排序方式: 共有39条查询结果,搜索用时 15 毫秒
1.
通过大气等离子喷涂工艺制备了氧化钇稳定氧化锆(YSZ)涂层,采用真空浸渍技术和水热合成的方法,将含有反应物离子或分子的前驱体溶液引入YSZ涂层内部固有的微裂纹和孔洞等缺陷中,并在缺陷中原位合成了直径约78~111 nm的Ag/Ag2MoO4类球形纳米颗粒,首次制备出了YSZ-Ag/Ag2MoO4复合涂层. 摩擦试验结果表明:与YSZ涂层相比,YSZ-Ag/Ag2MoO4复合涂层由于在室温和600 ℃下形成了润滑层,抑制了YSZ涂层摩擦表面的脆性断裂和磨粒磨损,从而显著降低了涂层的摩擦系数和磨损率,有效提高了涂层的摩擦学性能. 相似文献
2.
3.
固态聚合物电解质是发展柔性全固态锂离子电池的核心,但是目前室温离子电导率低限制了其应用.本研究以热聚合方法制备石墨相氮化碳(g-C_3N_4),并将其与聚氧化乙烯/高氯酸锂(PEO/LiClO_4)共混制备复合聚合物固态电解质.采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、光学显微镜(OM)、扫描电子显微镜(SEM)、差示扫描量热仪(DSC)和电化学工作站对复合聚合物电解质膜进行表征.结果表明,通过120℃退火-淬冷热处理及复合聚合物电解质内部的相互作用,可以较大程度抑制PEO的结晶,从而使该复合聚合物固态电解质膜的离子电导率在25℃时达到2.4×10~(-5)S cm~(-1),提高了3个数量级. 相似文献
4.
5.
Transformation thermodynamics as a major extension of transformation optics has recently received considerable attention. In this paper, we present two-dimensional (2D) and three-dimensional (3D) diamond-shaped transient thermal cloaks with non-singular homogeneous material parameters. The absence of singularity in the parameters results from the fact that the linear coordinate transformation is performed by expanding a line segment rather than a point into a region, while the mechanism behind the homogeneity is the homogeneous stretching and compression along orthogonal directions during the transformation. Although the derived parameters remain anisotropic, we further show that this can be circumvented by considering a layered structure composed of only four types of isotropic materials based on the effective medium theory. Numerical simulation results confirm the good performance of the proposed cloaks. 相似文献
6.
本文对比研究了关于弹性波模拟中的曲边地表形状处理的两种方法,一种是用给定的实际介质数值划定的地表形状,另一种是用样条插值逼近地表形状.本文采用有限元方法进行弹性波数值模拟,给出了基于这两种方法计算的数值例子,并对结果进行了分析比较.结果表明使用后一种方法对地表进行处理时,地表人工离散产生的干扰明显减少,优于前一种方法. 相似文献
7.
We propose an inverse method to determine the material parameters of a transparent device without any knowledge of the corresponding transformation function. The required parameters are independently obtained and expressed as functions of the introduced generator. Moreover, to remove the inhomogeneity and anisotropy of material parameters, a layered transparent device composed of only homogeneous and isotropic materials is presented based on the effective medium theory. The feasibility of using the layered device in antenna protection is also investigated. Full-wave simulation is carried out for verification. This work paves a new way toward designing metamaterial devices without specifying the underlying coordinate transformation, and has great guiding significance for the practical fabrication of transparent devices. 相似文献
8.
自2004年石墨烯被成功制备以来, 相关研究引起了广泛关注, 其中, 传感应用是一个重要方向. 目前, 有关石墨烯传感特性的研究都集中在低频, 即根据分子附着引起的电导率变化来实现检测. 然而, 由于大部分分子吸附都会使电导率发生变化, 因此该方法难以区分不同分子的特征. 论文基于Kubo公式, 结合数值仿真方法研究了单层石墨烯带的传输模式, 分析了有效模式指数与模式传输特性的关联, 证实了波导模的局域性和宽带特性. 同时, 利用一阶波导模与气体作用引起的传输强度的变化反演分子振动谱. 以SO2, CO和C7H8气体的传感为例, 基于本征分析验证了方法的有效性. 结果表明, 传输模式与分子作用能够产生耦合共振增强, 并且其变化趋势与气体分子振动谱一致; 在传输方向上, 分子与传输模式的作用范围越大, 则模式传输强度的变化越大. 该研究为实现气体分子指纹的识别和检测奠定了理论基础. 相似文献
9.
如何灵活地控制和操纵热流是目前研究的热点.本文根据变换热力学方法,导出了具有任意横截面形状热集中器的材料参数表达式,并在此基础上设计了具有圆形、椭圆形、正五边形等规则横截面形状的热集中器和具有共形、非共形任意横截面形状的热集中器.全波仿真结果表明,这些热集中器使等温线和热通量向其压缩区弯曲,靠近热源的一侧热扩散加快而相反的一侧热扩散减慢,在很小的区域内表现出对热量的集中作用,这一特点在热能工程中有潜在应用.此外,研究了圆柱形热集中器的层化实现方法.结果显示,热集中器可通过将同性材料沿角向分层交替填充来实现.这项工作对热集中器的设计及制备具有指导意义. 相似文献
10.
以“数列通项公式”的解题教学为载体,以认知结构的理论作为研究依据,从组建解题模块,提升解题能力的角度展开分析与研究,提出数列相关问题存在无递推公式与有递推公式两类情况.文章从这两类情况着手,探寻数列通项公式解题模块的实际应用情况,帮助学生建构一类解题结构,以提高解题能力. 相似文献