Design of diamond-shaped transient thermal cloaks with homogeneous isotropic materials

Transformation thermodynamics as a major extension of transformation optics has recently received considerable attention. In this paper, we present two-dimensional (2D) and three-dimensional (3D) diamond-shaped transient thermal cloaks with non-singular homogeneous material parameters. The absence of singularity in the parameters results from the fact that the linear coordinate transformation is performed by expanding a line segment rather than a point into a region, while the mechanism behind the homogeneity is the homogeneous stretching and compression along orthogonal directions during the transformation. Although the derived parameters remain anisotropic, we further show that this can be circumvented by considering a layered structure composed of only four types of isotropic materials based on the effective medium theory. Numerical simulation results confirm the good performance of the proposed cloaks.     

三维RC网络仿真异质材料的通用介质响应

提出了一种三维RC网络模型,并采用MATLAB及C语言对该模型进行编码、建模和仿真,得到了该网络的归一化复介电常数.分别计算了元件数为54,144,300,540和882的三维RC网络,结果表明,元件数为300及其以上的网络,其通用介质响应(UDR)特性趋于稳定;获得了电容分别为100nF,10nF,1nF和100pF时,540个元件RC网络的归一化复介电常数与频率关系的仿真结果;仿真了540个元件的RC网络中,电阻比例分别为4％,7％,10％,16％和33％时,归一化复介电常数与角频率ω的 关键词： 三维RC网络 异质材料 介电常数 通用介质响应     

辐射成像系统模拟软件NUCRPD的研发与应用

在辐射成像系统的设计研发中,经常需要计算系统的各项物理性能指标。为了提升产品研发的效率,同方威视联合清华大学,基于蒙特卡罗程序包Geant4,研发了国内首套具有自主知识产权的辐射成像系统模拟软件NucRPD(NUCTECH Radiography Performance Design Tools),其能够快速、精确地模拟系统的各项性能指标。该软件对常用的一些辐射成像系统进行了参数化建模,用户通过修改软件界面上的少量参数,就可以快速建立各类辐射成像系统的几何体、源项、物理模型和统计量,然后在服务器上以并行计算方式完成模拟计算,能在较短的时间内模拟出系统的性能指标,并给出直观的图形帮助用户深入理解模拟结果。NucRPD的模拟结果经过了大量的实验验证,其剂量场分布和物理指标等模拟结果和实验结果符合得很好。NucRPD已经应用于同方威视辐射成像系统产品的设计研发,在产品的物理指标优化和辐射防护优化中发挥了重要作用。     

Orbital Angular Momentum Generation Using Circular Ring Resonators in Radio Frequency

Electromagnetic field generators based on circular ring resonators,whose perimeters are integer times of equivalent wavelength,are well known to have attractive potential for producing radio vortexes carrying orbital angular momentum(OAM).We study the radiation characteristics of the generators based on radiation vector and antenna array theory.The behaviors of radiation patterns,field intensity and phase distribution are investigated in detail,and show classical features of OAM beams.The evolution of the generators performance versus the OAM state is also analyzed.The proposed generators can be realized by all kinds of microwave transmission lines,verified by two different prototypes.The discussions and conclusions drawn in this study are useful and meaningful for the radio OAM generator design.     

Inverse design-based metamaterial transparent device and its multilayer realization

We propose an inverse method to determine the material parameters of a transparent device without any knowledge of the corresponding transformation function. The required parameters are independently obtained and expressed as functions of the introduced generator. Moreover, to remove the inhomogeneity and anisotropy of material parameters, a layered transparent device composed of only homogeneous and isotropic materials is presented based on the effective medium theory. The feasibility of using the layered device in antenna protection is also investigated. Full-wave simulation is carried out for verification. This work paves a new way toward designing metamaterial devices without specifying the underlying coordinate transformation, and has great guiding significance for the practical fabrication of transparent devices.     

单层石墨烯带传输模式及其对气体分子振动谱的传感特性研究

自2004年石墨烯被成功制备以来, 相关研究引起了广泛关注, 其中, 传感应用是一个重要方向. 目前, 有关石墨烯传感特性的研究都集中在低频, 即根据分子附着引起的电导率变化来实现检测. 然而, 由于大部分分子吸附都会使电导率发生变化, 因此该方法难以区分不同分子的特征. 论文基于Kubo公式, 结合数值仿真方法研究了单层石墨烯带的传输模式, 分析了有效模式指数与模式传输特性的关联, 证实了波导模的局域性和宽带特性. 同时, 利用一阶波导模与气体作用引起的传输强度的变化反演分子振动谱. 以SO₂, CO和C₇H₈气体的传感为例, 基于本征分析验证了方法的有效性. 结果表明, 传输模式与分子作用能够产生耦合共振增强, 并且其变化趋势与气体分子振动谱一致; 在传输方向上, 分子与传输模式的作用范围越大, 则模式传输强度的变化越大. 该研究为实现气体分子指纹的识别和检测奠定了理论基础.     

基于变换热力学的任意形状热集中器研究与设计

如何灵活地控制和操纵热流是目前研究的热点.本文根据变换热力学方法,导出了具有任意横截面形状热集中器的材料参数表达式,并在此基础上设计了具有圆形、椭圆形、正五边形等规则横截面形状的热集中器和具有共形、非共形任意横截面形状的热集中器.全波仿真结果表明,这些热集中器使等温线和热通量向其压缩区弯曲,靠近热源的一侧热扩散加快而相反的一侧热扩散减慢,在很小的区域内表现出对热量的集中作用,这一特点在热能工程中有潜在应用.此外,研究了圆柱形热集中器的层化实现方法.结果显示,热集中器可通过将同性材料沿角向分层交替填充来实现.这项工作对热集中器的设计及制备具有指导意义.     

X波段宽频带多模轨道角动量天线仿真与设计

轨道角动量作为一种新的、安全和高效利用频谱的传输复用方式引起了科学界的关注。基于均匀圆阵列,设计了一种工作在X波段的宽带多模轨道角动量天线。该天线由旋转排列的三角形均匀圆阵列组成,其特点是正负模式数的产生除了与馈电方式有关外,还与均匀圆阵中阵元的旋转方式相关。仿真结果表明,在X频段该天线-10 dB带宽范围为9.33~10.37 GHz,带宽达到1.04 GHz,总的效率为52%;在相同阵元数量的情况下,该天线产生的模式数多于矩形贴片天线。该天线具有馈电网络简单、带宽宽和模式数大等优点。     

Design of an optical device with three functions based on coordinate transformation

Based on two-step coordinate transformation along the radial direction, an optical device with three functions is proposed. The proposed device functions as a transparent device, a vision-enabling internal cloak, and a movement-allowing external cloak. The general expressions of material parameters for the optical device are determined, and each function of the device is confirmed using full-wave simulation. The effect of material loss on device performance is also investigated. Future applications for the proposed device include antenna protection and military stealth.     

微波谐振腔微扰技术检测造纸法再造烟叶水分

研究了基于微波谐振腔微扰技术检测造纸法再造烟叶水分的方法.用最小二乘法探讨了不同微波测量参数与造纸法再造烟叶水分含量的校准模型,并将检测结果与标准烘箱法进行了比较.研究表明:该方法的测量误差小于0.4%,检测的响应速度仅为 0.1 ms.