Mechanism of BPh3-Catalyzed N-Methylation of Amines with CO2 and Phenylsilane: Cooperative Activation of Hydrosilane

BPh₃ catalyzes the N-methylation of secondary amines and the C-methylenation (methylene-bridge formation between aromatic rings) of N,N-dimethylanilines or 1-methylindoles in the presence of CO₂ and PhSiH₃; these reactions proceed at 30–40 °C under solvent-free conditions. In contrast, B(C₆F₅)₃ shows little or no activity. ¹¹B NMR spectra suggested the generation of [HBPh₃]⁻. The detailed mechanism of the BPh₃-catalyzed N-methylation of N-methylaniline ( 1 ) with CO₂ and PhSiH₃ was studied by using DFT calculations. BPh₃ promotes the conversion of two substrates (N-methylaniline and CO₂) into a zwitterionic carbamate to give three-component species [Ph(Me)(H)N⁺CO₂⁻⋅⋅⋅BPh₃]. The carbamate and BPh₃ act as the nucleophile and Lewis acid, respectively, for the activation of PhSiH₃ to generate [HBPh₃]⁻, which is used to produce key CO₂-derived species, such as silyl formate and bis(silyl)acetal, essential for the N-methylation of 1 . DFT calculations also suggested other mechanisms involving water for the generation of [HBPh₃]⁻ species.     

Synthesis of nonplanar bipyridyls bridged by disilane and disiloxane and their phosphorescent copper complexes

Disilane- and disiloxane-bridged bipyridyls ( DSBPy and DSOBPy ) were prepared and their optical properties were investigated in comparison with those of previously reported monosilane- and monogermane-bridged counterparts. The UV–visible absorption and photoluminescence bands of DSBPy and DSOBPy were blue-shifted as a result of elongation of the bridging units from monosilane and monogermane to disilane and disiloxane, likely due to the enhanced twisting of the bipyridyl units. Phosphorescent complexes DSBPy–Cu and DSOBPy–Cu were prepared by the interaction of DSBPy and DSOBPy with Cu₂I₂(PPh₃)₂. X-ray diffraction studies of their single-crystal structures revealed polymeric structures composed of repeat units of DSBPy or DSOBPy and [Cu^II(PPh₃)]₂. Organic light-emitting diodes with the ITO/PEDOT:PSS/ DSBPy–Cu or DSOBPy–Cu :PCTSQ/TAZ/Al structure were fabricated to examine the applications of the complexes as electroluminescent materials. The devices emitted yellow light with emission maxima at approximately 600 nm, and maximal luminance reached 120 and 190 cd m⁻² for devices based on DSBPy–Cu and DSOBPy–Cu , respectively. The performance of the DSOBPy–Cu -based device was improved by using TAZ as the dopant of the emissive layer, and luminance was increased to 390 cd m⁻².     

Biosynthesis of Indole Diterpene Lolitrems: Radical-Induced Cyclization of an Epoxyalcohol Affording a Characteristic Lolitremane Skeleton

Lolitrems are tremorgenic indole diterpenes that exhibit a unique 5/6 bicyclic system of the indole moiety. Although genetic analysis has indicated that the prenyltransferase LtmE and the cytochrome P450 LtmJ are involved in the construction of this unique structure, the detailed mechanism remains to be elucidated. Herein, we report the reconstitution of the biosynthetic pathway for lolitrems employing a recently established genome-editing technique for the expression host Aspergillus oryzae. Heterologous expression and bioconversion of the various intermediates revealed that LtmJ catalyzes multistep oxidation to furnish the lolitrem core. We also isolated the key reaction intermediate with an epoxyalcohol moiety. This observation allowed us to establish the mechanism of radical-induced cyclization, which was firmly supported by density functional theory calculations and a model experiment with a synthetic analogue.     

Synthesis of C12-Keto Saxitoxin Derivatives with Unusual Inhibitory Activity Against Voltage-Gated Sodium Channels

A novel series of C12-keto-type saxitoxin (STX) derivatives bearing an unusual nonhydrated form of the ketone at C12 has been synthesized, and their Na_V-inhibitory activity has been evaluated in a cell-based assay as well as whole-cell patch-clamp recording. Among these compounds, 11-benzylidene STX ( 3 a ) showed potent inhibitory activity against neuroblastoma Neuro 2A in both cell-based and electrophysiological analyses, with EC₅₀ and IC₅₀ values of 8.5 and 30.7 nm , respectively. Interestingly, the compound showed potent inhibitory activity against tetrodotoxin-resistant subtype of Na_V1.5, with an IC₅₀ value of 94.1 nm . Derivatives 3 a – d and 3 f showed low recovery rates from Na_V1.2 subtype (ca 45–79 %) compared to natural dcSTX ( 2 ), strongly suggesting an irreversible mode of interaction. We propose an interaction model for the C12-keto derivatives with Na_V in which the enone moiety in the STX derivatives 3 works as Michael acceptor for the carboxylate of Asp¹⁷¹⁷.     

Enhanced Operational Durability of Thermally Activated Delayed Fluorescence-Based Organic Light-Emitting Diodes with a Triazine Electron Transporter

In organic light-emitting diodes (OLEDs) based on materials that show thermally activated delayed fluorescence (TADF), the internal quantum efficiency of 100 % can be obtained without using phosphorescence-based organometallics that contain rare metals. Therefore, with TADF-based emitters, it is possible to fabricate high-performing OLEDs at a lower cost. However, compared with fluorescence- and phosphorescence-based OLEDs, an understanding of degradation mechanisms in TADF-based OLEDs is still insufficient for future commercialization. In particular, it is widely recognized that the development of electron transport materials is crucial for improving OLED characteristics, especially driving voltages and operational durability. In this study, it was demonstrated that the operational durability of TADF-based OLEDs was greatly improved by introducing a triazine-based material of 2,4,6-tris(1,1′-biphenyl-4-yl)-[1,3,5]triazine (pT2T) as a hole-blocking layer (HBL) compared with a conventional HBL material of 2,4,6-tris(biphenyl-3-yl)-[1,3,5]triazine (T2T). Several experiments were carried out to make the reasons of the improved durability clearer, and attributed the improved durability to the shift of a carrier recombination zone from the emitting layer/HBL interface and the suppressed formation of excited-state quenchers in the pT2T HBL, because of the higher electron mobility of pT2T and the better stability of its radical anion state.     

Efficient Photoredox Cycles to Control Perylenediimide Self-Assembly**

Photoreduction of perylenediimide (PDI) derivatives has been widely studied for use in photocatalysis, hydrogen evolution, photo-responsive gels, and organic semiconductors. Upon light irradiation, the radical anion (PDI⋅⁻) can readily be obtained, whereas further reduction to the dianion (PDI²⁻) is rare. Here we show that full 2-electron photoreduction can be achieved using UVC light: 1) in anaerobic conditions by ‘direct photoreduction’ of PDI aggregates, or 2) by ‘indirect photoreduction’ in aerobic conditions due to acetone ketyl radicals. The latter strategy is also efficient for other dyes, such as naphthalenediimide (NDI) and methylviologen (MV²⁺). Efficient photoreduction on the minute time-scale using simple LED light in aerobic conditions is attractive for use in dissipative light-driven systems and materials.     

Anti-Stokes Luminescence in Multi-Resonance-Type Thermally-Activated Delayed Fluorescence Molecules

Photon-upconversion in organic molecular systems is one of the promising technologies for future energy harvesting systems because these systems can generate excitons that possess higher energy than excitation energy. The photon-upconversion caused by absorbing ambient heat as additional energy is particularly interesting because it could ideally provide a light-driving cooling system. However, only a few organic molecular systems have been reported. Here, we report the anti-Stokes photoluminescence (ASPL) derived from hot-band absorption in a series of multi-resonance-type thermally-activated delayed fluorescence (MR-TADF) molecules. The MR-TADF molecules exhibited an anti-Stokes shift of approximately 0.1 eV with a high PL quantum yield in the solution state. The anti-Stokes shift corresponded well to the 1–0 vibration transition from the ground state to the excited singlet state, and we further evaluated a correlation between the activation energy for the ASPL intensity and the TADF process. Our demonstration underlines that MR-TADF molecules have become a novel class of ASPL materials for various future applications, such as light-driving cooling systems.     

Solid‐Phase Combinatorial Synthesis and Biological Evaluation of Destruxin E Analogues

The solid‐phase combinatorial synthesis of cyclodepsipeptide destruxin E has been demonstrated. The combinatorial synthesis of cyclization precursors 8 was achieved by using a split and pool method on SynPhase Lanterns. The products were successfully macrolactonized in parallel in the solution phase by using 2‐methyl‐6‐nitrobenzoic anhydride and 4‐(dimethylamino)pyridine N‐oxide to afford macrolactones 9 , and the subsequent formation of an epoxide in the side chain gave 18 member destruxin E analogues 6 . Biological evaluation of analogues 6 indicated that the N‐MeAla residue was crucial to the induction of morphological changes in osteoclast‐like multinuclear cells (OCLs). Based on structure–activity relationships, azido‐containing analogues 15 were then designed for use as a molecular probe. The synthesis and biological evaluation of analogues 15 revealed that 15 b , in which the Ile residue was replaced with a Lys(N₃) residue, induced morphological changes in OCLs at a sufficient concentration, and modification around the Ile residue would be tolerated for attachment of a chemical tag toward the target identification of destruxin E ( 1 ).     

Biological responses to silicon and nitrogen-rich PVD silicon nitride coatings

Most structural bioceramics are comprised of metallic oxides such as alumina and zirconia. They are generally considered to be completely bioinert, but a non-oxide ceramic, silicon nitride, achieves equivalent levels of mechanical reliability while being bioactive. Silicon nitride can not only stimulate cellular proliferation but it is also antipathogenic with demonstrated efficacy against Gram-positive and Gram-negative bacteria, fungi, and viruses. In this work, three physical vapor deposition coatings with different Si:N ratios (silicon-rich, stoichiometric, and nitrogen-rich) were deposited on mirror-polished silica glass substrates. The coatings were characterized by spectroscopic and microscopic techniques and tested in vitro against E. coli and KUSA-A1 mesenchymal cells. Results showed that nitrogen-enriched Si_xN_y has a strong antibacterial effect against E. coli and contributes to cellular proliferation while silicon-enriched Si_xN_y stimulates the production of bone tissue, with higher indexes for mineralization and quality. These results suggest that Si_xN_y's biological properties can be optimized for specific applications by carefully tuning its surface chemistry.     

Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.