Optimization of biodiesel production via transesterification of soybean oil using α-MoO3 catalyst obtained by the combustion method

A catalyst based on MoO₃ was synthesized by a simple and fast pilot-scale combustion reaction method and applied to the conversion of soybean oil to biodiesel via transesterification. For that, the statistical analysis of the catalyst amount and temperature, factors that influence the process, was evaluated by means of central composite design 2². MoO₃ was characterized in terms of structure by X-ray diffraction (XRD), textural characterization Brunauer-Emmett-Teller (BET), density by helium pycnometry (DE), particle size analysis (DG) and acidity tests by temperature-programmed desorption of ammonia (NH₃-TPD), chemical analysis by X-ray fluorescence (EDX), morphology by scanning electron microscopy (SEM) and catalytic properties. The transesterification products were characterized by gas chromatography (GC), acidity index (AI) and kinematic viscosity (KV). The results indicate the catalyst formation with a surface area of 1.36 m²g^?1, and density of 4.5 g/cm³ which consists of a single crystalline phase of orthorhombic configuration, with total NH₃ acidity of 33.61 μ.mol/g. Morphological characterization revealed that the catalyst is formed by irregular plates of various sizes and shapes, with a wide sizes range of agglomerated particles. In the soybean oil transesterification reactions, the catalyst was active showing 96.9% conversion to ethyl esters. The experimental design was meaningful and predictive, with a reliability level of 95%. The statistical analysis identified temperature as a significant variable for the adopted planning. To conclude, a new single-phase catalyst (α-MoO₃) has been developed and successfully applied to the biodiesel Synthesis from soybean oil. These results have a positive and promising impact for biodiesel production by transesterification of soybean oil against ethanol.     

线上线下混合式实验教学模式的改革与探索

大学化学实验课程是培养材料、化学、化工等专业人才应用基本操作和理论解决实际问题的综合性实践训练环节。文章探讨了当前大学化学实验发展由于受到仪器设备大型化、专业化、成本大、更新快等因素限制出现瓶颈,设计了线上线下混合实验教学模式,进行相应的软硬件建设,并开展线上线下混合式实验教学模式的改革与探索。该教学模式具有良好的教学效果,并且可复制可推广,为创新人才的培养和实验教学的创新提供了有益的借鉴。     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Digital image correlation in experimental mechanics and image registration in computer vision: Similarities,differences and complements

Digital image correlation and image registration or matching are among the most widely used techniques in the fields of experimental mechanics and computer vision, respectively. Despite their applications in separate fields, both techniques primarily involve detecting the same physical points in two or more images. In this paper, a brief technical comparison of the two techniques is reviewed, and their similarities and differences as well as complements are presented. It is shown that some concepts from the image registration or matching technique can be applied to the digital image correlation technique to substantially enhance its performance, which can help broaden the applications of digital image correlation in scientific research and engineering practice.     

Review of RGB photoelasticity

Automatic methods of photoelasticity have had a significant progress with the development of automatic acquisition and image processing methods. This article concerns RGB photoelasticity, which allows the determination of the photoelastic retardation using, usually, a single acquisition of the isochromatic fringes in white light by a colour camera. In particular, the article presents an overview of the main characteristics of RGB photoelasticity that is influence of the quarter-wave plate error, number of acquisitions, type of light source, determination of low and high fringe orders, methods for searching the retardation, scanning procedures, calibration on a material different from that under test, combined use of the RGB and phase shifting methods. A short section on the applications of RGB photoelasticity completes the article.     

婴儿湿巾缓冲能力的测试——一个贴近生活的实验

为了有效提升学生在缓冲溶液学习过程中的学习兴趣及积极性,在此推荐一个将现实中的生活用品作为实验对象引入实验课教学过程中的案例。该实验设计将性质实验扩充到婴儿湿巾,将实验内容变为对婴儿湿巾工作原理的验证,而不再是过去简单的酸碱体系的配制及相关验证实验。通过该实验的实施,学生普遍反映能够有效激发其在学习缓冲溶液相关课程中的学习积极性与兴趣,并最终促使学生认知缓冲体系内pH变化的特点及缓冲机理。     

Pitfalls in the experimental recording of ultrasonic (backscatter) polar scans for material characterization

The ultrasonic polar scan (UPS), either in transmission, reflection or backscatter mode, is a promising non-destructive testing technique for the characterization of composites, providing information about the mechanical anisotropy, the viscoelastic damping, the surface roughness, and more. At present, the technique is merely being used for qualitative purposes. The limited quantitative exploration and use of the technique can be primarily ascribed to limitations of current theoretical models as well as the difficulty to perform accurate, and more importantly, reproducible UPS experiments. Over the last years, we have identified several potential pitfalls in the experimental implementation of the technique which severely deteriorate the accurateness and reproducibility of a UPS. In this paper, we make an inventory of the most important difficulties, illustrate each of them by a real experiment and present a feasible mediation, either numerical or experimental in nature. Once the experimental set-up is fine-tuned to overcome these pitfalls, it is expected that the recording of high-level UPS experiments, in combination with numerical computations, will facilitate the technique to become a fully quantitative non-destructive characterization method.     

Minimizing Temperature Bias through Reliable Temperature Determination in Gas-Solid Photothermal Catalytic Reactions

Enormous advances in photothermal catalysis have been made over the years, whereas the temperature assessment still remains controversial in the majority of photothermal catalytic systems. Herein, we methodically uncovered the phenomenon of temperature determination bias arising from prominent temperature differences in gas-solid photothermal catalytic systems, which extensively existed yet has been overlooked in most relevant cases. To avoid the interference of temperature bias, we developed a universal protocol for reliable temperature evaluation of gas-solid photothermal catalytic reactions, with emphasis on eliminating the temperature gradient and temperature fluctuation of catalyst layer via optimizing the reaction system. This work presents a functional and credible practice for temperature detection, calling attention to addressing the effects of temperature differences, and reassessing the actual temperature-based performances in gas-solid photothermal catalysis.     

固体核磁共振Multiple-CP定量技术的参数优化与应用研究

固体核磁共振Multiple-CP定量技术可实现对不同体系、 不同定量信息的检测. 然而, Multiple-CP对样品属性的宽容度较低, 其中有关样品属性的核磁共振参数包括氢的自旋晶格弛豫时间(T_1,H)、 交叉弛豫时 间(T_CH)和自旋锁定场下氢的自旋晶格弛豫时间(T_{\mathrm{1}\rho }^{\text{?}\mathrm{H}})等. 因而需要系统地掌握Multiple-CP各种实验参数与样品上述特性参数之间的关系, 从而确定Multiple-CP技术可适用的体系范围以及最优的实验参数范围. 基于此, 首先以L-丙氨酸为模型样品, 探讨在Multiple-CP实验中弛豫恢复时间(t_d)、 交叉极化接触时间(t_p)和交叉极化次数(n) 3种实验参数对分子中基团比例测量结果的影响规律. 并以L-缬氨酸、 L-丙氨酸/L-缬氨酸的混合物为模型样品, 探讨样品特性参数的差异性对Multiple-CP实验参数范围的影响. 实验结果表明, t_p受T_CH和\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}}的影响较大. 对于纯净物或均相体系, T_CH是影响t_p参数设置的关键. 依据实验数据发现, 当样品中各基团T_CH差异度小于8%时, 实验对t_p的宽容度较高; 对于混合物体系, 需同时考虑混合物中组分\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}差异度的影响. 当组分\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}差异度为32%、 各基团T_CH差异度为21%时, Multiple-CP对t_p的宽容度高, 可在较宽的参数范围内实现定量检测. 而当T_CH差异度较大时, 获取定量结果时t_p的参数范围较小, 实验条件较苛刻. Multiple-CP定量方法更适用于T_CH和\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}差异度较小的样品体系的定量研究. 通过研究样品T_CH和\text{?}{T}_{\mathrm{1}\rho }^{\text{?}\mathrm{H}\text{?}}对实验参数的影响, 总结了Multiple-CP方法所适用的样品体系特征, 为使用Multiple-CP进行定量检测提供可参考的参数设置方案.