Electrical properties of Sr<Subscript>3</Subscript>Bi<Subscript>4</Subscript>Ti<Subscript>6</Subscript>O<Subscript>21</Subscript> thin films

Highly c-axis-oriented Sr₃Bi₄Ti₆O₂₁ (SBTi) thin films were fabricated on Pt-coated Si substrates by pulsed laser deposition (PLD). The structures were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). No peaks of SrTiO₃ (STO) could be detected in the XRD pattern, indicating the existence of the SBTi single phase. Good ferroelectric hysteresis loops of the films with Pt electrodes were obtained. With an applied field of 400 kV/cm, the measured remanent polarization (P_r) and coercive field (E_c) values were 4.1 C/cm² and 75 kV/cm respectively. The films showed little fatigue after 2.22×10⁹ switching cycles: the nonvolatile polarizations decreased by less than 5% of the initial values. The dielectric constant and the loss tangent of the films were measured to be 363 and 0.04 at 100 kHz. These results might be advantageous for nonvolatile ferroelectric random access memory (NVFRAM) and dynamic random access memory (DRAM). PACS 77.84.Dy; 77.22.-d; 68.55.Jk     

Microstructures and impedance studies of Bi<Subscript>3.15</Subscript>Nd<Subscript>0.85</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films

Microstructures and impedance characteristics of chemical-solution-derived Bi_3.15Nd_0.85Ti₃O₁₂ thin films were studied as functions of temperature. A dielectric anomaly was found at around 450°C, corresponding to the paraelectric to ferroelectric transition. Via complex impedance studies, grain and grain boundary contributions to the impedance were separated. The resistance of grain and grain boundaries is found governed by the same kind of space charge with an activation energy around 1.1 eV, close to that of oxygen vacancies in perovskite ferroelectrics. The low temperature ac conductance of BNdT thin films shows a frequency dispersion, which can also be ascribed to space charges mainly due to oxygen vacancies. The results were compared with SrBi₂Ta₂O₉ in terms of oxygen vacancy conductivity.     

Effect of substitution of vanadium on the structure and electrical properties of Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films

The ferroelectric and dielectric properties of Bi_4-xLa_xTi₃O₁₂ (BLT) and Bi_4-xLa_xTi_2.97V_0.03O₁₂ (BLTV) thin films deposited on (111)Pt/Ti/SiO₂/Si substrates using a chemical solution method were investigated. The BLTV thin films showed a larger remanent polarization (9.6 C/cm²) than the BLT thin films (6.5 C/cm²), while the coercive field for both thin films was nearly the same. The capacitance of the films as a function of a small ac driving field was measured, and the data were processed using Rayleighs law. The results show that the Rayleigh constant of the BLT films was smaller than that of the BLTV films, indicating that the defect concentration was lower in the latter case. The superior ferroelectricity of the BLTV films was attributed to a decrease of both the (001) orientation and the defect concentration. PACS 77.80.Bh; 77.55.+f     

Structural and optical properties of Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric thin films prepared by chemical solution methods

Ferroelectric Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films have been grown on Pt/Ti/SiO₂/Si substrates by chemical solution methods. X-ray diffraction analysis shows that BLT thin films are polycrystalline with (171)-preferential orientation. Atomic force microscopy investigation shows that they have large grains about 120 nm in size. A Pt/BLT/Pt capacitor has been fabricated and showed excellent ferroelectricity, with a remnant polarization and coercive field of 24 μC/cm² and 116 kV/cm, respectively. The capacitor shows no polarization fatigue up to 10⁹ switching cycles. The optical constants (n,k) of the BLT thin films in the wavelength range 0.35–1.7 μm were obtained by spectroscopic ellipsometry measurements, and the band-gap energy was found to be about 3.25 eV. Received: 16 October 2001 / Accepted: 6 January 2002 / Published online: 3 June 2002 RID="*" ID="*"Corresponding author. Fax: +86-21/65830-734, E-mail: gswang@mail.sitp.ac.cn     

Preparation and electrical properties of Bi<Subscript>3.25</Subscript>Pr<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric thin films

Bi_3.25Pr_0.75Ti₃O₁₂ (BPT) ferroelectric thin films have been prepared by chemical solution deposition on platinized Si substrates. Well-crystallized BPT films can be achieved by 600 °C rapid thermal annealing. The film surface is smooth and crack-free, composed of uniform spherical grains around 90–100 nm in diameter. The electrical properties of Pt/BPT/Pt thin film capacitors were characterized by hysteresis and impedance measurements. The remanent polarization of 700 °C annealed BPT films is around 20 C/cm² at 120-kV/cm stimulus field. The dielectric constant is around 380 at 10 kHz, 100-mV amplitude. The remanent polarization of BPT film showed a slight reduction, 10% of its original value, after 2.8×10⁹ cycles, while a 30% reduction of non-volatile polarization was observed. PACS 81.15.-z; 77.55.+f; 77.22.Gm     

Highly (100) oriented Pb(Zr<Subscript>0.52</Subscript>Ti<Subscript>0.48</Subscript>)O<Subscript>3</Subscript>/LaNiO<Subscript>3</Subscript> films grown on amorphous substrates by pulsed laser deposition

Pb(Zr_0.52Ti_0.48)O₃ (PZT)/LaNiO₃ (LNO) thin films with highly (100) out of plane orientation were produced on SiO₂/Si(100) and alkaline earth aluminosilicate glass substrates by pulsed laser deposition (PLD). Orientations of both PZT and LNO films were evaluated using X-ray diffraction. The pure (100)-oriented PZT/LNO films were obtained under optimized deposition conditions. Time of flight-secondary ion mass spectrometry analysis showed that LNO could effectively block interdiffusion between the PZT films and the substrates. Fairly smooth surfaces of the PZT films with roughness of about 4 nm were observed using an atomic force microscope. Cross sectional examination revealed that the films grew in columnar grains. The PZT films grown on both SiO₂/Si and glass substrates demonstrated very good ferroelectric characteristic at room temperature with remnant polarization of up to 26 μC/cm². PACS 79.20.DS; 77.84.DY; 78.70.Ck     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

Ferroelectric phase transition of Nb-doped Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ceramics

Bi_3.25La_0.75Ti_3-yNb_yO₁₂ (y=0.0, 0.03, 0.09, 0.15, 0.21) were synthesized using the solid-state reaction method. The effects of Nb doping on ferroelectric properties were studied through dielectric and P-E measurements. The value of P_r increases with increasing Nb content. Bi_3.25La_0.75Ti_3-yNb_yO₁₂ ceramics exhibit a maximum remanent polarization of P_r=27 μC/cm² at an Nb content of y=0.09. These results indicate that Nb doping can improve the ferroelectric properties of BLT ceramics. The Curie temperature, T_c, decreased with increasing Nb-content, and the ferroelectric phase transition of BLTNy is a second-order transition without thermal hysteresis. PACS 77.55.+f; 77.80.-e; 77.22.Jp     

Electric and magnetic properties of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/Pb(Zr<Subscript>0.52</Subscript>Ti<Subscript>0.48</Subscript>)O<Subscript>3</Subscript> bilayer thin films prepared by pulsed-laser deposition

CoFe₂O₄ (CFO) thin film with highly (111)-preferential orientation was first deposited on the silicon substrate by a pulsed-laser deposition, and then Pb(Zr_0.52Ti_0.48)O₃ (PZT) layers were deposited with different oxygen pressures to form the bilayer CFO/PZT nanocomposite thin films. X-ray diffraction showed that the PZT preferential orientation was strongly dependant on the oxygen pressure. The smooth film surface was obtained after depositing the CFO and PZT layers. The bilayer thin films exhibit good ferromagnetic and ferroelectric properties, and a low leakage current density of 0.004 μA/cm² at 50 kV/cm. The leakage current density curves show loops for the electric polarized field when the electric field reverses. PACS 77.84.Lf; 75.80+q; 81.05.Zx; 81.15.Fg     

Large optical nonlinearity in CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> thin films

CaCu₃Ti₄O₁₂ (CCTO) thin films were successfully prepared on LaAlO₃ substrates by pulsed laser deposition technique. We measured the nonlinear optical susceptibility of the thin films using Z-scan method at a wavelength of 532 nm with pulse durations of 25 ps and 7 ns. The large values of the third-order nonlinear optical susceptibility, χ ⁽³⁾, of the CCTO film were obtained to be 2.79×10⁻⁸ esu and 3.30×10⁻⁶ esu in picosecond and nanosecond time regimes, respectively, which are among the best results of some representative nonlinear optical materials. The origin of optical nonlinearity of CCTO films was discussed. The results indicate that the CCTO films on LaAlO₃ substrates are promising candidate materials for applications in nonlinear optical devices.     

Bottom-up fabrication and piezoelectric properties of CaBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> micro-plateaus

CaBi₄Ti₄O₁₅ (CBTi144) micro-plateaus were fabricated on Si wafers and Pt foils using a self-assembled monolayer (SAM) and a complex metal alkoxide solution. The micro-plateaus are delineated by metal masks, which are used for shadowing against the ultraviolet (UV) irradiation for decomposition of SAM to make the surface hydrophilic. The micro-plateaus crystallized to a ferroelectric phase with random orientation. The crystallization depended on the SAM-derived ultra thin layers at the surface of the substrates. The primitive PFM measurements without any top electrodes confirmed that the micro-plateaus exhibited the piezoresponse behaviors. The piezoelectric constant, d₃₃, had some distribution, and the maximum d₃₃ was confirmed as about 45 pm/V, which is identical to the d₃₃ of the polar-axis oriented CBTi144 thin films. PACS 77.84.-s; 81.20.Fw; 77.65.-j     

Ferroelectric properties of bilayer structured Pb(Zr0.52Ti0.48)O3/SrBi2Ta2O9 (PZT/SBT) thin films on Pt/TiO2/SiO2/Si substrates

Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films with large remanent polarization and SrBi₂Ta₂O₉ (SBT) thin films with excellent fatigue-resisting characteristic have been widely studied for non-volatile random access memories, respectively. To combine these two advantages_, bilayered Pb(Zr_0.52Ti_0.48)O₃/SrBi₂Ta₂O₉ (PZT/SBT) thin films were fabricated on Pt/TiO₂/SiO₂/Si substrates by chemical solution deposition method. X-ray diffraction patterns revealed that the diffraction peaks of PZT/SBT thin films were completely composed of PZT and SBT, and no other secondary phase was observed. The electrical properties of the bilayered structure PZT/SBT films have been investigated in comparison with pure PZT and SBT films. PZT/SBT bilayered thin films showed larger remanent polarization (2P_r) of 18.37 μC/cm² than pure SBT and less polarization fatigue up to 1 × 10⁹ switching cycles than pure PZT. These results indicated that this bilayered structure of PZT/SBT is a promising material combination for ferroelectric memory applications.     

Dielectric investigations in Sr<Subscript>0.75</Subscript>Ba<Subscript>0.25</Subscript>Nb<Subscript>2</Subscript>O<Subscript>6</Subscript> relaxor ferroelectric thin films

The dielectric properties of Sr_0.75Ba_0.25Nb₂O₆ relaxor ferroelectric thin films were carefully analyzed. In contrast to bulk samples which present three distinct dielectric relaxation phenomena Sr_0.75Ba_0.25Nb₂O₆ thin films present only two of them. The suppression of the third anomaly can be mainly attributed to the narrow grain size distribution of nanograins and weak tensile strains imposed to the film from the substrate. The whole set of results point to the interpretation of a dielectric response characteristic of mesoscopic structure, which is composed of clusters and nanodomains.     

Si基Bi4Ti3O12铁电薄膜的制备与特性研究

采用sol-gel工艺, 在分层快速退火的工艺条件下成功地制备了高质量Si基Bi_{4Ti3O12铁电薄膜. 研究了Si基Bi4Ti3O12薄膜的生长行为、铁电性能、C-V特性和疲劳特性. 研究表明: Si基Bi4Ti3O12薄膜具有随退火温度升高沿c轴择优生长的趋势; 退火温度通过影响薄膜的晶粒尺寸、生长取向和薄膜中载流子的浓度来改变Si基Bi关键词： sol-gel法 铁电薄膜 4Ti3O12')" href="#">Bi4Ti3O12 C-V特性}     

Temperature-dependent ferroelectric and dielectric properties of Bi3.25La0.75Ti3O12 thin films

To investigate temperature-dependent ferroelectric and dielectric properties of ferroelectric films, Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were prepared on Pt-coated silicon substrates by pulsed laser deposition. The ferroelectric and dielectric behaviors have been studied in a wide temperature range from 80 K to room temperature. The saturated polarization (P_sat) decreases with decreasing temperature and decreasing electric field, whereas remnant polarization (P_r) shows a more complex temperature dependence. These results, which can be well explained based on a temperature-dependent charged defects-domain wall interaction model, might be helpful for further understanding the domain switching behavior. Based on these results, an alternative way to investigate temperature-dependent ferroelectric fatigue is proposed and experimentally carried out. The measured fatigue rate is found to be linearly dependent on temperature, consistent with the report on Pb(Zr,Ti)O₃ films. Temperature-dependent dielectric measurements of the films further confirm the above explanation.     

Effects of vanadium doping on structure and electrical properties of SrBi4Ti4O15 thin films

The effects of vanadium(V) doping into SrBi₄Ti₄O₁₅ (SBTi) thin films on the structure, ferroelectric, leakage current, dielectric, and fatigue properties have been studied. X-ray diffraction result showed that the crystal structure of the SBTi thin films with and without vanadium is the same. Enhanced ferroelectricity was observed in the V-doped SrBi₄Ti₄O₁₅ (SrBi_4−x/3Ti_4−xV_xO₁₅, SBTiV-x (x = 0.03, 0.06, and 0.09)) thin films compared to the pure SrBi₄Ti₄O₁₅ thin film. The values of remnant polarization (2P_r) and coercive field (2E_c) of the SBTiV-0.09 thin film capacitor were 40.9 μC/cm² and 105.6 kV/cm at an applied electric field of 187.5 kV/cm, respectively. The 2P_r value is over five times larger than that of the pure SBTi thin film capacitor. At 100 kHz, the values of dielectric constant and dielectric loss were 449 and 0.04, and 214 and 0.06 for the SBTiV-0.09 and the pure SBTi thin film capacitors, respectively. The leakage current density of the SBTiV-0.09 thin film capacitor measured at 100 kV/cm was 6.8 × 10⁻⁹ A/cm², which is more than two and a half orders of magnitude lower than that of the pure SBTi thin film capacitor. Furthermore, the SBTiV-0.09 thin film exhibited good fatigue endurance up to 10¹⁰ switching cycles. The improved electrical properties may be related to the reduction of internal defects such as bismuth and oxygen vacancies with changes in the grain size by doping of vanadium into SBTi.     

Polarization processes in BaBi<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> and SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics in infralow-frequency fields

The dielectric nonlinearity in BaBi₂Nb₂O₉ and SrBi₂Ta₂O₉ layered ceramics was studied by measuring their polarization loops and reverse dependences of permittivity. It was shown that the features of the dielectric response of BaBi₂Nb₂O₉ and SrBi₂Ta₂O₉ in strong fields can be explained by glass-like properties and the contribution of the domain structure of the ferroelectric material to repolarization processes, respectively.     

Si基Bi3.25La0.75Ti3O12铁电薄膜的制备与特性研究

采用Sol-Gel工艺低温制备了Si基Bi_3.25La_0.75Ti₃O₁₂铁电薄膜.研究了退火温度对薄膜微观结构、介电特性与铁电性能的影响.500℃退火处理的Bi_3.25La_0.75Ti₃O₁₂薄膜未能充分晶化，晶粒细小且有非晶团聚，介电与铁电性能均较差.高于550℃退火处理的Bi_3.25La_{0.75 关键词： 铁电薄膜 3.25}La_0.75Ti₃O₁₂')" href="#">Bi_3.25La_0.75Ti₃O₁₂ Sol-Gel工艺     

La掺杂对Bi4Ti3O12薄膜铁电性能的影响

利用Sol-Gel法在Pt/Ti/SiO₂/Si衬底上制备出Bi₄Ti₃O₁₂和Bi_3.25La_0.75Ti₃O₁₂薄膜，研究了La掺杂对Bi₄Ti₃O₁₂薄膜的晶体结构、铁电性能和疲劳特性的影响，发现La掺杂没有改变Bi₄Ti₃O₁₂薄膜的基本晶体结构，并且提高了Bi₄Ti₃O₁₂铁电薄膜的剩余极化值和抗疲劳性能，对La掺杂改善Bi₄Ti₃O₁₂铁电薄膜性能的机理进行了讨论. 关键词： 铁电性能 4Ti₃O₁₂薄膜')" href="#">Bi₄Ti₃O₁₂薄膜 3.25La_0.75Ti₃O₁₂薄膜')" href="#">Bi_3.25La_0.75Ti₃O₁₂薄膜 sol-gel法 La掺杂     

Structural and electrical properties of 0.7Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>–0.3PbTiO<Subscript>3</Subscript> thin films grown on Ir/MgO buffered Si(100) substrates

Thin films of 0.7Pb(Mg_1/3Nb_2/3)O₃–0.3PbTiO₃ (PMN-PT) have been grown on Ir/MgO buffered Si(100) substrates at different substrate temperatures by pulsed laser deposition. Crystalline phases as well as preferred orientations in the PMN-PT films were investigated by X-ray diffraction analysis (XRD). The microstructure, dielectric and ferroelectric properties of PMN-PT film prepared at 650 °C were studied. The results show that the film prepared at 650 °C exhibits pure perovskite phase and single c-axis orientation. The dielectric constant and dissipation factor of the single c-axis oriented film are 1000 and 0.04 at a frequency of 1 kHz, while the remnant polarization and coercive field are about 13.0 μC/cm² and 100 kV/cm under an electric field of 480 kV/cm, respectively. PACS 81.15.Fg; 77.80.-e; 77. 22.Ej; 77.55.+f; 85.50.Gk