Thermal extrusion of cellulose using hydroxypropyl methylcellulose

Cellulose - Hydroxypropyl methylcellulose (HPMC), a cellulose derivative, is highly water soluble, viscoelastic, and thermoplastic. However, the thermoplasticity of HPMC has not yet been studied in...     

Catalytic Asymmetric Syntheses of Alkylidenecyclopropanes from Allenoates with Donor-Acceptor and Diacceptor Diazo Reagents

The first diastereo- and enantioselective cyclopropanation reactions of electron-deficient allenes with donor-acceptor and diacceptor diazo reagents are described. The desired enantioenriched alkylidenecyclopropanes (ACPs) were obtained in high yields with high diastereo- and enantioselectivities in the presence of Rh₂((S)-TCPTAD)₄ or Rh₂((R)-BTPCP)₄ catalysts (up to 95 % yield, >95 : 5 d.r. and 99 : 1 e.r.). This methodology gave a direct access to ACPs bearing multiple electron-deficient substituents and allows to further expand the availability of ACPs chemistry. Interestingly, during the examination of the scope of this reaction, the asymmetric intramolecular C−H insertion reaction into tert-butyl group was observed as a side reaction with up to 94 : 6 e.r.     

Mechanism of BPh3-Catalyzed N-Methylation of Amines with CO2 and Phenylsilane: Cooperative Activation of Hydrosilane

BPh₃ catalyzes the N-methylation of secondary amines and the C-methylenation (methylene-bridge formation between aromatic rings) of N,N-dimethylanilines or 1-methylindoles in the presence of CO₂ and PhSiH₃; these reactions proceed at 30–40 °C under solvent-free conditions. In contrast, B(C₆F₅)₃ shows little or no activity. ¹¹B NMR spectra suggested the generation of [HBPh₃]⁻. The detailed mechanism of the BPh₃-catalyzed N-methylation of N-methylaniline ( 1 ) with CO₂ and PhSiH₃ was studied by using DFT calculations. BPh₃ promotes the conversion of two substrates (N-methylaniline and CO₂) into a zwitterionic carbamate to give three-component species [Ph(Me)(H)N⁺CO₂⁻⋅⋅⋅BPh₃]. The carbamate and BPh₃ act as the nucleophile and Lewis acid, respectively, for the activation of PhSiH₃ to generate [HBPh₃]⁻, which is used to produce key CO₂-derived species, such as silyl formate and bis(silyl)acetal, essential for the N-methylation of 1 . DFT calculations also suggested other mechanisms involving water for the generation of [HBPh₃]⁻ species.     

A cost-scaling algorithm for minimum-cost node-capacitated multiflow problem

Mathematical Programming - Many practical integer programming problems involve variables with one or two-sided bounds. Dunkel and Schulz (A refined Gomory–Chvátal closure for polytopes...     

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.