极大3限制边连通二部图的充分条件

设G=(V,E)是一个连通图.称一个边集合S■E是一个k限制边割,如果G-S的每个连通分支至少有k个顶点.称G的所有k限制边割中所含边数最少的边割的基数为G的k限制边连通度,记为λ_k(G).定义ξ_k(G)=min{[X,■]:|X|=k,G[X]连通,■=V(G)\X}.称图G是极大k限制边连通的,如果λ_k(G)=ξ_k(G).本文给出了围长为g>6的极大3限制边连通二部图的充分条件.     

Lower Bounds for the Robustness of Multilevel Coherence

International Journal of Theoretical Physics - Quantum coherence, coming from quantum superposition, occupies a significant position in the field of physics. We put forward a lower bound of the...     

Optimal control of an SIQRS epidemic model with three measures on networks

Nonlinear Dynamics - At present, the main measures for disease control are vaccination, quarantine and treatment. Taking the three measures into consideration, time-varying optimal control problems...     

Virtual Field Characterization for Ratcheting Effect Under Cyclic Loading

Experimental Mechanics - Ratcheting is an important mechanical behavior of metals and alloys, which is caused by the repeated accumulations of tensile and compressive strain in circle load....     

磷酸酯类前药的合成方法与应用

磷酸酯类前药与原药相比,不仅能够提高药物靶向性、稳定性和生物利用度,减少药物毒副作用,还能掩蔽药物不适气味、提高水溶性从而改善给药途径。含羟基药物的磷酸酯化是该类药物前药设计的重要方法之一。本文根据中心磷原子的价态和化合物结构进行分类,综述了各种P(Ⅴ)四配位分子、P(Ⅲ)三配位分子和H-亚磷酸酯类化合物作为磷酸酯化试剂在磷酸酯类前药合成方法中的研究进展,并阐述了这些磷酸酯类药物的应用,最后总结了各类磷酸酯化试剂的优势与局限,并结合连续流反应技术应用案例展望了其发展趋势。     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

Multifunctional fibrous wound dressings for refractory wound healing

Refractory wounds have always been an important issue to healthcare systems, whose healing process is always delayed by multiple factors, including bacterial infections, chronic inflammation, and excessive exudates, etc. Employing multifunctional wound dressings is recognized as an effective strategy to deal with refractory wounds, which has yielded promising outcomes in recent years. Among these advanced wound dressings, fibrous dressings have gained growing attention due to their unique merits. Such wound dressings have demonstrated great potential in delivering theranostic agents, such as antibacterial agents, anti-inflammatory drugs, growth factors, and diagnostic probes, etc., for the purposes of accelerating wound healing. This paper reviews the development of multifunctional fibrous dressings and their applications in treating refractory wounds. The construction approaches of novel fibrous dressing with capabilities of antibacterial, anti-inflammation, exudate management and diagnosis were also introduced. Furthermore, the existing problems and challenges are also discussed briefly.