Degradation of rhodamine B photocatalyzed by Eu-doped CdS nanowires illuminated by visible radiation

CdS nanowires doped with different contents of Eu dopant were synthesized by solvothermal method. XRD, SEM, TEM and Raman analyses certified that the as-synthesized samples were hexagonal CdS uniform nanowires. The pure CdS nanowires were 1–3 ?μm long and 80 ?nm diameter with the 1st and 2nd order longitudinal phonon modes at 298 and 594 ?cm^?1. The 3% Eu-doped CdS wires were 800 ?nm–2.5 ?μm long and 75 ?nm diameter with the 1st and 2nd order longitudinal phonon modes at 296 and 593 ?cm^?1. CdS nanowires grew along the [001] direction due to the surface energy effect. The photocatalytic properties of CdS and Eu-doped CdS nanowires were investigated for the degradation of rhodamine B (RhB) illuminated by visible radiation. In this research, Eu dopant played the role in promoting the photocatalytic kinetics because Eu³⁺ ions act as an electron acceptor to promote charge separation and photocatalytic activity. Both ^●OH and ^●O₂^? were the main active radicals used to transform RhB molecules into CO₂, H₂O and other intermediates.     

Comparative study on transport properties of N-, P-, and As-doped SiC nanowires: Calculated based on first principles

According to the one-dimensional quantum state distribution, carrier scattering, and fixed range hopping model, the structural stability and electron transport properties of N-, P-, and As-doped SiC nanowires(N-SiCNWs, P-SiCNWs, and As-SiCNWs) are simulated by using the first principles calculations. The results show that the lattice structure of NSiCNWs is the most stable in the lattice structures of the above three kinds of doped SiCNWs. At room temperature,for unpassivated SiCNWs, the doping effect of P and As are better than that of N. After passivation, the conductivities of all doped SiCNWs increase by approximately two orders of magnitude. The N-SiCNW has the lowest conductivity. In addition, the N-, P-, As-doped SiCNWs before and after passivation have the same conductivity–temperature characteristics,that is, above room temperature, the conductivity values of the doped SiCNWs all increase with temperature increasing.These results contribute to the electronic application of nanodevices.     

Interfacial Engineering in PtNiCo/NiCoS Nanowires for Enhanced Electrocatalysis and Electroanalysis

Searching for new anti-poisoning Pt-based catalysts with enhanced activity for alcohol oxidation is the key in direct alcohol fuel cells (DAFCs). However, in the traditional strategy for designing bimetallic or multimetallic alloy is still difficult to achieve a satisfactory heterogeneous electrocatalyst because the activity often depends on only the surface atoms. Herein, we fabricate the multicomponent active sites by creating a sulfide structure on 1D PtNiCo trimetallic nanowires (NWs), to give a PtNiCo/NiCoS interface NWs (IFNWs). Owing to the presence of sulfide interfaces, the PtNiCo/NiCoS IFNWs enable an impressive methanol/ethanol oxidation reaction (MOR/EOR) performance and excellent anti-CO poisoning tolerance. They have the MOR and EOR mass activities of 2.25 Amg^-1_Pt and 1.62 Amg^-1_Pt, around 1.26, 3.21 and 1.46, 2.96 times higher than those of PtNiCo NWs and commercial Pt/C, respectively. CO-stripping and XPS measurements further demonstrate that the new interfacial structure and optimal bonding of Pt−CO can result in accelerating the removal of surface adsorbed carbonaceous intermediates. Moreover, such a unique structure has also demonstrated a much-improved ability for the electrochemical detection of some important molecules (H₂O₂ and NH₂NH₂).     

Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.     

Synergism of Interface and Electronic Effects: Bifunctional N-Doped Ni3S2/N-Doped MoS2 Hetero-Nanowires for Efficient Electrocatalytic Overall Water Splitting

The realization of water electrolysis on the basis of highly active, cost-effective electrocatalysts is significant yet challenging for achieving sustainable hydrogen production from water. Herein, N-doped Ni₃S₂/N-doped MoS₂ 1D hetero-nanowires supported by Ni foam (N-Ni₃S₂/N-MoS₂/NF) are readily synthesized through a chemical transformation strategy by using NiMoO₄ nanowire array growth on Ni foam (NiMoO₄/NF) as the starting material. With the in situ generation of Ni₃S₂/MoS₂ heterointerfaces within nanowires and the incorporation of N⁻ anions, an extraordinary hydrophilic nature with abundant, well-exposed active sites and optimal reaction dynamics for both oxidation and reduction of water are obtained. Attributed to these properties, as-converted N-Ni₃S₂/N-MoS₂/NF exhibits highly efficient electrocatalytic activities for both hydrogen and oxygen evolution reactions under alkaline conditions. The superior bifunctional properties of N-Ni₃S₂/N-MoS₂/NF enable it to effectively catalyze the overall water-splitting reaction.     

Vertical copper oxide nanowire arrays attached three-dimensional macroporous framework as a self-supported sensor for sensitive hydrogen peroxide detection

A hierarchical nanostructure consisting of uniform copper oxide nanowires vertically grown on three-dimensional copper framework (CuO NWs/3D-Cu foam) was prepared by a two-step synthetic process. The uniform CuO NWs anchored onto the 3D foam exhibited outstanding electrocatalytic activity towards hydrogen peroxide reduction due to the unique one‐dimensional direction with its excellent catalytic activity and large surface area of 3D substrate, which enhanced electroactive sites and charge conductivity. As a result, a wide linear detection range of 1 µM–1 mM, good sensitivity of 8.87 µA/(mM ⋅ cm²), low detection limit of 0.98 µM, and rapid response time of 5 s to hydrogen peroxide were achieved under a working potential of −0.4 V in phosphate buffer solution (pH of 7.4). In addition, the CuO NWs/3D-Cu foam material showed excellent selectivity to hydrogen peroxide and good resistance against poisonous interferents, including ascorbic acid, dopamine, urea, uric acid, and potassium chloride. Furthermore, the CuO NWs/3D-Cu foam presented good reproducibility, stability, and accurate detection for hydrogen peroxide in real sample; therefore, it may be considered to be a potential free-standing hydrogen peroxide sensor in practical analysis applications.     

Growth of Hydrophilic CuS Nanowires via DNA‐Mediated Self‐Assembly Process and Their Use in Fabricating Smart Hybrid Films for Adjustable Chemical Release

Facile growth of CuS nanowires through self‐assembly and their application as building blocks for near‐infrared light‐responsive functional films have been demonstrated. It is found that DNA is a key factor in preparing the CuS material with defined nanostructure. An exclusive oriented self‐aggregate growth mechanism is proposed for the growth of the nanowires, which might have important implications for preparing advanced, sophisticated nanostructures based on DNA nanotechnology. By employing the hydrophilic CuS nanowire as an optical absorber and thermosensitive nanogel as guest reservoir inside alginate film, a new platform for the release of functional molecules has been set up. In vitro studies have shown that the hybrid film possesses excellent biocompatibility and the release rate of chemical molecules from the film could be controlled with high spatial and temporal precision. Our novel approach and the resulting outstanding combination of properties may advance both the fields of DNA nanotechnology and light‐responsive devices.