Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Seeded Polymerization of an Amide-Functionalized Diketopyrrolopyrrole Dye in Aqueous Media

The self-assembly of an amide-functionalized dithienyldiketopyrrolopyrrole (DPP) dye in aqueous media was achieved through seed-initiated supramolecular polymerization. Temperature- and time-dependent studies showed that the spontaneous polymerization of the DPP derivative was temporally delayed upon cooling the monomer solution in a methanol/water mixture. Theoretical calculations revealed that an amide-functionalized DPP derivative adopts an energetically favorable folded conformation in the presence of water molecules due to hydration. This conformational change is most likely responsible for the trapping of monomers in the initial stage of the cooperative supramolecular polymerization in aqueous media. However, the monomeric species can selectively interact with externally added fragmented aggregates as seeds through concerted π-stacking and hydrogen-bonding interactions. Consequently, the time course of the supramolecular polymerization and the morphology of the aggregated state can be controlled, and one-dimensional fibers that exhibit a J-aggregate-like bathochromically shifted absorption band can be obtained.     

Catalytic Enantioselective Reaction of α‐Phenylthioacetonitriles with Imines Using Chiral Bis(imidazoline)–Palladium Catalysts

The catalytic enantioselective reaction of α‐phenylthioacetonitriles with imines has been developed. The reaction of various imines proceeds in good yields and diastereo‐ and enantioselectivities in the presence of chiral bis(imidazoline)–palladium catalysts. The obtained products can be converted into β‐aminonitrile or β‐aminoamide compounds without loss of enantiopurity.     

Synthesis,Properties, and Redox Behavior of 1,1,4,4‐Tetracyano‐2‐ferrocenyl‐1,3‐butadienes Connected by Aryl,Biaryl, and Teraryl Spacers

Aryl‐substituted 1,1,4,4‐tetracyano‐1,3‐butadienes (FcTCBDs) and bis(1,1,4,4‐tetracyanobutadiene)s (bis‐FcTCBDs), possessing a ferrocenyl group on each terminal, were prepared by the reaction of a variety of alkynes with tetracyanoethylene (TCNE) in a [2+2] cycloaddition reaction, followed by retro‐electrocyclization of the initially formed [2+2] cycloadducts (i.e., cyclobutene derivatives). The characteristic intramolecular charge transfer (ICT) between the donor (ferrocene) and acceptor (TCBD) moieties were investigated by using UV/Vis spectroscopy. The redox behaviors of FcTCBDs and bis‐FcTCBDs were examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), which revealed their properties of multi‐electron transfer depending on the number of ferrocene and TCBD moieties. Moreover, significant color changes were observed by visible spectroscopy under the electrochemical reduction conditions.     

Molecular Design of Polyoxometalate-Based Compounds for Environmentally-Friendly Functional Group Transformations: From Molecular Catalysts to Heterogeneous Catalysts

This review article summarizes our recent researches for molecular design of polyoxometalates (POMs) and their related compounds for environmentally-friendly functional group transformations. The divacant POM [γ-SiW₁₀O₃₄(H₂O)₂]⁴⁻ exhibits high catalytic performance for mono-oxygenation-type reactions including epoxidation of olefins and allylic alcohols, sulfoxidation, and hydroxylation of organosilanes with H₂O₂. We have successfully synthesized several POM-based molecular catalysts (metal-substituted POMs) with controlled active sites by the introduction of metal species into the divacant POM as a “structural motif”. These molecular catalysts can efficiently activate H₂O₂ (vanadium-substituted POM for epoxidation) and alkynes (copper-substituted POM for click reaction and oxidative homocoupling of alkynes). The aluminum-substituted POM exhibits Lewis acidic catalysis for diastereoselective cyclization of (+)-citronellal to (−)-isopulegol. In addition, we have developed POM-based “molecular heterogeneous catalysts” by the “solidification” and “immobilization” of catalytically active POMs.     

Dehydration‐fragmentation mechanism of cathinones and their metabolites in ESI‐CID

Various cathinone‐derived designer drugs (CATs) have recently appeared on the drug market. This study examined the mechanism for the generation of dehydrated ions for CATs during electrospray ionization collision‐induced dissociation (ESI‐CID). The generation mechanism of dehydrated ions is dependent on the amine classification in the cathinone skeleton, which is used in the identification of CATs. The two hydrogen atoms eliminated during the dehydration of cathinone (primary amine) and methcathinone (secondary amine) were determined, and the reaction mechanism was elucidated through the deuterium labeling experiments. The hydrogen atom bonded to the amine nitrogen was eliminated with the proton added during ESI, in both of the tested compounds. This provided evidence that CATs with tertiary amine structures (such as dimethylcathinone and α‐pyrrolidinophenones [α‐PPs]) do not undergo dehydration. However, it was shown that the two major tertiary amine metabolites (1‐OH and 2″‐oxo) of CATs generate dehydrated ions in ESI‐CID. The dehydration mechanisms of the metabolites of α‐pyrrolidinobutiophenone (α‐PBP) belongs to α‐PPs were also investigated. Stable‐isotope labeling showed the dehydration of the 1‐OH metabolite following a simple mechanism where the hydroxy group was eliminated together with the proton added during ESI. In contrast, the dehydration mechanism of the 2″‐oxo metabolite involved hydrogen atoms in three or more locations along with the carbonyl group oxygen, indicating that dehydration occurred via multiple mechanisms likely including the rearrangement reaction of hydrogen atoms. These findings presented herein indicate that the dehydrated ions in ESI‐CID can be used for the structural identification of CATs.     

Synthesis of α‐Dawson‐Type Silicotungstate [α‐Si2W18O62]8− and Protonation and Deprotonation Inside the Aperture through Intramolecular Hydrogen Bonds

The design of structurally well‐defined anionic molecular metal–oxygen clusters, polyoxometalates (POMs), leads to inorganic receptors with unique and tunable properties. Herein, an α‐Dawson‐type silicotungstate, TBA₈[α‐Si₂W₁₈O₆₂] ? 3 H₂O ( II ) that possesses a ?8 charge was successfully synthesized by dimerization of a trivacant lacunary α‐Keggin‐type silicotungstate TBA₄H₆[α‐SiW₉O₃₄] ? 2 H₂O ( I ) in an organic solvent. POM II could be reversibly protonated (in the presence of acid) and deprotonated (in the presence of base) inside the aperture by means of intramolecular hydrogen bonds with retention of the POM structure. In contrast, the aperture of phosphorus‐centered POM TBA₆[α‐P₂W₁₈O₆₂]?H₂O ( III ) was not protonated inside the aperture. The density functional theory (DFT) calculations revealed that the basicities and charges of internal μ₃‐oxygen atoms were increased by changing the central heteroatoms from P⁵⁺ to Si⁴⁺, thereby supporting the protonation of II . Additionally, II showed much higher catalytic performance for the Knoevenagel condensation of ethyl cyanoacetate with benzaldehyde than I and III .     

Improved Photobleaching for (1,10-phenanthroline)tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionato]europium(III) Particle Embedded in Sol-Gel Derived Glass Film

In this research, we investigated improved photobleaching characteristics of (1,10-phenanthroline)tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionato]europium(III) by forming nano-particles embedded into a sol-gel derived silica glass film by a conventional sol-gel process. The relative photoluminescence intensities after the UV irradiation for 90 min were 88, 76, and 67% for nano-particles in the sol-gel derived glass film, powders in the sol-gel derived glass film, and raw powders, respectively. This result indicates that the phtobleaching of this Eu-complex can improved by forming nano-partcile structures by a reprecipitation method and embedding in the sol-gel derived silica glass.