沉淀聚合制备粒径可控的温度响应型蛋白纳米胶囊

以牛血清蛋白(BSA)为模型蛋白,N-异丙基丙烯酰胺(NIPAM)为单体,N,N'-亚甲基双丙烯酰胺(BIS)为交联剂,采用原位沉淀聚合法制备了单分散的温度响应型蛋白纳米胶囊(nBSA).通过调整单体与蛋白的比例制备了粒径大小不同的含有单个蛋白分子的BSA纳米胶囊.采用基质辅助激光解吸电离飞行时间质谱仪(MALDI-TOF MS)、透射电镜(TEM)和动态光散射仪(DLS)等对BSA蛋白的修饰度,nBSA的形貌和结构,以及温度响应性能进行了表征,并用HeLa细胞对nBSA的体外安全性进行了初步评价.结果表明,在一定范围内,随着单体和蛋白比例的升高,蛋白纳米胶囊的粒径也逐渐增大,且在7.4～17 nm之间可控,而nBSA的响应温度则逐渐减小在33～41℃之间可控;制备的nBSA单分散性较好;nBSA具有温度响应性能,当环境温度高于其响应温度时,nBSA的粒径可显著增大16～33倍,且这种变化随温度呈现可逆性,并通过对nBSA细胞毒性的初步考察,评价将其用于生物领域的潜力.     

The structural and magnetic properties of barium ferrite powders prepared by the solben gel method

In this paper, M-type hexagonal barium ferrite powders are synthesized using the sol-gel method. A dried precursor heated in air is analyzed in the temperature range from 50 to 1200 ℃ using thermo-gravimetric analysis and differential scanning calorimetry. The effects of the additives and the cacinating temperature on the magnetic properties are investigated, and the results show that single-phase barium ferrite powders can be formed. After heat-treating at 950 ℃ for 4h with 3 wt% additive, the coercivity and saturation magnetization are found to be 440 Oe and 57.9 emu/g, respectively.     

Development and application of ferrite materials for low temperature co-fired ceramic technology

Development and application of ferrite materials for low temperature co-fired ceramic(LTCC)technology are discussed,specifically addressing several typical ferrite materials such as M-type barium ferrite,NiCuZn ferrite,YIG ferrite,and lithium ferrite.In order to permit co-firing with a silver internal electrode in LTCC process,the sintering temperature of ferrite materials should be less than 950°C.These ferrite materials are research focuses and are applied in many ways in electronics.     

Enhancement of magnetic and dielectric properties of low temperature sintered NiCuZn ferrite by Bi2O3-CuO additives

With a series of 1.0 wt%Bi$_{2}$O$_{3}$-$x$ wt% CuO ($x =0.0$, 0.2, 0.4, 0.6, and 0.8) serving as sintering additives, Ni$_{0.23}$Cu$_{0.32}$Zn$_{0.45}$Fe$_{2}$O$_{4}$ ferrites are successfully synthesized at a low temperature (900 $^\circ$C) by using the solid state reaction method. The effects of the additives on the phase formation, magnetic and dielectric properties as well as the structural and gyromagnetic properties are investigated. The x-ray diffraction (XRD) results indicate that the added Bi$_{2}$O$_{3}$-CuO can lower the synthesis temperature significantly without the appearing of the second phase. The scanning electron microscope (SEM) images confirm that Bi$_{2}$O$_{3}$ is an important factor that determines the sintering behaviors, while CuO affects the grain size and densification. With CuO content $x=0.4$ or 0.6, the sample shows high saturation magnetization, low coercivity, high real part of magnetic permeability, dielectric permittivity, and small ferromagnetic resonance linewidth ($\Delta H$). The NiCuZn ferrites are a promising new generation of high-performance microwave devices, such as phase shifters and isolators.     

The structural and magnetic powders prepared by properties of barium ferrite the sol-gel method

In this paper,M-type hexagonal barium ferrite powders are synthesized using the sol-gel method.A dried precursor heated in air is analyzed in the temperature range from 50 to 1200 C using thermo-gravimetric analysis and differential scanning calorimetry.The effects of the additives and the cacinating temperature on the magnetic properties are investigated,and the results show that single-phase barium ferrite powders can be formed.After heat-treating at 950 C for 4h with 3 wt% additive,the coercivity and saturation magnetization are found to be 440 Oe and 57.9 emu/g,respectively.     

Dual-band and polarization-insensitive terahertz absorber based on fractal Koch curves

We report the design, fabrication, and characterization of a dual-band and polarization-insensitive metamaterial ab-sorber （MA）, which consists of periodically arranged fractal Koch curves acting as the top resonator array and a metallic ground plane separated by a dielectric spacer. Compared with conventional MAs, a more compact size and multi-frequency operation are achieved by using fractal geometry as the unit cell of the MA. Both the effective medium theory and the multi- reflection interference theory are employed to investigate the underlying physical mechanism of the proposed terahertz MA, and results indicate that the latter theory is not suitable for explaining the absorption mechanism in our investigated struc-ture. Two absorption peaks are observed at 0.226 THz and 0.622 THz with absorptivities of 91.3% and 95.6% respectively and good agreements between the full-wave simulation and experimental results are achieved.     

Frequency dependence of the magnetoelectric effect in a magnetostrictive-piezoelectric heterostructure

The frequency dependence of the magnetoelectric effect in a magnetostrictive-piezoelectric heterostructure is theoretically studied by solving combined magnetic, elastic, and electric equations with boundary conditions. Both the mechanical coupling coefficient and the losses of the magnetostrictive and piezoelectric phases are taken into account. The numerical result indicates that the magnetoelectric coefficient and the resonance frequency are determined by the mechanical coupling coefficient, losses, and geometric parameters. Moreover, at the electromechanical resonance frequency, the module of the magnetoelectric coefficient is mostly contributed by the imaginary part. The relationship between the real and the imaginary parts of the magnetoelectric coefficient fit well to the Cole-Cole circle. The magnetostrictive-piezoelectric heterostructure has a great potential application as miniature and no-secondary coil solid-state transformers.     

稀土元素La掺杂BaFe12O19微结构和磁性能的研究术

用固相法制备了镧掺杂M型钡铁氧体（Ba1--xLaxFel2O19,x=0．0-0．6）,针对不同取代量与不同温度的烧结,研究取代量和温度对钡铁氧体微结构和磁性能的影响．在烧结温度为1100-1175℃,当X=0．0-0．6时,样品主要有单一的六角M型钡铁氧体相构成．SEM表明,La离子的加入不会影响钡铁氧体微观形貌．在磁性能方面,随着La离子的增加,钡铁氧体的饱和磁化强度先增加后减小,矫顽力逐渐增加．在同一取代量下,钡铁氧体的饱和磁化强度随烧结温度升高呈现上升趋势,矫顽力随着烧结温度的升高而降低．饱和磁化强度在x=0．2,烧结温度1175℃时达到最大值62．8emu／g,矫顽力在x=0．6,烧结温度1125℃时达到最大值3911．5Oe．