辐射加热金X光再发射时间测量

利用星光Ⅱ三倍频激光打双盘靶，研究了辐射加热材料的Ｘ光发射时间。激光脉冲能量４０～６０Ｊ、脉冲宽度６００～７００ｐｓ。通过两台时间关联的亚千Ｘ光能谱仪分别监测双盘靶初、次级发射Ｘ光谱，给出了辐射加热次级Ｘ光再发射时间。     

吸积盘的X射线辐射对周围星际物质的离化研究

利用辐射流体力学程序对三倍频纳秒激光与靶物质相互作用进行了模拟研究，得到了可以产生黑体辐射谱分布的激光等离子体X射线辐射靶的最佳厚度；数值模拟研究了黑体谱分布的X射线辐射场对等离子体系统平均离化度分布的影响，它有助于深入理解天体物理中吸积盘对它周围星际物质的离化影响. 关键词： 辐射流体力学 激光等离子体 X射线辐射 吸积盘 离化     

Condensation film on an inclined rotating disk

The three dimensional problem of steady fluid deposition on an inclined rotating disk is solved by similarity transform. For a given spraying rate there may be one, two or no steady state solution. The inclination causes a downward draining flow and a lateral flow. Perturbation solutions compare well with exact similarity solutions when the fluid film is thin.     

蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

多排叶片内部流动以及叶片排与排气系统相互作用研究

本文采用高分辨率格式和多块多网格方法求解雷诺平均Navier-Stokes方程,数值模拟多排叶片内的三维粘性流动;使用数值激盘模拟叶片排的存在,研究叶片排与非轴对称排气部件之间的相互作用以及复杂的内部流动。文中描述了数值方法,给出了NASA透平导叶和单级透平内部流场的数值结果及其与相应实验结果的对比,也给出了多级透平内部流场的数值结果,以及透平与排气部件之间的耦合流场的结果。     

基于液晶调制器调制的实时测温系统

分析了一种基于基尔霍夫定律的钽酸锂(LiTaO3)热释电探测器作为接收元件的实时测温系统中,机械式调制盘对测量精度影响,提出了改变机械式调制盘对测量精度的影响的方法;介绍了液晶调制器的结构、对辐射调制的原理以及在使用过程中的优点。设计了利用液晶调制器替代机械调制器的钽酸锂热释电实时测温系统。结果表明,利用液晶调制器改进后的测温系统在给定的温度范围中,测量精度均有明显的改善,符合测量要求。     

Determination of colloidally-associated polycyclic aromatic hydrocarbons (PAHs) in fresh water using C18 solid phase extraction disks

A new application of reversed-phase octadecyl (C₁₈) solid phase extraction disks has been developed to separate the colloidally-associated polycyclic aromatic hydrocarbons (PAHs) from those that were truly dissolved in the samples of fresh water. A correction for the retention of small amounts of colloidal material on the C₁₈ disks was required, which would have otherwise lead to minor underestimates in the degree of partitioning between the two phases. Using the humic substance Aldrich Humic Acid (AHA) as a model colloid and the 16 PAHs on the US Enrivonmental Protection Agency priority pollutant list, the partitioning coefficients of the PAHs between the colloidal and truly dissolved phases were shown to be proportional to the hydrophobicity of the PAHs, as measured by their octanol water partition coefficients (K_ow). The values for the partition coefficients obtained (cK_doc′) were similar to those previously reported in the literature using alternative methods, confirming that the technique was producing acceptable results. The technique allows the in situ partitioning of PAHs between the truly dissolved and colloidal phases in fresh water bodies to be determined. It will provide an invaluable cross-check of the laboratory-based methods which often require substantial manipulation of the sample and potentially alter the partitioning between the phases.     

Limit Regimes of Braking of Disc-Type Composite Flywheels Made by Filament Winding

A set of invariants describing the limit regimes of braking disk-type wound composite flywheels is suggested. The limit regime is determined by using a linear failure criterion. It is shown that, for generating short-time impulses of very high power, a set of small identical flywheels is more effective than one large flywheel with an equivalent mass. Particular examples illustrating the theory considered are discussed.     

光盘阵列系统的一种性能优化方法

提出了一种用低性能驱动器组建高性能光盘阵列系统性能的优化方法。针对传统的低性能光盘驱动器(驱动器内部数据传输率及接口速率均较低),提出了一种新型的数据传输模式。采用此优化方法可以使光盘阵列系统的整体性能得到较大地提高。同时还可以提高系统整体的性价比。     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.