Sb complexes and Zn interstitials in Sb-implanted ZnO epitaxial films

In the present work, post-annealing is adopted to investigate the formation and the correlation of Sb complexes and Zn interstitials in Sb-ion implanted ZnO films, by using Raman scattering technique and electrical characterizations. The damage of Zn sublattice, produced by ion bombardment process is discerned from the unrecovered E2 (L) peak in annealed high Sb+ dose implanted samples. It is suggested that the Zn sublattice may be strongly affected by the introduction of Sb dopant because of the formation of SbZn-2VZn complex acceptor. The appearance of a new peak at 510 cm 1 in the annealed high dose Sb+ implanted samples is speculated to result from (Zn interstitials-O interstitials) Zni-Oi complex, which is in a good accordance with the electrical measurement. The p-type ZnO is difficult to obtain from the Sb+ implantation, however, which can be realized by in-situ Sb doping with proper growth conditions instead.     

木卫停泊轨道间低耗能小推力转移轨道设计方法研究

对木卫停泊轨道间的低耗能小推力转移轨道设计方法进行了研究,提出基于"类halo轨道截面"法的低耗能转移轨道参数化方法和基于配点法的多体Lambert问题求解算法,并利用全局优化算法得出了燃耗最少的初步优化结果;利用多体同伦法和固定近心点高度的多圈转移控制律得到了各段小推力转移轨道的有效设计结果.所提方法同样适用于其他天体间的转移轨道设计,为多体环境下低耗能小推力转移轨道提出了新的设计思路和方法.     

铈锆比对低贵金属Pt＋Rh/Ce0.3＋xZr0.6－xY0.1O1.95＋Al2O3三效催化剂性能的影响

用共沉淀法制得一系列铈锆比不同的Ce_0.3＋xZr_0.6－xY_0.1O_1.95储氧材料, 并用于制备了一系列低贵金属Pt＋Rh/Ce_0.3＋xZr_0.6－xY_0.1O_1.95＋Al₂O₃三效催化剂. 用比表面、程序升温还原以及X射线衍射对该系列催化剂进行表征, 结果发现, 催化剂的活性与催化剂中贵金属的还原性能密切相关, 低铈储氧材料比高铈储氧材料更有利于促进贵金属还原, 因而含低铈储氧材料催化剂的活性明显优于含高铈储氧材料催化剂的活性, Pt＋Rh/Ce_0.35Zr_0.55Y_0.1O_1.95＋Al₂O₃的活性最佳, 对HC, CO和NO的起燃温度最低分别为: 235, 175, 200 ℃. 样品经1000 ℃水热老化之后, 贵金属Pt被烧结而发生迁移, 使得催化剂的活性及还原性能变差, 含低铈材料的催化剂的抗老化性能优于含高铈材料的催化剂, 其中Pt＋Rh/Ce_0.35Zr_0.55Y_0.1O_1.95＋Al₂O₃的抗老化性能最好.     

基于观测器的模糊时滞系统指数稳定的一种设计方法

研究了一类模糊时滞系统的指数稳定问题.首先利用T-S模型对非线性不确定性时滞系统进行建模,在此基础上设计了基于观测器的模糊状态反馈控制器,通过巧妙选取Lyapunov函数给出了模糊闭环时滞系统的条件及稳定裕度且模糊反馈增益和模糊观测器增益可通过求解线性矩阵不等式获得.     

一类非线性二元算子方程的迭代求解及其应用

运用锥与半序理论与混合单调算子理论,讨论半序Banach空间一类非线性二元算子方程解的存在唯一性,并给出迭代序列收敛于解的误差估计.作为应用,讨论了不具有单调性的算子方程的可解性,所得结果是某些已有结果的本质改进和推广.     

Temperature dependence of Cu2O orientations in the oxidation of Cu（111）/ZnO（0001） by oxygen plasma

The role of temperature on the oxidation dynamics of Cu2O on ZnO (0001) was investigated during the oxidation of Cu (111)/ZnO (0001) by using oxygen plasma as the oxidant. A transition from single crystalline Cu2O (111) orientation to micro-zone phase separation with multiple orientations was revealed when the oxidation temperature increased above 300°C. The experimental results clearly show the effect of the oxidation temperature with the assistance of oxygen plasma on changing the morphology of Cu (111) film and enhancing the lateral nucleation and migration abilities of cuprous oxides. A vertical top-down oxidation mode and a lateral migration model were proposed to explain the different nucleation and growth dynamics of the temperature-dependent oxidation process in the oxidation of Cu (111)/ZnO (0001).     

Temperature dependence of Cu20 orientations in the oxidation of Cu （111）/ZnO （0001） by oxygen plasma

The role of temperature on the oxidation dynamics of Cu20 on ZnO （0001） was investigated during the oxidation of Cu （111）/ZnO （0001） by using oxygen plasma as the oxidant. A transition from single crystalline Cu20 （111） orientation to micro-zone phase separation with multiple orientations was revealed when the oxidation temperature increased above 300 ~ C. The experimental results clearly show the effect of the oxidation temperature with the assistance of oxygen plasma on changing the morphology of Cu （111） film and enhancing the lateral nucleation and migration abilities of cuprous oxides. A vertical top-down oxidation mode and a lateral migration model were proposed to explain the different nucleation and growth dynamics of the temperature-dependent oxidation process in the oxidation of Cu （lll）/ZnO （0001）.     

铈锆比对低贵金属Pt＋Rh/Ce0.3＋xZr0.6－xY0.1O1.95＋Al2O3三效催化剂性能的影响

用共沉淀法制得一系列铈锆比不同的Ce_0.3＋xZr_0.6－xY_0.1O_1.95储氧材料, 并用于制备了一系列低贵金属Pt＋Rh/Ce_0.3＋xZr_0.6－xY_0.1O_1.95＋Al₂O₃三效催化剂. 用比表面、程序升温还原以及X射线衍射对该系列催化剂进行表征, 结果发现, 催化剂的活性与催化剂中贵金属的还原性能密切相关, 低铈储氧材料比高铈储氧材料更有利于促进贵金属还原, 因而含低铈储氧材料催化剂的活性明显优于含高铈储氧材料催化剂的活性, Pt＋Rh/Ce_0.35Zr_0.55Y_0.1O_1.95＋Al₂O₃的活性最佳, 对HC, CO和NO的起燃温度最低分别为: 235, 175, 200 ℃. 样品经1000 ℃水热老化之后, 贵金属Pt被烧结而发生迁移, 使得催化剂的活性及还原性能变差, 含低铈材料的催化剂的抗老化性能优于含高铈材料的催化剂, 其中Pt＋Rh/Ce_0.35Zr_0.55Y_0.1O_1.95＋Al₂O₃的抗老化性能最好.