Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

Blocking the defect sites on ultrathin Pt nanowires with Rh atoms to optimize the reaction path toward alcohol fuel oxidation

Anodic electrocatalyst plays the core role in direct alcohol fuel cells (DAFCs), while traditional Pt-catalysts suffer from limited catalytic activity, high over potential and severe CO poisoning. Herein, by selectively depositing Rh atoms on the defective-sites of Pt nanowires (NWs), we developed a new Pt@Rh NW electrocatalyst that exhibited enhanced electrocatalytic performance for both methanol oxidation (MOR) and ethanol oxidation (EOR). Both cyclic voltammetry (CV) and in-situ infrared spectroscopy revealed that the presence of Rh atoms suppressed the generation of poisonous intermediates and completely oxidized alcohols molecule into CO₂. Atomic resolusion spherical aberration corrected high-angle annular dark field scanning transmission electron microscopy (CS-HAADF-STEM) and energy-dispersive X-ray spectroscopy (EDS) mapping analysis revealed that Rh atoms were primarily deposited on the defective sites of Pt NWs. Meanwhile, the presence of Rh atoms also modified the electronic state of Pt atoms and therefore lowered the onset potential for alcohols oxidation potential. This work gives the first clear clue on the role of the defective sites of Pt nanocatalyst poisoning, and propose that selectively blocking these sites with trace amount of Rh is an effective strategy in designing advantageous electrocatalysts.     

Pd-Enriched-Core/Pt-Enriched-Shell High-Entropy Alloy with Face-Centred Cubic Structure for C1 and C2 Alcohol Oxidation

High-entropy alloy nanoparticles (HEA NPs) have aroused great interest globally with their unique electrochemical, catalytic, and mechanical properties, as well as diverse activity and multielement tunability for multi-step reactions. Herein, a facile low-temperature synthesis method at atmospheric pressure is employed to synthesize Pd-enriched-HEA-core and Pt-enriched-HEA-shell NPs with a single phase of face-centred cubic structure. Interestingly, the lattice of both Pd-enriched-HEA-core and Pt-enriched-HEA-shell enlarge during the formation process of HEA, with tensile strains included in the core and shell of HEA. The as-obtained PdAgSn/PtBi HEA NPs show excellent electrocatalytic activity and durability for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The specific (mass) activity of PdAgSn/PtBi HEA NPs for MOR is 4.7 mA cm⁻² (2874 mA mg_(Pd+Pt)⁻¹), about 1.7 (5.9) and 1.5 (4.8) times higher than that of commercial Pd/C and Pt/C catalysts, respectively. Additional to high-entropy effect, Pt sites and Pd sites on the interface of the HEA act synergistically to facilitate the multi-step process towards EOR. This study offers a promising way to find a feasible route for scalable HEA manufacturing with promising applications.     

Preparation of Surfactant-Free Pt and PtRu Nanoparticles with High Activity for Methanol Oxidation

A simple and green approach to synthesize highly active electro-catalysts for methanol oxi- dation reaction （MOR） without using any organic agents is described. Pt nanoparticles are directly deposited on the pre-cleaned and pre-oxidized multiwall carbon nanotubes （MWC- NTs） from Pt salt by using CO as the reductant. MOR activity has been characterized by both cyclic voltammetry and chronoamperometry, the current density and mass specific current at the peak potential （ca. 0.9 V vs. RHE） reaches 11.6 mA/cm^2 and 860 mA/mgpt, respectively. After electro-deposition of Ru onto the Pt/MWCNTs surface, the catalysts show steady state mass specific current of 20 and 80 mA/mgpt at 0.5 and 0.6 V, respectively.     

Facile Synthesis Of Composition‐Controllable PtPdAuTe Nanowires As Superior Electrocatalysts For Direct Methanol Fuel Cells

Multicomponent Pt‐based nanowires (NWs) have attracted widespread attention as eletrocatalysts toward direct alcohol fuel cells because of their unique one‐dimensional structure and high reaction dynamics. Quaternary PtPdAuTe NWs are designed via a facile template method, and NWs with a different composition are obtained by adjusting the feed ratio of metal precursors. The direct displacement reaction of metal precursors with Te NWs and the partial oxidation of Te lead to the formation of quaternary NWs. The rough surface and abundant reactive sites deriving from the rearrangement of metal atoms on the Te NWs surface endow the PtPdAuTe NWs with a superior electrocatalytic property and durability for methanol oxidation. The Pt₂₀Pd₂₀Au₁₀Te₅₀ NWs display the largest mass activity and best stability among all catalysts. The preparation of PtPdAuTe NWs could provide a viable strategy for the preparation of other multicomponent NWs.     

Single-Cu-atoms anchored on 3D macro-porous carbon matrix as efficient catalyst for oxygen reduction and Pt co-catalyst for methanol oxidation

Single metal atoms immobilized on a carbon substrate are of great potential for enhancing the catalytic activities for oxygen reduction and methanol oxidation reactions（ORR/MOR） owing to the maximized atom utilization. Herein, single copper atoms（SCAs） are loaded on macro-porous nitrogen-doped carbon（Cu-NC） derived from zeolitic imidazolate framework-8（ZIF-8）, which are used as catalysts for ORR and Pt-supports for MOR. For ORR, the catalyst marked as Cu-NC-3 exhibits a higher peak potential of ...     

Structural and Electronic Effects of Carbon‐Supported PtxPd1−x Nanoparticles on the Electrocatalytic Activity of the Oxygen‐Reduction Reaction and on Methanol Tolerance

We report a systematic investigation on the structural and electronic effects of carbon‐supported Pt_xPd_1?x bimetallic nanoparticles on the oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in acid electrolyte. Pt_xPd_1?x/C nanocatalysts with various Pt/Pd atomic ratios (x=0.25, 0.5, and 0.75) were synthesized by using a borohydride‐reduction method. Rotating‐disk electrode measurements revealed that the Pt₃Pd₁/C nanocatalyst has a synergistic effect on the ORR, showing 50 % enhancement, and an antagonistic effect on the MOR, showing 90 % reduction, relative to JM 20 Pt/C on a mass basis. The extent of alloying and Pt d‐band vacancies of the Pt_xPd_1?x/C nanocatalysts were explored by extended X‐ray absorption fine‐structure spectroscopy (EXAFS) and X‐ray absorption near‐edge structure spectroscopy (XANES). The structure–activity relationship indicates that ORR activity and methanol tolerance of the nanocatalysts strongly depend on their extent of alloying and d‐band vacancies. The optimal composition for enhanced ORR activity is Pt₃Pd₁/C, with high extent of alloying and low Pt d‐band vacancies, owing to favorable O? O scission and inhibited formation of oxygenated intermediates. MOR activity also shows structure dependence. For example, Pt₁Pd₃/C with Pt_rich?corePd_rich?shell structure possesses lower MOR activity than the Pt₃Pd₁/C nanocatalyst with random alloy structure. Herein, extent of alloying and d‐band vacancies reveal new insights into the synergistic and antagonistic effects of the Pt_xPd_1?x/C nanocatalysts on surface reactivity.     

On Mixed-Valence Dinuclear PtII,PtIII Nucleobase Complexes Derived from cis-Diamineplatinum(II): Effect of steric bulk of amine ligands on the Pt-oxidation state

A series of closely related dinuclear (head-head) Pt^II complexes of general composition cis-[a₂PtL₂Pta′₂]²⁺ with a,a′ = NH₃ or CH₃NH₂ and L = 1-methyluracilate-N3,O4 (1-MeU) or 1-methylthyminate-N3,O4 (1-MeT) has been prepared and the solution behavior toward Ce^IV oxidation studied. The X-ray crystal structure of a representative example cis-[(CH₃NH₂)₂Pt(1-MeU)₂Pt(CH₃NH₂)₂](ClO₄)₂ · 0.5 H₂O ( 1b ), has been determined: Monoclinic, space group P2₁/c, a = 11.907(7) Å, b = 19.087(14) Å, c = 12.525(7) Å, β = 90.49(4)°, Z = 4. Oxidation of these diplatinum(II) complexes ([Pt^2.0]₂) with Ce^IV in aqueous solution to the corresponding diplatinum(III) species ([Pt^3.0]₂) proceeds via tetranuclear [Pt^2.25]₄ or dinuclear [Pt^2.5]₂ mixed-valence state compounds, depending on the nature of the a′ ligands: with a′ = NH₃, blue green [Pt^2.25]₄ forms, whereas with a′ = CH₃NH₂, purple [Pt^2.5]₂ represents the intermediate. This difference is interpreted in terms of differences in bulk between NH₃ and CH₃NH₂ ligands trans to the O(4) positions of the bridging nucleobases which influence the ability of dinuclear species to associate via the O(4)₂ Pt a₂′ faces.     

Relating the Composition of PtxRu100−x/C Nanoparticles to Their Structural Aspects and Electrocatalytic Activities in the Methanol Oxidation Reaction

A controlled composition‐based method—that is, the microwave‐assisted ethylene glycol (MEG) method—was successfully developed to prepare bimetallic Pt_xRu_100?x/C nanoparticles (NPs) with different alloy compositions. This study highlights the impact of the variation in alloy composition of Pt_xRu_100?x/C NPs on their alloying extent (structure) and subsequently their catalytic activity towards the methanol oxidation reaction (MOR). The alloying extent of these Pt_xRu_100?x/C NPs has a strong influence on their Pt d‐band vacancy and Pt electroactive surface area (Pt ECSA); this relationship was systematically evaluated by using X‐ray absorption (XAS), scanning electron microscopy (SEM) coupled with energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), density functional theory (DFT) calculations, and electrochemical analyses. The MOR activity depends on two effects that act in cooperation, namely, the number of active Pt sites and their activity. Here the number of active Pt sites is associated with the Pt ECSA value, whereas the Pt‐site activity is associated with the alloying extent and Pt d‐band vacancy (electronic) effects. Among the Pt_xRu_100?x/C NPs with various Pt:Ru atomic ratios (x=25, 50, and 75), the Pt₇₅Ru₂₅/C NPs were shown to be superior in MOR activity on account of their favorable alloying extent, Pt d‐band vacancy, and Pt ECSA. This short study brings new insight into probing the synergistic effect on the surface reactivity of the Pt_xRu_100?x/C NPs, and possibly other bimetallic Pt‐based alloy NPs.     

Accelerating Ethanol Complete Electrooxidation via Introducing Ethylene as the Precursor for the C−C Bond Splitting

The crucial issue restricting the application of direct ethanol fuel cells (DEFCs) is the incomplete and sluggish electrooxidation of ethanol due to the chemically stable C−C bond thereof. Herein, a unique ethylene-mediated pathway with a 100 % C1-selectivity for ethanol oxidation reaction (EOR) is proposed for the first time based on a well-structured Pt/Al₂O₃@TiAl catalyst with cascade active sites. The electrochemical in situ Fourier transform infrared spectroscopy (FTIR) and differential electrochemical mass spectrometry (DEMS) analysis disclose that ethanol is primarily dehydrated on the surface of Al₂O₃@TiAl and the derived ethylene is further oxidized completely on nanostructured Pt. X-ray absorption and density functional theory (DFT) studies disclose the Al component doped in Pt nanocrystals can promote the EOR kinetics by lowering the reaction energy barriers and eliminating the poisonous species. Strikingly, Pt/Al₂O₃@TiAl exhibits a specific activity of 3.83 mA cm⁻²_Pt, 7.4 times higher than that of commercial Pt/C and superior long-term durability.     

Influence of the chloride counterion on the redox reactivity of tetraammineplatinum(II) cation with octacyanotungstate(V) anion: Crystal structure of [Pt(NH3)4]2[W(CN)8]

The redox reaction between [Pt(NH₃)₄]²⁺ and [W(CN)₈]³⁻ in the presence of Cl⁻ anions in aqueous solution affords single crystals of [Pt^II(NH₃)₄]₂[W^IV(CN)₈] and [Pt^IV(NH₃)₄Cl₂]Cl₂. Trapped cyano ligands of [W(CN)₈]⁴⁻ rectangular antiprisms of D₂ point symmetry between parallel Pt(II) square planes show that the inner-sphere redox pathway is prohibited. The presence of Cl⁻ counterions enables the formation of [Pt(NH₃)₄Cl₂]Cl₂ as the product of the rare outer-sphere pathway of the oxidation of Pt(II) by [W(CN)₈]³⁻.     

Intermetallic Pt2Si: magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions, semi-conductor elements, such as Si, have hitherto not been examined. Here we report a simple synthesis of intermetallic Pt₂Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction (EOR). In comparison to Pt, the intermetallic Pt₂Si surface turns out to be much more active in catalyzing the EOR: the onset potential shifts negatively by 150 mV, and the current density at 0.6 V increases by a magnitude of one order. Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si, which can not only provide active surface oxygenated species to accelerate the removal of CO_ads, but also strongly alter the electronic property of Pt, as clearly indicated by the core-level shift in XPS spectrum.     

Metalizing carbon nanotubes with Pd–Pt core–shell nanowires enhances electrocatalytic activity and stability in the oxygen reduction reaction

We describe an electrostatically induced self-assembly method to prepare ultrathin Pd nanowires (NWs) surrounding individual multiwalled carbon nanotubes, i.e., Pd_NW/MWNTs, that are noticeable for improving performance in the oxygen reduction reaction (ORR) of their supported Pt_ML electrocatalyst. The carbonaceous by-products in MWNTs, rather than the nanotubes themselves, are modified with the oxygenated terminals to allow the negatively charged and hydrophilic surface while retaining the intrinsic nature of the MWNTs. Encompassing the nanotubes' length are 2-nm-thick Pd NWs that are closely packed and homogeneously dispersed due to the unique processes for preparing Pd_NW/MWNTs and its components. Although the crystal lattice of the Pd NWs expands somewhat, which should cause an unfavorable interaction with supported Pt_ML, this adverse effect is counterweighed by the shape-determined features of Pd NWs, including their high specific surface area, excellent contiguousness, and low-energy atomic configuration. Consequently, these distinct chemical and physical properties substantially expedite the desorption of the intermediates to refresh the active centers during the reduction of oxygen with the Pt_ML electrocatalyst while ensuring a desirable electron transfer rate, so improving the overall ORR kinetics. Indeed, Pt_ML/Pd_NW/MWNTs exhibits the Pt mass and specific activities of 1.45 A/mg_Pt and 0.65 mA/cm² _Pt, respectively, each of which are several times those of the Pt/C and even higher than those of the Pt_ML supported on Pd nanoparticles. These high activities remained over a long-term stability test using the latest US Department of Energy-established protocol.     

Photocatalytic oxidation of acetaldehyde by hybrid Pt/WO3–MOR photocatalysts under visible or sunlight irradiation

A hybrid photocatalyst was prepared from visible light-responsive Pt/WO₃ and siliceous mordenite (MOR) zeolite by simple impregnation with an aqueous solution of (NH₄)₁₀W₁₂O₄₁·5H₂O. Unmodified Pt/WO₃ had low photocatalytic activity in gas phase oxidation of acetaldehyde because of its low surface area (3–5 m²/g). In contrast, the Pt/WO₃–MOR had higher photocatalytic activity under focused sunlight and Xe lamp irradiation. Pt/WO₃–MOR with low WO₃ content (<20 wt%) adsorbed sufficient acetaldehyde, but absorption of light in the visible region was low. The optimum zeolite content enhancing the photocatalytic activity of Pt/WO₃ was estimated to be 30–50 % (w/w). Adsorption of the gaseous reactants and the efficiency of absorption of incident light are both important aspects of high photocatalytic activity.     

高CO耐性的金属间PtBi纳米片用于甲醇电氧化

我们通过热注入的方法制备了一种高CO耐性的金属间PtBi纳米片。所制备的金属间PtBi纳米片在甲醇氧化反应(MOR)中展现出优异的催化性能和良好的稳定性能,最大的质量活性高达4.09 A·mg_Pt^-1,接近商业Pt/C的3.2倍。计时电流-时间(I-t)稳定性测试之后,活性仅仅衰减5.7%,远低于商业Pt/C。CO吸附-脱附(CO-Stripping)曲线和循环伏安演变(CV-Evolution)曲线证实了金属间PtBi纳米片高的CO耐受性。     

Steering the Selectivity of Electrocatalytic Glucose Oxidation by the Pt Oxidation State

Electrocatalytic glucose oxidation can produce high value chemicals, but selectivity needs to be improved. Here we elucidate the role of the Pt oxidation state on the activity and selectivity of electrocatalytic oxidation of glucose with a new analytical approach, using high-pressure liquid chromatography and high-pressure anion exchange chromatography. It was found that the type of oxidation, i.e. dehydrogenation of primary and secondary alcohol groups or oxygen transfer to aldehyde groups, strongly depends on the Pt oxidation state. Pt⁰ has a 7-fold higher activity for dehydrogenation reactions than for oxidation reactions, while PtO_x is equally active for both reactions. Thus, Pt⁰ promotes glucose dialdehyde formation, while PtO_x favors gluconate formation. The successive dehydrogenation of gluconate is achieved selectively at the primary alcohol group by Pt⁰, while PtO_x also promotes the dehydrogenation of secondary alcohol groups, resulting in more complex reaction mixtures.     

A new insight into the promoting effects of transition metal phosphides in methanol electrooxidation

The construction of highly active catalysts for methanol oxidation reaction (MOR) is central to direct methanol fuel cells. Tremendous progress has been made in transition metal phosphides (TMPs) based catalysts. However, TMPs would be partially damaged and transformed into new substances (e.g., Pt-M-P composite, where M represents a second transition metal) during Pt deposition process. This would pose a large obstacle to the cognition of the real promoting effects of TMPs in MOR. Herein, Co₂P co-catalysts (Pt-P/Co₂P@NPC, where NPC stands for N and P co-doped carbon) and Pt-Co-P composite catalysts (Pt-Co-P/NPC) were controllably synthesized. Electrocatalysis tests show that the Pt-Co-P/NPC exhibits superior MOR activity as high as 1016 mA/mg_Pt, significantly exceeding that of Pt-P/Co₂P@NPC (345 mA/mg_Pt). This result indicates that the promoting effect is ascribed primarily to the resultant Pt-Co-P composite, in sharply contrast to previous viewpoint that Co₂P itself improves the activity. Further mechanistic studies reveal that Pt-Co-P/NPC exhibits much stronger electron interaction and thus manifesting a remarkably weaker CO absorption than Pt-P/Co₂P@NPC and Pt/C. Moreover, Pt-Co-P is also more capable of producing oxygen-containing adsorbate and thus accelerating the removal of surface-bonded CO*, ultimately boosting the MOR performance.     

Oxidation of carbon monoxide and formic acid on bulk and nanosized Pt–Co alloys

Bulk Pt₃Co and nanosized Pt₃Co and PtCo alloys supported on high area carbon were investigated as the electrocatalysts for the CO_ads and HCOOH oxidation. Pt₃Co alloy with Co electrochemically leached from the surface (Pt skeleton) was employed to separate electronic from ensemble and bifunctional effects of Co. Cyclic voltammetry in 0.1 M HClO₄ showed reduced amount of adsorbed hydrogen on Pt sites on Pt₃Co alloy compared to pure Pt. However, no significant difference in hydrogen adsorption/desorption and Pt-oxide reduction features between Pt₃Co with Pt skeleton structure and bulk Pt was observed. The oxidation of CO_ads on Pt₃Co alloy commenced earlier than on Pt, but this effect on Pt₃Co with Pt skeleton structure was minor indicating that bifunctional mechanism is stronger than the electronic modification of Pt by Co. The HCOOH oxidation rate on Pt₃Co alloy was about seven times higher than on bulk Pt when the reaction rates were compared at 0.4 V, i.e., in the middle of the potential range for the HCOOH oxidation. Like in the case of CO_ads oxidation, Pt skeleton showed similar activity as bulk Pt indicating that the ensemble effect is responsible for the enhanced activity of Pt₃Co alloy toward HCOOH oxidation. The comparison of CO_ads and HCOOH oxidation on Pt₃Co/C and PtCo/C with the same reaction on Pt/C were qualitatively the same as on bulk materials.     

Facile synthesis of N-doped carbon nanotubes grafted on N-doped carbon nanosheets co-encapsulating cobalt and molybdenum carbide nanoparticles for efficient methanol oxidation

Developing efficient electrocatalysts based on inexpensive and environment protection materials for methanol oxidation reaction (MOR) is crucial to new generation renewable energy storage and conversion processes, but it remains a major challenge. In our current research, N-doped carbon nanotubes grafted on N-doped carbon nanosheets co-encapsulating cobalt and Mo₂C nanoparticles (Co-Mo₂C/NCNT@NCN) are designed and synthesized by simple mixing and one-step annealing approach. After depositing Pt nanoparticles, Pt/Co-Mo₂C/NCNT@NCN exhibits superior catalytic activity and stability for MOR in acid medium; more precisely, it has a commendable mass activity of 842 mA/mg_Pt, which is 2.1 times of Pt/C-JM. And it is worth mentioning that its anti-CO poisoning ability and stability have also a visible improvement; the enhanced catalytic performance mainly benefits from the rich N doping, excellent structural features, and the synergistic effect of Co and Mo₂C. Therefore, this study opens up a new direction for designing and developing a favorable active multicomponent catalyst for MOR.     

高CO耐性的金属间PtBi纳米片用于甲醇电氧化

我们通过热注入的方法制备了一种高CO耐性的金属间PtBi纳米片。所制备的金属间PtBi纳米片在甲醇氧化反应(MOR)中展现出优异的催化性能和良好的稳定性能，最大的质量活性高达4.09 A·mg_Pt^-1，接近商业Pt/C的3.2倍。计时电流-时间(I-t)稳定性测试之后，活性仅仅衰减5.7%，远低于商业Pt/C。CO吸附-脱附(CO-Stripping)曲线和循环伏安演变(CV-Evolution)曲线证实了金属间PtBi纳米片高的CO耐受性。