教学质量的时齐马尔可夫链评估法

本文研究了教学质量评估中的一种定量分析方法──时齐马尔可夫链评估法．阐明了这种方法的理论依据及其实施程序、并指出它较之其他教学质量评估法更显合理．     

氢化物发生-原子荧光光谱法测定水中汞的测量不确定度分析

对氢化物发生-原子荧光光谱法测定水中汞的分析方法的测量不确定度进行了估计。认为在分析的全过程中,标准溶液的配制、校准曲线的绘制以及试样的分析是测量不确定度的三项主要来源。基于这一认识,建立了相应的数学模型,对关系式中的各个变量作了分析并对其不确定度进行量化。最后,按统计学的计算方法给出了合成不确定度和扩展不确定度。     

Nanostructure evolution studies of bulk polymer materials with synchrotron radiation: progress in method development

The prospects of a modern analysis of nanostructure evolution during the processing of polymer materials by means of scattering from synchrotron radiation are demonstrated in examples. The beam sources have gained stability, shortages are located in beamline setups and in method development for the quantitative analysis of voluminous data sets.By using the proposed multidimensional chord distribution function (CDF) analysis method, nanostructure information from small-angle X-ray scattering (SAXS) data are extracted and visualised. The method can be automated if the beamline setup is able to deliver a full data set with simple constraints. In this case even a simultaneous data evaluation is possible (while one pattern is accumulated, the previous one is analysed). The advantages of the method are demonstrated in a study of the straining of a thermoplastic elastomer. The possibilities of an automated analysis are demonstrated in an investigation of the crystallisation behaviour of high-pressure injection-moulded polyethylene (HPIM-PE). The achievable results of nanostructure analysis of polymer materials are discussed. It is shown that the time-resolved SAXS of polymer materials studied during a transformation and analysed by the CDF method is not just a powerful tool to investigate the relationship between structure and properties of materials; the information that can be gained concerning the processes that control nanostructure evolution is equally important. In the future the enlightenment of such relationships may help to tailor polymer materials with respect to their properties and, beyond that, to improve assessments concerning their aging.     

ICP－MS用于Eu_2O_3标准物质中铝和锌的定值分析

报道了用电感耦合等离子体质谱法测定氧比铕标准物质中Ａｌ_２Ｏ_３和ＺｎＯ的方法。考察了谱干扰和基体影响，采用Ｒｈ为内标较好地补偿了基体铕的影响。方法简便、快速，定值准确、可靠。     

封闭压力酸溶-ICP-MS法分析地质样品中47个元素的评价

对封闭压力酸溶－ICP－MS法同时测定地质样品中47个元素的效果和适用范围进行了实测评价。并对溶样条件进行了优化。实验结果表明，HF－HNO3高温高压酸溶是一种有效的样品分解方法，在所测定的47个元素中，大部分元素如Li,Be,Ti,V,Mn,Co,Ni,Cu,Zn,As,Zr,Nb,Mo,Cd,In,Sn,Sb,Hf,Ta,W,Tl,Pb,Bi等在大多数标样中在三种取样量下都可以得到满意的回收率。而Sc,Cr,Ga,Y,REE,Rb,Cs,Sr,Ba,Th,U等元素在大部分样品中则随取样量减少，回收率上升，在一些样品中，当取样量降至25mg时，可以获得满意的回收率。用王水代替HNO3复溶残渣，利用氯离子的络合作用促进复溶，使许多元素的回收率有了明显的提高。     

Unraveling the mystery of efficacy in Chinese medicine formula: New approaches and technologies for research on pharmacodynamic substances

Traditional Chinese medicine (TCM) is the key to unlock treasures of Chinese civilization. TCM and its compound play a beneficial role in medical activities to cure diseases, especially in major public health events such as novel coronavirus epidemics across the globe. The chemical composition in Chinese medicine formula is complex and diverse, but their effective substances resemble “mystery boxes”. Revealing their active ingredients and their mechanisms of action has become focal point and difficulty of research for herbalists. Although the existing research methods are numerous and constantly updated iteratively, there is remain a lack of prospective reviews. Hence, this paper provides a comprehensive account of existing new approaches and technologies based on previous studies with an in vitro to in vivo perspective. In addition, the bottlenecks of studies on Chinese medicine formula effective substances are also revealed. Especially, we look ahead to new perspectives, technologies and applications for its future development. This work reviews based on new perspectives to open horizons for the future research. Consequently, herbal compounding pharmaceutical substances study should carry on the essence of TCM while pursuing innovations in the field.     

Gas chromatographic conditions for the linearity of the relationship between σT,t and tR in open tubes

The linearity of the relationship between σ_T,t² and (1 + k)² is studied with the view of using it for the evaluation of GC equipment. Based on appropriate analytical expressions it is concluded that in general this relationship is not linear and that practical procedures for column evaluation should be developed that take this non-linearity into account.     

The construction and evaluation of a high pressure manifold and vessels for a Calvet type microcalorimeter

A Setaram C-80 calorimeter has been modified in order to measure the heat flow of energetic materials at pressures up to 69 MPa. A manifold and sample cells capable of operating at high pressure were designed, constructed and evaluated. This paper will describe, in detail, the high pressure manifold construction, safety assessment and calibration. As well, the results for initial trials with ammonium nitrate (AN), and pentaerythritol tetranitrate (PETN) at various pressures and heating rates will be discussed.     

Novel metrics and methodology for the characterisation of 3D imaging systems

The modelling, benchmarking and selection process for non-contact 3D imaging systems relies on the ability to characterise their performance. Characterisation methods that require optically compliant artefacts such as matt white spheres or planes, fail to reveal the performance limitations of a 3D sensor as would be encountered when measuring a real world object with problematic surface finish. This paper reports a method of evaluating the performance of 3D imaging systems on surfaces of arbitrary isotropic surface finish, position and orientation. The method involves capturing point clouds from a set of samples in a range of surface orientations and distances from the sensor. Point clouds are processed to create a single performance chart per surface finish, which shows both if a point is likely to be recovered, and the expected point noise as a function of surface orientation and distance from the sensor. In this paper, the method is demonstrated by utilising a low cost pan-tilt table and an active stereo 3D camera. Its performance is characterised by the fraction and quality of recovered data points on aluminium isotropic surfaces ranging in roughness average (Ra) from 0.09 to 0.46 µm at angles of up to 55° relative to the sensor over a distances from 400 to 800 mm to the scanner. Results from a matt white surface similar to those used in previous characterisation methods contrast drastically with results from even the dullest aluminium sample tested, demonstrating the need to characterise sensors by their limitations, not just best case performance.     

Projective Reed–Muller type codes on rational normal scrolls

In this paper we study an instance of projective Reed–Muller type codes, i.e., codes obtained by the evaluation of homogeneous polynomials of a fixed degree in the points of a projective variety. In our case the variety is an important example of a determinantal variety, namely the projective surface known as rational normal scroll, defined over a finite field, which is the basic underlining algebraic structure of this work. We determine the dimension and a lower bound for the minimum distance of the codes, and in many cases we also find the exact value of the minimum distance. To obtain the results we use some methods from Gröbner bases theory.