Moisture barrier of AlxOy coating on poly(ethylene terephthalate), poly(ethylene naphthalate) and poly(carbonate) substrates

The moisture barrier property of Al_xO_y coated poly(ethylene terephthalate) (PET), poly(ethylene naphthalate) (PEN) and poly(carbonate) (PC), have been investigated. The differences in the morphology of the Al_xO_y sputtered grown on these substrate were investigated using atomic force microscopy (AFM). The initial growth of the Al_xO_y followed closely the topology of the substrate and an amplified roughness was observed. In the fully grown Al_xO_y, the comparative roughness followed that of the substrates. It has been found that a single layer Al_xO_y improved the moisture barrier of PET by an order of magnitude, PC by two orders of magnitude while no improvement was observed for PEN. UV-ozone treatment on PC further improved the moisture barrier, while no improvement was observed for PET and PEN. The comparative effects of the substrate surface roughness and surface energy on the moisture barrier are discussed.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Lifetime prediction of ABS polymers based on thermoanalytical data

The service life of ABS polymer, stabilized by 2-(3,5-di-tert-butyl-4-hydroxyanilino)-4,6-bis(octylthio)-1,3,5-triazine and containing 50% of a modifying rubber component, was estimated from oxidative induction times measured by DSC in isothermal mode in the temperature interval 140–170°C. The lifetime of ABS powder at the actual temperature of drying was predicted by linear extrapolation according to Arrhenius. However, the extrapolated value was much longer than the real lifetime determined from the long-term oven aging tests at 70 and 90°C, simulating the industrial drying process. The effect of changes in the apparent activation energy of oxidation due to antioxidant consumption during polymer aging is discussed.     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

PP/PC共混材料的研究概况

从加工方式对制备简单机械共混PP/PC共混物性能的影响,增容体系中增容剂的种类、增容效果和不同填充物对共混体系的增强效果三方面综述了近年来国内外对PP/PC共混材料的研究概况,指出了其研究方向和发展前景。     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

NMR频率综合器的微机控制

为实现ＰＴＳ系列频率综合器的微机控制，设计了一种简单的控制电路。在微机的控制下，通过该电路与微机的并行通讯口，用Ｃ语言编写的控制程序可以很方便的控制频率综合器的输出频率。控制程序采用菜单操作，电路所需的＋５Ｖ电源由微机提供，整个控制系统简单实用，值得推广。     

Synthesis of Ultra-Fine Columbite Powder MgNb2O6 by the Polymerized Complex Method

Pure MgNb₂O₆ powders with high specific surface area and high crystallinity have been successfully synthesized by the Polymerized Complex (PC) Method. A solution of water, citric acid, ethylene glycol and niobium and magnesium ions, was polymerized at 130°C by the water elimination and was calcined at 400°C for 2 h. The precursor formed was calcined at temperatures from 700°C to 1000°C in air to obtain the columbite phase. Thermal analysis, Raman spectroscopy, x-ray diffraction, adsorption/desorption hysteresis and scanning electron microscopy were used to investigate the polymer decomposition and the columbite phase evolution. No evidence for phase separation of crystalline MgCO₃ and Nb₂O₅ in Raman spectra and x-ray diffraction pattern as distinct intermediates were found, and the MgNb₂O₆ probably is formed through a single-step decomposition of oxycarbonate intermediate, as other double oxide synthesized by the PC Method, as indicated by the thermal decomposition of the precursor.