Superparamagnetic and ferromagnetic behavior of ZnFe2O4 nanoparticles synthesized by microwave-assisted hydrothermal method

Zinc ferrite (ZnFe₂O₄) nanoparticles were successfully synthesized from Zn(NO₃)₂ · 6H₂O and Fe(NO₃)₃ · 9H₂O by microwave hydrothermal method at 150°C for 1 h. Cubic ZnFe₂O₄ with particle size below 7 nm was formed in the solution at pH ≥ 6. The crystallinity and particle size of ZnFe₂O₄ nanoparticles were increased after calcination. The effects of pH of the precursor solution and calcination on the particle size and crystallinity of the particles were studied. At room temperature the products show superparamagnetic and ferromagnetic properties, determined by their size. The formation mechanism of ZnFe₂O₄ was also discussed according to the experimental results.

     

Hydrothermal synthesis of hexagonal WO3 nanowires with high aspect ratio and their electrochemical properties for lithium-ion batteries

One dimensional WO₃ nanowires with high aspect ratio of >200 were synthesized by hydrothermal method. The effects of reaction temperature and time on phase and morphologies were studied and discussed. In this research, a suitable hydrothermal condition is at 200°C for 48 h. XRD, SEM, and TEM results show that the product is hexagonal WO₃ phase with diameter of 25 nm and several ten micrometers long with growth in the c direction. The electrochemical properties were tested for rechargeable lithium batteries. The WO₃ NWs electrode exhibits a stability trend over the 30 cycle testing. Some long-term activation process is attributed to the WO₃ NWs electrode during charge/discharge reaction.

     

Pd nanoparticle-modified Bi2WO6 nanoplates used for visible-light-driven photocatalyst

Pd nanoparticles supported on Bi₂WO₆ nanoplates used for visible-light-driven photocatalyst were successfully synthesized by photoreduction deposition method under visible-light irradiation. Different analytical techniques including X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and photoluminescence spectroscopy revealed that face-centered cubic metallic Pd nanoparticles were uniformly loaded on top of orthorhombic Bi₂WO₆ nanoplates to form heterostructure Pd/Bi₂WO₆ nanocomposites. Photocatalytic activities of pure Bi₂WO₆ sample and heterostructure Pd/Bi₂WO₆ nanocomposites were studied through the photodegradation of rhodamine B (RhB) under visible-light irradiation. The photocatalytic efficiency of Bi₂WO₆ was increased to the highest by being loaded with 5 wt% Pd and then decreased by being loaded with 10 wt% Pd. The improved photocatalytic efficiency caused by high-efficiency diffusion and separation of photo-generated charge carriers was explained and can lead to superior photodegradation of RhB under visible-light irradiation.

     

Characterization of MeWO4 (Me = Ba, Sr and Ca) nanocrystallines prepared by sonochemical method

Metal tungstates (MeWO₄, Me = Ba, Sr and Ca) were successfully prepared using the corresponding Me(NO₃)₂·2H₂O and Na₂WO₄·2H₂O in ethylene glycol by the 5 h sonochemical process. The tungstate phases with scheelite structure were detected with X-ray diffraction (XRD) and selected area electron diffraction (SAED). Their calculated lattice parameters are in accord with those of the JCPDS cards. Transmission electron microscopy (TEM) revealed the presence of nanoparticles composing the products. Their average sizes are 42.0 ± 10.4, 18.5 ± 5.1 and 13.1 ± 3.3 nm for Me = Ba, Sr and Ca, respectively. Interplanar spaces of the crystals were also characterized with high-resolution TEM (HRTEM). Their crystallographic planes are aligned in systematic array. Six different vibration wavenumbers were detected using Raman spectrometer and are specified as ν₁(A_g), ν₃(B_g), ν₃(E_g), ν₄(B_g), ν₂(A_g) and free rotation. Fourier transform infrared (FTIR) spectra provided the evidence of scheelite structure with W-O anti-symmetric stretching vibration of [WO₄]²⁻ tetrahedrons at 786-883 cm⁻¹. Photoluminescence emission of the products was detected over the range of 384-416 nm.     

Characterization of Li1−x Ni1+x O2 prepared by the thermal-assisted precipitation process

Li_1−x Ni_1+x O₂ was prepared by the thermal-assisted precipitation process of LiOH · H₂O and Ni(CH₃COO)₂ · 4H₂O at a pH of 6–13 followed by the high temperature calcination for a variety of prolonged times. Phases, morphologies and constituents were characterized using an x-ray diffractometer (XRD), a scanning electron microscope (SEM), an energy dispersive x-ray (EDX) analyzer an atomic absorption spectrophotometer (AAS) and titration. Maximum [I₍₀₀₃₎/I₍₁₀₄₎] and minimum [I_(006+102)/I₍₁₀₁₎] intensity ratios were used to determine the preparation conditions. In addition, possible formation reactions of the precursors and calcined products were proposed. The article was submitted by the authors in English.     

Effect of nanoporous In2O3 film fabricated on TiO2-In2O3 photoanode for photovoltaic performance via a sparking method

Journal of Solid State Electrochemistry - A simple and inexpensive sparking method was used to deposit body-centered cubic In2O3 film on TiO2 photoanode for 30–180 min for...     

Polymer-assisted hydrothermal synthesis of Bi2S3 nanostructured flowers

Nanostructured Bi₂S₃ was hydrothermally produced from Bi₂O₃ and thiocarbohydrazide in acidic solutions containing PVA, PEG and PVP. By using XRD, SAED and Raman spectrometry, the products were orthorhombic Bi₂S₃, with four vibration modes at 139.6, 253.7, 310 and 968.9 cm⁻¹. The phase was also in accordance with the diffraction patterns obtained by simulation. SEM, TEM and HRTEM show that the products are clusters of nanorods produced in polymer-free solution, and nanostructured flowers of nanospears, nanorods and nanoplates in the respective PVA-, PEG- and PVP-added solutions, with their growths in the same direction of [0 0 1]. A formation mechanism was also proposed according to their phase and morphologies.     

Degradation of rhodamine B photocatalyzed by Eu-doped CdS nanowires illuminated by visible radiation

CdS nanowires doped with different contents of Eu dopant were synthesized by solvothermal method. XRD, SEM, TEM and Raman analyses certified that the as-synthesized samples were hexagonal CdS uniform nanowires. The pure CdS nanowires were 1–3 ?μm long and 80 ?nm diameter with the 1st and 2nd order longitudinal phonon modes at 298 and 594 ?cm^?1. The 3% Eu-doped CdS wires were 800 ?nm–2.5 ?μm long and 75 ?nm diameter with the 1st and 2nd order longitudinal phonon modes at 296 and 593 ?cm^?1. CdS nanowires grew along the [001] direction due to the surface energy effect. The photocatalytic properties of CdS and Eu-doped CdS nanowires were investigated for the degradation of rhodamine B (RhB) illuminated by visible radiation. In this research, Eu dopant played the role in promoting the photocatalytic kinetics because Eu³⁺ ions act as an electron acceptor to promote charge separation and photocatalytic activity. Both ^●OH and ^●O₂^? were the main active radicals used to transform RhB molecules into CO₂, H₂O and other intermediates.     

BiOX (X = Cl,Br, and I) Nanoplates Prepared by Surfactant-Free Microwave Synthesis and Their Photocatalytic Performance

Russian Journal of Physical Chemistry A - Bismuth oxyhalide (BiOX; X = Cl, Br, and I) nanoplates were successfully synthesized by microwave irradiation of surfactant-free aqueous solutions. X-rays...     

Characterization of sp carbon produced by plasma deposition on gamma-TiAl alloys

Surfaces of two gamma-TiAl alloys, Ti-47%Al-2%Nb-2%Cr (MJ12) and Ti-47%Al-2%Nb-2%Mn + 0.8%TiB₂ (MJ47), were modified by acetylene plasma deposition at −3 kV bias voltage for 0.5-4 h. By using GIXRD and SAED, C (n-diamond), TiC, Al, AlTi, AlTi₂, AlTi₃, Al_0.64Ti_0.36 and Al₂Ti were detected on both alloys. Additional TiB₂ was detected on MJ47. XPS and Raman analyses revealed the presence of sp³ and sp² carbon deposited on the alloy surfaces with their binding energies of 283.9-284.8 eV for MJ12 and 283.9-285.0 eV for MJ47. Both sp³ and sp² contents were increased with the increase in the exposure times. The increasing rate of the first was less than that of the second, due to the stress developed in the films. Moiré fringe and crystallographic planes were detected using TEM. Knoop hardness of the deposited alloys, influenced by sp³ carbon, was increased with the increase in the exposure time. Those of MJ12 and MJ47 with 4 h deposition are 1.88 and 1.57 times of the corresponding untreated alloys, respectively.