两个基于[Fe(bpca)(CN)3]-的一维3d-4f异金属配合物的合成和晶体结构

以[(bpca)Fe(CN)3]-(bpca=二(2-吡啶羰基)酰胺阴离子)为构筑基元,设计合成了2个新颖的3d-4f异金属配合物,{[(bpca)Fe(CN)3Pr(H2O)5]Cl2}n(1)和{[(bpca)2Fe2(CN)6Pr(H2O)6]Cl·4H2O}n(2),并测定了它们的晶体结构.化合物1的晶体属正交晶系,Pnma空间群;而化合物2属三斜晶系,P1空间群.在这2个化合物中,[(bpca)Fe(CN)3]-和[Pr(H2O)x]3 (1,x=5;2,x=6)交替排列形成一维链状结构,并通过π-π堆积作用、氢键作用及分子间短距离相互作用形成三维网络结构.     

退火对ZnO薄膜晶体结构和ZnO/p-Si异质结光电性质的影响

采用脉冲激光沉积方法在p-Si(100)衬底卜牛长ZnO薄膜,分别在500℃、600℃和700℃下真空退火,采用X射线衍射仪研究了退火对ZnO薄膜品体结构的影响,并测量了ZnO的面电阻和ZnO/p-Si异质结的、I-V特性曲线.研究表明,随着退火温度的升高,ZnO的(002)衍射峰强度逐渐增大,半峰全宽不断减小,同时薄膜内应力减小,ZnO晶粒尺寸变大.表明高温退火有助于ZnO薄膜结晶质量的提高.在没有光照的条件下,异质结的漏电流随退火温度的增加而增大;用650 nm光照射样品时,600℃退火的样品表现出最明显的光电效应,而过高的退火温度会破坏ZnO/p-Si异质结的界面结构,使其光电流变小.所以,要得到性能良好的光电器件,应选取适当的退火温度.     

Effect of annealing on structural, optical and electrical properties of ZnS/porous silicon composites

ZnS films were prepared by pulsed laser deposition (PLD) on porous silicon (PS) substrates. This paper investigates the effect of annealing temperature on the structural, morphological, optical and electrical properties of ZnS/PS composites by x-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) and I--V characteristics. It is found that the ZnS films deposited on PS substrates were grown in preferred orientation along β-ZnS (111) direction, and the intensity of diffraction peak increases with increasing annealing temperature, which is attributed to the grain growth and the enhancement of crystallinity of ZnS films. The smooth and uniform surface of the as-prepared ZnS/PS composite becomes rougher through annealing treatment, which is related to grain growth at the higher annealing temperature. With the increase of annealing temperature, the intensity of self-activated luminescence of ZnS increases, while the luminescence intensity of PS decreases, and a new green emission located around 550~nm appeared in the PL spectra of ZnS/PS composites which is ascribed to the defect-center luminescence of ZnS. The I--V characteristics of ZnS/PS heterojunctions exhibited rectifying behavior, and the forward current increases with increasing annealing temperature.     

Effects of Substrate Temperature and Nitrogen Pressure on Growth of AIN Films by Pulsed Laser Deposition

Highly oriented aluminium nitride （AIN） films are grown on p-Si （100） substrates by pulsed laser deposition, and their characteristics of structure and composition are studied by x-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. The results show that the deposited films exhibit good crystalline properties with a sharp x-ray diffraction peak at 2θ= 33.15 ° corresponding to AIN h （100） crystalline orientation. The influences of substrate temperature and ambient nitrogen （N2） pressure on the crystallinity of A1N films are remarkable. At room temperature, when the ambient N2 pressure arises from 5 × 10^-6 Pa to 5 Pa, the crystallinity of the film becomes better. When the substrate temperature is 600℃, the film has the best crystallinity at 0.05 Pa. Furthermore, the effects of substrate temperature and ambient N2 pressure on the combination of A1-N bonds and surface morphology of AIN films are also studied.     

4-硝基邻苯二硫酚金属镍配合物的合成、结构和性质

合成了4-硝基邻苯二硫酚配体及相应金属镍配合物，(Bu₄N)₂[Ni(nbdt)₂] (1)和(Bu₄N)[Ni(nbdt)₂] (2)(nbdt=4-硝基邻苯二硫酚阴离子), 并通过X-射线单晶结构测定、循环伏安、ESR谱、紫外可见吸收光谱和变温磁化率实验对其结构和性质进行了表征。这两个化合物均为略有变形的平面四方型配合物。配合物2是由配合物1通过I₂氧化制备。配合物2含有一个未成对电子，磁性研究表明由于分子间的自旋耦合使它表现为反铁磁性。     

含四硫富瓦烯羧酸配体和二价金属钴离子一维链配合物的合成、结构和物理性质研究

本文以一种水溶性的冠醚环化四硫富瓦烯羧酸为配体,成功合成并表征了结构新颖的含四硫富瓦烯衍生物的二价钴一维配位聚合物[{Co2（trioTTF）2（H2O）6}·5H2O]n（1）.X射线单晶衍射结构分析表明,在配位聚合物1中Co^2＋离子之间通过羧酸桥联形成一维链状结构,相邻链的四硫富瓦烯羧酸配体之间存在较短的S…S相互作用.尽管配位聚合物1的室温电导率很小,但其电阻-温度特性曲线显示具有半导体性质.同时,磁性研究表明,低温下由羧酸桥联的Co2＋离子存在弱的铁磁相互作用.本研究为分子磁性半导体的进一步设计合成提供了思路.     

浅谈影响循环冷却水浊度的因素

简述了影响辽阳石化硝酸厂循环冷却水的因素。指出影响循环水浊度的主要原因是系统泄漏,提出泄漏带来的危害及应采取的防范措施。     

含分枝铜纳米线多孔铝膜的偏振特性

利用二次阳极氧化法制备了具有分枝结构的多孔铝(PAA)模板,并以交流电化学沉积的方法在该模板中合成了分枝状的铜纳米线。用SEM观察样品的形貌结构,用分光光度计测量了样品的透射光谱和偏振光谱。实验结果表明,含分枝状铜纳米线结构的多孔铝膜在近红外光区具有较高的透射率,且得到了14～22 dB的消光比。这种微偏振器件制备方法简单、效率高、造价低,在光电集成领域有着广泛的应用前景。     

Study of white light emission from ZnS/PS composite system

ZnS films were deposited by pulsed laser deposition(PLD)on porous silicon(PS)substrates formed by electrochemical anodization of p-type(100)silicon wafer.The photoluminescence(PL)spectra of ZnS/PS composites were measured at room temperature.Under different excitation wavelengths,the relative integrated intensities of the red light emission from PS layers and the blue-green emission from ZnS films had different values.After samples were annealed in vacuum at different temperatures(200,300,and 400℃)for 30 min respectively,a new green emission located at around 550 nm appeared in the PL spectra of all ZnS/PS samples,and all of the ZnS/PS composites had a broad PL band(450-700 nm)in the visible region,exhibiting intensively white light emission.     

Lattice Boltzmann simulation of behaviour of particles moving in blood vessels under the rolling massage

The rolling massage is one of the most important manipulations in Chinese massage, which is expected to eliminate many diseases. Here, the effect of the rolling massage on a pair of particles moving in blood vessels under rolling massage manipulation is studied by the lattice Boltzmann simulation. The simulated results show that the motion of each particle is considerably modified by the rolling massage, and it depends on the relative rolling velocity, the rolling depth, and the distance between particle position and rolling position. Both particles' translational average velocities increase almost linearly as the rolling velocity increases, and obey the same law. The increment of the average relative angular velocity for the leading particle is smaller than that of the trailing one. The result is helpful for understanding the mechanism of the massage and to further develop the rolling techniques.