FeS2多晶薄膜电子结构的实验研究

用磁控溅射方法制各纯Fe薄膜,并硫化合成FeS2.采用同步辐射X射线近边吸收谱与X射线光电子能谱研究了薄膜的电子结构.结果表明,合成的FeS2薄膜,在费米能级附近,有较强的Fe 3d态密度存在,同时,在价带谱中2-10eV处有强度较大的S 3p态密度存在;Fe的3d轨道在八面体配位场作用下分别为t2g和eg轨道,实验中由Fe的吸收谱计算得到两分裂能级之差为2.1eV;实验测得FeS2价带结构中导带宽度约为2.4eV,导带上方仍存在第二能隙,其宽度约为2.8eV.     

Fabrication and Characterization of Ni Thin Films Using Direct-Current Magnetron Sputtering

Ni films are deposited by using ultra high vacuum dc magnetron sputtering onto silicon substrates at room temperature, and the high-quality and high-density films are prepared. The parameters, such as thickness, density and surface roughness, are obtained by using small-angle x-ray diffraction (XRD) analyses with the Marquardt gradient-expansion algorithm. The deposition rate is calculated and the Ni single layer can be fabricated precisely. Based on the fitting results, we can find that the surface roughness of the Ni films is about 0.7nm, the densities of Ni films are around 97% and the deposition rate is 0.26nm/s. The roughness of the surface is also characterized by using an atomic force microscope (AFM). The changing trend of the surface roughness in the simulation of XRD is in good agreement with the AFM measurement.     

High-energy x-ray diffraction study on phase transition asymmetry of plastic crystal neopentylglycol

As a prototype material of colossal barocaloric effects, neopentylglycol is investigated by combining high-precision differential scanning calorimetric measurement and high-energy x-ray diffraction measurement. The diffraction data at constant temperatures indicate a first-order phase transition with thermal hysteresis as well as the phase transition asymmetry, specifically, the phase transition is completed faster at cooling than at heating. The analysis of resulting pair distribution function confirms the intermolecular disorder in the high-temperature phase. The phase transition asymmetry is quantitatively characterized by time-resolved x-ray diffraction, which is in agreement with the thermal measurement. Also, such an asymmetry is observed to be suppressed at high pressures.     

钼酸根阴离子印迹陶瓷膜的制备与吸附性能

以三氧化二铝陶瓷膜为载体,以钼酸根阴离子为模板离子,1-乙烯基咪唑为功能单体,1,6-二溴己烷为交联剂,采用表面印迹和接枝聚合方法制备了能选择性吸附Mo(Ⅵ)的新型印迹陶瓷膜(IIP-PVI/CM).采用红外光谱、X射线光电子能谱、热重分析及扫描电子显微镜等方法对陶瓷膜进行结构表征.研究了pH值对吸附性能的影响,当pH值范围为2~4时,IIP-PVI/CM具有良好吸附能力;动力学和热力学结果表明,IIP-PVI/CM对Mo(Ⅵ)的吸附符合准二级动力学模型和Langmuir吸附模型;当pH=4.0和温度为30℃时,IIP-PVI/CM对Mo(Ⅵ)具有良好选择性,Mo(Ⅵ)对W(Ⅵ)的选择性系数高达7.48;动态吸附结果表明,IIP-PVI/CM对W(Ⅵ)和Mo(Ⅵ)的吸附饱和时间分别为24和47 min,饱和吸附量分别为0.163和0.672 mmol/100 g,动态吸附时IIP-PVI/CM亦具有良好选择性;经9次吸附与解吸后,IIP-PVI/CM对Mo(Ⅵ)吸附容量仍可达到初始值的92%,再生和循环使用性能良好.     

一类非线性四阶波动方程初边值问题解的有限时间爆破

研究四阶带有阻尼项的非线性波动方程的解的初边值问题,利用位势井方法,证明了当初值满足一定条件时解发生爆破.将有关该系统爆破性质的研究结果一般化,通过证明得到了该系统较好的性质.     

人参栽培研究进展

人参作为经济作物在中国有着数千年的种植历史。人参具有多种药理活性,在食品、医药和化妆品等领域有着广泛的应用。然而,目前人参的实际产量并不能满足市场需求。提升人参生产效率仍是当前阶段人参种植研究工作的首要目标。近些年,在人参选地、种子处理、播种、搭棚、培育和采收等生产环节中,涌现了许多新模式、新技术、新方法和新仪器。本文从栽培模式和技术角度综述人参栽培的研究现状,希望为进一步提升人参生产效率提供参考。     

固液界面的力?电?化学耦合及在电催化体系中的应用

目前许多新型高效金属催化剂在设计制备中都考虑到表面力学因素, 例如层状结构、核壳结构等, 其表面高活性原子受到不同程度的应变作用. 应变可直接改变金属的能带带隙, 对催化剂表面的电化学反应产生显著影响, 是一种有效提升材料催化活性的新思路和制备高性能催化剂的新途径, 因此受到了科研工作者的广泛关注. 传统的材料应变工程手段存在着活性物质层的应变值难以精确定量, 并缺少实时调控以及制备工艺繁琐等难题, 导致应变与电催化活性相关性规律识别方面的理论和实验研究进展缓慢. 相比于传统的材料手段, 交变载荷产生的应变具有幅值和频率的可变性以及连续的调控性, 在实验中可以完全排除噪声、缺陷、空位、基底效应等其他外部或材料本征的影响因素. 该综述从经典固液界面热力学表述出发, 简要介绍了电催化体系中的力?电?化学耦合效应, 归纳总结目前电催化体系中应变施加的实验手段和分析方法, 并基于目前相关研究着重讨论在交变载荷作用下应变对金属表面电催化反应的作用机理, 最后从力学角度展望了表面力学在电催化体系中的研究重点及发展趋势.      

X射线Kirkpatrick-Baez显微镜用超反射镜的研制

 介绍了一种可应用于X射线Kirkpatrick-Baez（KB）显微镜的光学元件—X射线超反射镜。选用的W和B₄C作为镀膜材料，膜对数为20，采用单纯型调优的方法实现了X射线超反射镜设计，用磁控溅射的方法在Si基片上完成了W/B₄C X射线超反射镜的制备。采用高分辨率X射线衍射仪（8 keV）测量了X射线超反射镜的反射特性。制备的X射线超反射镜在掠入射角分别为1.052°和1.143°处，反射角度带宽为0.3°，反射率达到20%，可满足KB型显微镜的要求。     

Design, Fabrication and Measurement of Ni/Ti Multilayer Used for Neutron Monochromator

Ni/Ti multilayers, which can be used for neutron monochromators, are designed, fabricated and measured. Firstly, their reflectivities are simulated based on the Nevot-Croce model. Reflectivities of two Ni/Ti multilayer mirrors with periods d = 10.3 nm （M1） and d = 7.8 nm （M2） are calculated. In the calculation, the reflectivity of the Ni/Ti multilayer is taken as a function of the gazing angle with different roughness factors δ =1.0 nm and = 1.5 nm. Secondly, these two multilayers are fabricated by the direct current magnetron sputtering technology. Thirdly their structures are characterized by small-angle x-ray diffraction. The roughness factors are fitted to be 0.68 nm and 1.16nm for M1 and M2, respectively. Finally their reflective performances are measured on the V14 neutron beam line at the Berlin Neutron Scattering Centre （BENSC）, Germany. The experimental data show that the grazing angle of the reflected neutron intensity peak increases, but the reflected neutron intensity decreases, with the decreasing periods of the multilayers.     

Diode End-Pumped Passively Q-Switched Nd^3＋：GdVO4 Self-Raman Laser at 1176 nm

A compact diode-end-pumped passively Q-switched Nd^3＋ ：GdVO4/C^r4＋ ：YAG self-Raman laser at 1176 nm is demonstrated. When the To = 80% Cr^4＋：YAG saturable absorber is inserted into the cavity, the maximum Rtaman laser output reaches 175 mW with 3.8 W incident pump power. The optical conversion from incident to the Raman laser is 4.6% and the slope efficiency is 6.5%. The pulse energy, duration, and repetition frequency of the first stokes laser are 4.5μJ, 1.8 ns, and 38.5 kHz, respectively. There is strong blue emission （about 350- 400nm） can be observed in the Nd^3＋ ：GdVO4 crystal when the process of stimulated Raman scattering occurs, which is induced by the upconversion of the Nd^3＋ ions.