Formation of Supramolecular Nanostructures through in Situ Self-Assembly and Post-Assembly Modification of a Biocatalytically Constructed Dipeptide Hydrazide**

Aqueous self-assembly of short peptides has attracted growing attention for the construction of supramolecular materials for various bioapplications. Herein, we describe how the thermolysin-assisted biocatalytic construction of a dipeptide hydrazide from an N-protected amino acid and an amino acid hydrazide leads to the formation of thermally stable supramolecular hydrogels. In addition, we demonstrate the post-assembly modification of the supramolecular architectures constructed in situ tethering hydrazide groups as a chemical handle by means of fluorescence imaging.     

Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Three-dimensional visualization of columnar vortices in rotating Rayleigh–Bénard convection

Journal of Visualization -  To enrich the three-dimensional experimental details of vortex structures in rotating Rayleigh–Bénard convection, we established a technique...     

Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys

The effect of Re addition on the microstructure and hardening behaviour of the dual two-phase Ni₃Al (L1₂) and Ni₃V (D0₂₂) intermetallic alloy was investigated by scanning electron microscopy, transmission electron microscopy and Vickers hardness test. The two-phase eutectoid microstructure accompanying the Re-rich precipitates were observed in the channel region of the alloys in which Re substituted for Ni but not in those in which Re substituted for Al and V. The concomitant addition of Nb (or Ta) with Re more stabilized the two-phase eutectoid microstructure and consequently more induced the fine precipitates in the channel region. The annealing at temperatures below the eutectoid temperature was necessary to induce the fine precipitates in the channel region and thereby result in the precipitation hardening. The fine precipitation in the channel region and related hardening was attributed to the alloying feature so that Re is soluble in the A1 (fcc) phase at high temperatures and becomes less soluble in the two intermetallic phases decomposed from the A1 phase at low temperatures.     

Reactions in Water Involving the “On-Water” Mechanism

Ever-evolving catalyst advances in synthetic protocols using water as a reaction medium have enriched the understanding of sustainable organic chemistry. Because conventional classification and definitions were ambivalent, it is proposed here that catalytic reactions using water be collectively called to be “in water”, with further classification into seven types. When accelerated in water as heterogeneous mixtures, the reactions can be regarded as following an “on-water” mechanism. The original term “on water” coined by Sharpless is incongruous with catalytic reactions, whereas on-water used in this review covers all the interfaces involving water where chemical reactions are accelerated. As a result of the unconcluded dispute on the antiquated catalyst-free “on water” model, the modified model defines three water layers: water molecules that are oriented to extrude protons toward the oil phase in the inner layer, those enwrapped by a secondary layer, and finally the bulk water layer. In light of the latitudinous outlook on the role of water at the interface, selected examples of reactions, in particular those reported over the past decade, that follow an “on-water” mechanism are reviewed herein.     

Coronenetetraimide‐Centered Cruciform Pentamers Containing Multiporphyrin Units: Synthesis and Sequential Photoinduced Energy‐ and Electron‐Transfer Dynamics

A series of coronenetetraimide (CorTIm)‐centered cruciform pentamers containing multiporphyrin units, in which four porphyrin units are covalently linked to a CorTIm core through benzyl linkages, were designed and synthesized to investigate their structural, spectroscopic, and electrochemical properties as well as photoinduced electron‐ and energy‐transfer dynamics. These systems afforded the first synthetic case of coroneneimide derivatives covalently linked with dye molecules. The steady‐state absorption and electrochemical results indicate that a CorTIm and four porphyrin units were successfully characterized by the corresponding reference monomers. In contrast, the steady‐state fluorescence measurements demonstrated that strong fluorescence quenching relative to the corresponding monomer units was observed in these pentamers. Nanosecond laser flash photolysis measurements revealed the occurrence of intermolecular electron transfer from triplet excited state of zinc porphyrins to CorTIm. Femtosecond laser‐induced transient absorption measurements for excitation of the CorTIm unit clearly demonstrate the sequential photoinduced energy and electron transfer between CorTIm and porphyrins, that is, occurrence of the initial energy transfer from CorTIm (energy donor) to porphyrins (energy acceptor) and subsequent electron transfer from porphyrins (electron donor) to CorTIm (electron acceptor) in these pentamers, whereas only the electron‐transfer process from porphyrins to CorTIm was observed when we mainly excite porphyrin units. Finally, construction of high‐order supramolecular patterning of these pentamers was performed by utilizing self‐assembly and physical dewetting during the evaporation of solvent.     

Synthesis,Properties, and Redox Behavior of 1,1,4,4‐Tetracyano‐2‐ferrocenyl‐1,3‐butadienes Connected by Aryl,Biaryl, and Teraryl Spacers

Aryl‐substituted 1,1,4,4‐tetracyano‐1,3‐butadienes (FcTCBDs) and bis(1,1,4,4‐tetracyanobutadiene)s (bis‐FcTCBDs), possessing a ferrocenyl group on each terminal, were prepared by the reaction of a variety of alkynes with tetracyanoethylene (TCNE) in a [2+2] cycloaddition reaction, followed by retro‐electrocyclization of the initially formed [2+2] cycloadducts (i.e., cyclobutene derivatives). The characteristic intramolecular charge transfer (ICT) between the donor (ferrocene) and acceptor (TCBD) moieties were investigated by using UV/Vis spectroscopy. The redox behaviors of FcTCBDs and bis‐FcTCBDs were examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), which revealed their properties of multi‐electron transfer depending on the number of ferrocene and TCBD moieties. Moreover, significant color changes were observed by visible spectroscopy under the electrochemical reduction conditions.     

A Novel Reactivity of Phosphanylalumane (>P−Al<): Reversible Addition of a Saturated Interelement Bond to Olefins

The reversible addition of olefins to a phosphanylalumane, P−Al single-bond species, was investigated. The P−Al bond added to ethylene and relatively small terminal alkenes (propylene and hex-1-ene) at room temperature to give the corresponding alkene adducts. Heating the terminal alkene adducts released the corresponding alkenes and regenerated the P−Al bond, but no release of ethylene was observed even under vacuum conditions. The reactivity of ethylene adduct as a new saturated C₂ vicinal P/Al-based FLP was also investigated. The ethylene adduct was found to undergo complexation with nitriles to give the corresponding nitrile adducts to the Al center, which retained the ethylene tether as in the case of the corresponding P/B-based FLP. However, the reactivity of ethylene toward CO₂ and benzaldehyde differed from that of the P/B system giving the corresponding adducts.     

Synthesis and Photocatalytic Property of Hectorite/(Pt,TiO2) and H4Nb6O17/(Pt,TiO2) Nanocomposites

Abstract

TiO₂ and Pt have been intercalated in hectorite and H₄Nb₆O₁₇. The height of TiO₂ and Pt pillars was less than 0.8 nm and the band gap energy of TiO₂ pillars was ca. 3.3 eV. Both hectorite/TiO₂ and H₄Nb₆O₁₇(Pt, TiO₂) were capable of hydrogen evolution following irradiation from a high pressure mercury are (λ > 290 nm) in the presence of methanol as a sacrificial hole acceptor and the hydrogen evolution was enhanced by co-incorporation of Pt, although hectorite and hectorite/Pt did not show photocatalytic activity. Incorporation of Pt or Pt and TiO₂ in the interlayer of H₄Nb₆O₁₇ has resulted in enhanced photo evolution of hydrogen, however, TiO₂ alone in the interlayer of H₄Nb₆O₁₇ showed adverse photocatalytic activity.     

Controllable Electronic Structures and Photoinduced Processes of Bay‐Linked Perylenediimide Dimers and a Ferrocene‐Linked Triad

A series of perylene‐3,4,9,10‐bis(dicarboximide) (PDI) dimers linked through the bay regions was systematically synthesized to examine the electronic structures and photophysical properties in dependence on the distance and orientation between the two PDI units. The spectroscopic and electrochemical measurements suggested that the coupling value of a directly linked PDI dimer (PDI)₂ is much larger than those of para‐ and meta‐phenylene‐bridged PDI dimers p‐(PDI)₂ and m‐(PDI)₂. The width of Davydov splitting was quantitatively evaluated to compare the coupling values between the two PDI units in these dimers by absorption spectroscopy in frozen 2‐methyl‐THF. Excimer formation of PDI dimers induced the strong fluorescence quenching and large red‐shifts. Femtosecond transient absorption revealed a broad absorption derived from an excimer in the range from about 600 nm to the near‐IR region. The rate constants of formation and decay of the excimer are strongly dependent on the coupling values. Time‐resolved measurements on ferrocene‐linked p‐(PDI)₂ revealed a competition between the photoinduced processes of electron transfer and excimer formation in PhCN, which is in sharp contrast with the sole electron‐transfer process in toluene.