚合物都有较窄的带隙(P1:1.23 e V,P2:1.51 e V,P3:1.50 e V),有利于活性层材料对太阳光的吸收,其中P1获得了最宽的吸收(近1000 nm).将P1~P3与PC71BM共混制备光伏器件,当给受体比例为1∶3时,基于P1的光伏器件短路电流密度(short-circuit current density,JSC)为15.82 m A/cm~2,开路电压(open-circuit voltage,VOC)为0.38 V,能量转化效率(power conversion efficiency,PCE)达到3.33%,为3种聚合物中最高的效率.对于聚合物P2和P3,在给受体比例为1∶2时,光伏性能最好,此时P2与P3的PCE值分别为1.20%和1.37%,导致较低光电转换效率的因素是短路电流密度JSC(P2:9.70 m A/cm~2,P3:9.21 m A/cm~2)和开路电压VOC(约0.3 V)过低.