An Electron-Accepting aza-BODIPY-Based Donor–Acceptor–Donor Architecture for Bright NIR Emission

A bright near-infrared (NIR) fluorescent molecule was developed based on the donor–acceptor–donor (D–A–D) approach using an aza-BODIPY analog called pyrrolopyrrole aza-BODIPY (PPAB) as an electron-accepting chromophore. Directly introducing electron-donating triphenylamine (TPA) to develop a D–A–D structure caused redshifts of absorption and emission of PPAB into the NIR region with an enhanced fluorescence brightness of up to 5.2×10⁴ m ⁻¹ cm⁻¹, whereas inserting a phenylene linker between the TPA donor and the PPAB acceptor induced solvatochromic behavior in emission. Transient absorption spectra and theoretical calculations revealed the presence of a highly emissive hybridized locally excited and charge-transfer state in the former case and the contribution of the dark charge-separated state to the excited state in the latter case. The bright D–A–D PPAB as a novel emitter resulted in a NIR electroluminescence with a high external quantum efficiency of 3.7 % and a low amplified spontaneous emission threshold of ca. 80 μJ cm⁻², indicating the high potential for NIR optoelectronic applications.     

Synthesis and Characterization of Far‐Red/NIR‐Fluorescent BODIPY Dyes,Solid‐State Fluorescence,and Application as Fluorescent Tags Attached to Carbon Nano‐onions

A series of π‐extended distyryl‐substituted boron dipyrromethene (BODIPY) derivatives with intense far‐red/near‐infrared (NIR) fluorescence was synthesized and characterized, with a view to enhance the dye’s performance for fluorescence labeling. An enhanced brightness was achieved by the introduction of two methyl substituents in the meso positions on the phenyl group of the BODIPY molecule; these substituents resulted in increased structural rigidity. Solid‐state fluorescence was observed for one of the distyryl‐substituted BODIPY derivatives. The introduction of a terminal bromo substituent allows for the subsequent immobilization of the BODIPY fluorophore on the surface of carbon nano‐onions (CNOs), which leads to potential imaging agents for biological and biomedical applications. The far‐red/NIR‐fluorescent CNO nanoparticles were characterized by absorption, fluorescence, and Raman spectroscopies, as well as by thermogravimetric analysis, dynamic light scattering, high‐resolution transmission electron microscopy, and confocal microscopy.     

A General Strategy for the Construction of NIR‐emitting Si‐rhodamines and Their Application for Mitochondrial Temperature Visualization

Si‐rhodamine (SiR) is an ideal fluorophore because it possesses bright emission in the NIR region and can be implemented flexibly in living cells. Currently, several promising approaches for synthesizing SiR are being developed. However, challenges remain in the construction of SiR containing functional groups for bioimaging application. Herein, we introduce a general and simple approach by a condensation reaction of diarylsilylether and arylaldehyde in o‐dichlorobenzene to synthesize a series of SiRs bearing various functional substituents. These SiRs have moderate to high quantum efficiency, tolerance to photobleaching, and high water solubility as well as NIR emitting, and their NIR fluorescence properties can be controlled through the photoinduced electron transfer (PET) mechanism. Fluorescence OFF‐ON switching effect is observed for SiR 9 in the presence of acid, which is rationalized by DFT/TDDFT calculations. Moreover, reversible stimuli response toward temperature is achieved. Since positive charge enables mitochondrial targeting ability and chloromethyl unit can covalently immobilize the dyes onto the mitochondrial via click reaction between the benzyl choride and protein sulfhydryls, SiR 8 is identified as a valuable fluorescent marker to visualize the morphology and monitor the temperature change of mitochondria with high photostability.     

Benzo[c,d]indole‐Containing Aza‐BODIPY Dyes: Asymmetrization‐Induced Solid‐State Emission and Aggregation‐Induced Emission Enhancement as New Properties of a Well‐Known Chromophore

A series of symmetric and asymmetric benzo[c,d]indole‐containing aza boron dipyrromethene (aza‐BODIPY) compounds was synthesized by a titanium tetrachloride‐mediated Schiff‐base formation reaction of commercially available benzo[c,d]indole‐2(1H)‐one and heteroaromatic amines. These aza‐BODIPY analogues show different electronic structures from those of regular aza‐BODIPYs, with hypsochromic shifts of the main absorption compared to their BODIPY counterparts. In addition to the intense fluorescence in solution, asymmetric compounds exhibited solid‐state fluorescence due to significant contribution of the vibronic bands to both absorption and fluorescence as well as reduced fluorescence quenching in the aggregates. Finally, aggregation‐induced emission enhancement, which is rare in BODIPY chromophores, was achieved by introducing a nonconjugated moiety into the core structure.     

Synthesis and characterization of optical and redox properties of bithiophene-functionalized diketopyrrolopyrrole chromophores

A series of six new 2,2'-bithiophene-functionalized diketopyrrolopyrrole (DPP) dyes 7a-f bearing different electron-donating and electron-withdrawing substituents at the terminal thiophene units was synthesized by palladium-catalyzed cross-coupling reactions. The to date unknown diiodinated DPP 2 and the corresponding boronic ester derivative 3 could be prepared in high yields, and these are shown to be versatile building blocks for the synthesis of DPP-based molecular materials by Negishi, Stille, and Suzuki coupling. The influence of the peripheral substituents on the optical and electrochemical properties of the present series of DPP dyes 7a-f were investigated by UV/vis and steady-state fluorescence spectroscopy and cyclic voltammetry, revealing an appreciable effect on the electronic nature of these dyes. The diamino-substituted DPP derivative 7e exhibits a strong absorption band reaching in the near-infrared (NIR) region, which is a highly desirable feature for application in organic photovoltaics.     

Thieno–Pyrrole‐Fused BODIPY Intermediate as a Platform to Multifunctional NIR Agents

We report the synthesis, photophysical and electrochemical properties, and in vivo fluorescence imaging of a series of new thieno–pyrrole‐fused near‐infrared (NIR) BODIPY agents by using a versatile intermediate as a building block. The versatile thieno–pyrrole‐fused BODIPY intermediate was rationally designed to bear bromo‐substituents and absorb in the mid‐red region (635 nm) to act as an organic electrophile for the development of NIR multifunctional agents. The use of subsequent palladium‐catalyzed and nucleophilic substitution reactions afforded highly conjugated NIR BODIPYs. The novel BODIPYs exhibit long‐wavelength absorptions in the NIR region (650–840 nm). The agents produce sharp fluorescence bands, and most of them display respectable quantum yields of fluorescence (0.05–0.87) useful for biomedical imaging, as demonstrated by in vivo imaging with SBDPiR740 . Interestingly, a number of agents in the series that are non‐halogenated were reactive to O₂ at the triplet photo‐excited state coupled with a favorable redox potential and decent fluorescence, and hence could be potential candidates for use as photosensitizers in fluorescence‐guided photodynamic therapy. Furthermore, the synthetic approach allows further functionalization of the highly conjugated NIR BODIPYs to tune the excited states (PET, ICT) and to conjugate targeting moieties for enhanced biological applications.     

Integration of Cyanine,Merocyanine and Styryl Dye Motifs with Synthetic Bacteriochlorins

Understanding the effects of substituents on spectral properties is essential for the rational design of tailored bacteriochlorins for light‐harvesting and other applications. Toward this goal, three new bacteriochlorins containing previously unexplored conjugating substituents have been prepared and characterized. The conjugating substituents include two positively charged species, 2‐(N‐ethyl 2‐quinolinium)vinyl‐ (B‐1) and 2‐(N‐ethyl 4‐pyridinium)vinyl‐ (B‐2), and a neutral group, acroleinyl‐ (B‐3); the charged species resemble cyanine (or styryl) dye motifs whereas the neutral unit resembles a merocyanine dye motif. The three bacteriochlorins are examined by static and time‐resolved absorption and emission spectroscopy and density functional theoretical calculations. B‐1 and B‐2 have Q_y absorption bathochromically shifted well into the NIR region (822 and 852 nm), farther than B‐3 (793 nm) and other 3,13‐disubstituted bacteriochlorins studied previously. B‐1 and B‐2 have broad Q_y absorption and fluorescence features with large peak separation (Stokes shift), low fluorescence yields, and shortened S₁ (Q_y) excited‐state lifetimes (~700 ps and ~100 ps). More typical spectra and S₁ lifetime (~2.3 ns) are found for B‐3. The combined photophysical and molecular‐orbital characteristics suggest the altered spectra and enhanced nonradiative S₁ decay of B‐1 and B‐2 derive from excited‐state configurations in which electron density is shifted between the macrocycle and the substituents.     

Near‐Infrared‐III‐Absorbing and ‐Emitting Dyes: Energy‐Gap Engineering of Expanded Porphyrinoids via Metallation

The synthesis of organometallic complexes of modified 26π‐conjugated hexaphyrins with absorption and emission capabilities in the third near‐infrared region (NIR‐III) is described. Symmetry alteration of the frontier molecular orbitals (MOs) of bis‐Pd^II and bis‐Pt^II complexes of hexaphyrin via N‐confusion modification led to substantial metal d_π–p_π interactions. This MO mixing, in turn, resulted in a significantly narrower HOMO–LUMO energy gap. A remarkable long‐wavelength shift of the lowest S₀→S₁ absorption beyond 1700 nm was achieved with the bis‐Pt^II complex, t ‐Pt₂‐3 . The emergence of photoacoustic (PA) signals maximized at 1700 nm makes t ‐Pt₂‐3 potentially useful as a NIR‐III PA contrast agent. The rigid bis‐Pd^II complexes, t ‐Pd₂‐3 and c ‐Pd₂‐3 , are rare examples of NIR emitters beyond 1500 nm. The current study provides new insight into the design of stable, expanded porphyrinic dyes possessing NIR‐III‐emissive and photoacoustic‐response capabilities.     

Rational Design of a Near‐infrared Fluorescence Probe for Ca2+ Based on Phosphorus‐substituted Rhodamines Utilizing Photoinduced Electron Transfer

Fluorescence imaging in the near‐infrared (NIR) region (650–900 nm) is useful for bioimaging because background autofluorescence is low and tissue penetration is high in this range. In addition, NIR fluorescence is useful as a complementary color window to green and red for multicolor imaging. Here, we compared the photoinduced electron transfer (PeT)‐mediated fluorescence quenching of silicon‐ and phosphorus‐substituted rhodamines (SiRs and PRs) in order to guide the development of improved far‐red to NIR fluorescent dyes. The results of density functional theory calculations and photophysical evaluation of a series of newly synthesized PRs confirmed that the fluorescence of PRs was more susceptible than that of SiRs to quenching via PeT. Based on this, we designed and synthesized a NIR fluorescence probe for Ca²⁺, CaPR‐1 , and its membrane‐permeable acetoxymethyl derivative, CaPR‐1 AM , which is distributed to the cytosol, in marked contrast to our previously reported Ca²⁺ far‐red to NIR fluorescence probe based on the SiR scaffold, CaSiR‐1 AM , which is mainly localized in lysosomes as well as cytosol in living cells. CaPR‐1 showed longer‐wavelength absorption and emission (up to 712 nm) than CaSiR‐1 . The new probe was able to image Ca²⁺ at dendrites and spines in brain slices, and should be a useful tool in neuroscience research.     

New 2,6‐Distyryl‐Substituted BODIPY Isomers: Synthesis,Photophysical Properties,and Theoretical Calculations

A 2,6‐distyryl‐substituted boradiazaindacene (BODIPY) dye and a new series of 2,6‐p‐dimethylaminostyrene isomers containing both α‐ and β‐position styryl substituents were synthesized by reacting styrene and p‐dimethylaminostyrene with an electron‐rich diiodo‐BODIPY. The dyes were characterized by X‐ray crystallography and NMR spectroscopy and their photophysical properties were investigated and analyzed by carrying out a series of theoretical calculations. The absorption spectra contain markedly redshifted absorbance bands due to conjugation between the styryl moieties and the main BODIPY fluorophore. Very low fluorescence quantum yields and significant Stokes shifts are observed for 2,6‐distyryl‐substituted BODIPYs, relative to analogous 3,5‐distyryl‐ and 1,7‐distyryl‐substituted BODIPYs. Although the fluorescence of the compound with β‐position styryl substituents on both pyrrole moieties and one with both β‐ and α‐position substituents was completely quenched, the compound with only α‐position substituents exhibits weak emission in polar solvents, but moderately intense emission with a quantum yield of 0.49 in hexane. Protonation studies have demonstrated that these 2,6‐p‐dimethylaminostyrene isomers can be used as sensors for changes in pH. Theoretical calculations provide strong evidence that styryl rotation and the formation of non‐emissive charge‐separated S₁ states play a pivotal role in shaping the fluorescence properties of these dyes. Molecular orbital theory is used as a conceptual framework to describe the electronic structures of the BODIPY core and an analysis of the angular nodal patterns provides a reasonable explanation for why the introduction of substituents at different positions on the BODIPY core has markedly differing effects.     

Preparation and Characterization of Uniform Near IR Polystyrene Nanoparticles

Biomaterials for in vivo fluorescence imaging are required to be biocompatible, nontoxic, photostable and highly fluorescent. Fluorescence must be in the near infrared (NIR) region of the electromagnetic spectrum to avoid absorption and autofluorescence of endogenous tissues. NIR fluorescent polystyrene nanoparticles may be considered ideal biomaterials for in vivo imaging applications. These NIR nanoparticles were prepared by a swelling process of polystyrene template nanoparticles with a hydrophobic NIR dye dissolved in a water‐miscible swelling solvent, a method developed for preparation of nonbiodegradable nanoparticles, for NIR fluorescent bioimaging applications. This method overcomes common problems that occur with dye entrapment during nanoparticle formation such as loss of fluorescence and size polydispersity. Fluorescence intensity of the nanoparticles was found to be size dependent, and was optimized for differently sized nanoparticles. The resulting NIR nanoparticles were also found to be more fluorescent and highly photostable compared to the free dye in solution, showing their potential as biomaterials for in vivo fluorescence imaging.     

Thiophene-functionalized isoindigo dyes bearing electron donor substituents with absorptions approaching the near infrared region

A series of six new, highly soluble N,N'-dialkylated isoindigo derivatives bearing different electron donating thiophene units at the 6,6'-positions were synthesized by Stille cross-coupling reaction. The optical and electrochemical properties of these dyes were studied by UV-vis spectroscopy and cyclic voltammetry, revealing a good tunability of their electronic properties by peripheral substituents with amino groups leading to strong absorption reaching the NIR region. The DFT calculations of the frontier molecular orbitals of these dyes corroborate the observed substituent effect on absorption and redox properties.     

Chiral Selectivity in the Binding of [4]Helicene Derivatives to Double‐Stranded DNA

The interaction of a series of chiral cationic [4]helicene derivatives, which differ by their substituents, with double‐stranded DNA has been investigated by using a combination of spectroscopic techniques, including time‐resolved fluorescence, fluorescence anisotropy, and linear dichroism. Addition of DNA to helicene solutions results to a hypochromic shift of the visible absorption bands, an increase of fluorescence quantum yield and lifetime, a slowing down of fluorescence anisotropy decay, and a linear dichroism in flow‐oriented DNA, which unambiguously points to the binding of these dyes to DNA. Both helicene monomers and dimeric aggregates, which form at higher concentration, bind to DNA, the former most probably upon intercalation and the latter upon groove binding. The binding constant depends substantially on the dye substituents and is, in all cases, larger with the M than the P enantiomer, by factors ranging from 1.2 to 2.3, depending on the dye.     

Hexaarylbutadiene: A Versatile Scaffold with Tunable Redox Properties towards Organic Near‐Infrared Electrochromic Material

When the 1,1,4,4‐tetraanilinobutadiene skeleton is attached with two halogenated aryl units at the 2,3‐positions, they undergo facile two‐electron oxidation to give stable dicationic dyes which exhibit a near‐infrared (NIR) absorption whereas the neutral dienes show only pale color. Therefore, a distinct electrochromic response with an absorption change in the NIR region is achieved, which is attracting considerable recent attention from the viewpoint of bioimaging. Herein, we demonstrate that the redox potentials of the 1,1,4,4‐tetraanilinobutadiene can be precisely controlled by the donating properties of the amino group on the aniline unit as well as the number of halogen atoms on the aryl units at 2,3‐positions on the butadiene. In contrast, the NIR absorption bands mainly depend on the number of halogen atoms irrespective to the donating properties of aniline unit. Thus, the hexaarylbutadiene skeleton is proven to be a versatile scaffold to develop less‐explored organic NIR electrochromic materials, whose redox and spectroscopic properties can be finely tuned by modifying/attaching the proper substituents.     

Bright,Fluorescent Dyes Based on Imidazo[1,2‐a]pyridines that are Capable of Two‐Photon Absorption

A library of imidazo[1,2‐a]pyridines was synthesized by using the Gevorgyan method and their linear and non‐linear optical properties were studied. Derivatives that contained both electron‐donating and electron‐withdrawing groups at the 2 position were comprehensively investigated. Their emission quantum yield ranged between 0.2–0.7 and it was shown to depend on the substitution pattern, most notably that on the phenyl ring. Electron‐donating substituents improved the luminescence performance of these compounds, whereas electron‐withdrawing substituents led to a more erratic behavior. Substitution on the six‐membered ring had less effect on the fluorescence properties. Extension of the delocalization increased the luminescence quantum yield. A new quadrupolar system was designed that contained two imidazo[1,2‐a]pyridine units on its periphery and a 1,4‐dicyanobenzene unit at its center. This system exhibited a large Stokes‐shifted luminescence that was affected by the polarity and rigidity of the solvent, which was ascribed to emission from an excited state with strong charge‐transfer character. This quadrupolar feature also led to an acceptable two‐photon absorption response in the NIR region.     

Synthesis and Spectroscopic Properties of Fused‐Ring‐Expanded Aza‐Boradiazaindacenes

A series of fused‐ring‐expanded aza‐boradiazaindacene (aza‐BODIPY) dyes have been synthesized by reacting arylmagnesium bromides with phthalonitriles or naphthalenedicarbonitriles. An analysis of the structure–property relationships has been carried out based on X‐ray crystallography, optical spectroscopy, and theoretical calculations. Benzo and 1,2‐naphtho‐fused 3,5‐diaryl aza‐BODIPY dyes display markedly red shifted absorption and emission bands in the near‐IR region (>700 nm) due to changes in the energies of the frontier MOs relative to those of 1,3,5,7‐tetraaryl aza‐BODIPYs. Only one 1,2‐naphtho‐fused aza‐BODIPY of the three possible isomers is formed due to steric effects, and 2,3‐naphtho‐fused compounds could not be characterized because the final BF₂ complexes are unstable in solution. The incorporation of a  N(CH₃)₂ group at the para‐positions of a benzo‐fused 3,5‐diaryl aza‐BODIPY quenches the fluorescence in polar solvents and results in a ratiometric pH response, which could be used in future practical applications as an NIR “turn‐on” fluorescence sensor.     

Synthesis and Molecular Properties of Acceptor‐Substituted Squaraine Dyes

A broad series of more than 20 acceptor‐substituted squaraines was synthesized that feature different acceptor functionalities at the central squaraine four‐membered ring. The influence of these acceptor units on the reactivity of semisquaraine precursors and stability of the respective squaraines were explored. Thereby the dicyanovinyl group was found to be the most versatile acceptor group that enabled various modifications at the donor moiety of the squaraine scaffold, leading to an extended series of dicyanovinyl‐functionalized squaraines. The variation of donor units afforded a set of NIR fluorophores that cover a wavelength region from the visible at about 650 nm far into the NIR up to 920 nm with fluorescence quantum yields between 0.93 and 0.11 and outstanding optical brightness. This excellent optical property is related to a rigid molecular scaffold that is fixed in an all‐cis configuration by the additional dicyanovinyl acceptor unit. The change of the molecular symmetry from C_2h to C_2v upon functionalization of the squaraine core with dicyanovinyl acceptor group has been confirmed in solution by electro‐optical absorption (EOA) spectroscopy, revealing permanent ground‐state dipole moments μ_g in the range between 4.3 and 6.4 D. These dipole moments direct an antiparallel packing of the molecules in the solid state according to single‐crystal X‐ray analyses achieved for four dicyanovinyl‐functionalized squaraines. The structural properties, the EOA results, as well as the band shapes of the optical spectra indicate that these polymethine dyes are cyanine‐type chromophores. It is worth noting that the orientation of the dipole moment vectors is orthogonal to the orientation of the transition dipole moment vectors, which is an uncommon but characteristic feature of this rather novel class of polymethine dyes. With regard to applications of these dyes in organic solar cells, their redox properties were also studied by cyclic voltammetry.     

Organic Spherical Nucleic Acids for the Transport of a NIR‐II‐Emitting Dye Across the Blood–Brain Barrier

DNA nanotechnology plays an increasingly important role in the biomedical field; however, its application in the design of organic nanomaterials is underexplored. Herein, we report the use of DNA nanotechnology to transport a NIR‐II‐emitting nanofluorophore across the blood–brain barrier (BBB), facilitating non‐invasive imaging of brain tumors. Specifically, the DNA block copolymer, PS‐b‐DNA, is synthesized through a solid‐phase click reaction. We demonstrate that its self‐assembled structure shows exceptional cluster effects, among which BBB‐crossing is the most notable. Therefore, PS‐b‐DNA is utilized as an amphiphilic matrix to fabricate a NIR‐II nanofluorephore, which is applied in in vivo bioimaging. Accordingly, the NIR‐II fluorescence signal of the DNA‐based nanofluorophore localized at a glioblastoma is 3.8‐fold higher than the NIR‐II fluorescence signal of the PEG‐based counterpart. The notably increased imaging resolution will significantly benefit the further diagnosis and therapy of brain tumors.     

Anthracene carboxyimides and their dimers

Soluble anthracenedicarboxyimides have been prepared and undergo a photodimerisation of the anthracene skeleton, which is important for their application as antitumour agents, such as azonafides. Reaction under strongly alkaline conditions causes C-C coupling to form soluble dimeric fluorescent dyes with bathochromic absorption and fluorescence in the NIR region. These dyes are of special interest because of their absorption at longer wavelengths.     

Synthesis and Photophysics of BF2‐Rigidified Partially Closed Chain Bromotetrapyrroles: Near Infrared Emitters and Photosensitizers

We report the synthesis, crystallographic, optical, and triplet and singlet oxygen generation properties of a series of BF₂‐rigidified partially closed chain bromotetrapyrroles as near infrared emitters and photosensitizers. These novel dyes were efficiently synthesized from a nucleophilic substitution reaction between pyrroles and the 3,5‐bromo‐substituents on the tetra‐ and hexabromoBODIPYs and absorb in the near‐infrared region (681–754 nm) with high molar extinction coefficients. Their fluorescent emission (708–818 nm) and singlet oxygen generation properties are significantly affected by alkyl substitutions on the two uncoordinated pyrrole units of these dyes and the polarity of solvents. Among them, dyes 4 ca and 4 da show good singlet oxygen generation efficiency and good NIR fluorescence emission (fluorescence quantum yields of 0.14–0.43 in different solvents studied).