Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

General one-loop formulas for $$H\rightarrow f\bar{f}\gamma $$ H → f f ¯ γ and its applications

The European Physical Journal C - Considering supergravity theory is a natural step in the development of gravity models. This paper follows the “algebraic“ path and constructs possible...     

Multi-targeted molecular docking,drug-likeness and ADMET studies of derivatives of few quinoline- and acridine-based FDA-approved drugs for anti-breast cancer activity

Structural Chemistry - Quinoline- and acridine-based drugs are widely used as anti-breast cancer agents. These drugs act through various mechanisms of action; for example, neratinib acts on...     

Strong π-π stacking interactions led to the mis-assignment of dimer emissions to the monomers of 1-acetylpyrene

Both experimental and computational studies showed owing to strong π-π stacking interactions, 1-acetylpyrene mainly exists in dimers and molecular aggregates even at low concentrations, which led to the mis-assignment of its monomer emission peaks.     

Fabrication of Pre-tilted Vertical Alignment Layers for High-Speed Liquid Crystal Display Using Bi-functional Photoreactive Monomers

Abstract

To enable recent 3D and moving picture applications, liquid crystal displays (LCD) must exhibit fast response and wide viewing angle characteristics. Pre-tilted vertical alignment layers for high-speed LCD were fabricated using bi-functional photoreactive monomers. The monomers can be confined to the polyimide layer and photo-polymerized by UV exposure under voltage. Response characteristics of photo-controlled alignment films according to the structure were investigated. Vertical alignment properties were evaluated using a polarizing optical microscope, and electro-optical characteristics were compared through the voltage-transmittance curve and response time measurement. Faster response speed could be obtained by using photoreactive monomers having a long alkyl chain.     

Collective sustained oscillations in excitable small-world networks: the moderate fundamental loop or the minimum Winfree loop?

Nonlinear Dynamics - The problem of self-sustained oscillations in excitable complex networks is the central issue under investigation, among which the exploration of the key factors in determining...     

Adaptive vehicle posture and height synchronization control of active air suspension systems with multiple uncertainties

This paper addresses the tasks of height and posture motion control for an electronically controlled active air suspension (AAS) system. A mathematical model of a vehicle body with AAS system is established to describe the dynamic characteristics and then formulated into a multi-input multi-output nonlinear system by considering parametric uncertainties and unmodelled dynamics. Based on this mathematical model, a synchronization control strategy is proposed to adjust the heights of adjacent AASs simultaneously, driving the pitch and roll angles closely to an arbitrarily neighborhood of zero, achieving global uniform ultimate boundedness. The proposed controller is robust to parametric uncertainties and external disturbances. A projection operator is utilized to limit the estimated parameters to their corresponding prescribed bounds in finite time. A co-simulation is conducted by combining a virtual vehicle plant with ASS system in AMEsim with the proposed synchronization controller in MATLAB/Simulink. Simulation results demonstrate that the proposed synchronization controller is effective and robust.     

Solidifying framework nucleic acids

正Living organisms have developed their unique strategies during the natural evolution for building hard tissues with minerals, including silica, calcium carbonate, calcium phosphate, and ferric oxide [1]. Such biomineralized materials generally have complex hierarchical structures with excellent mechanical properties. Although bioinspired approaches have led to the creation of well-defined synthetic structural materials ranging from micro to macro scales, the rational design of discrete biomimetic structures at the nanoscale remains a grand challenge.     

Effects of multiple delays on dynamics of a five-neuron network model

A five-neuron network model with multiple delays is proposed. This paper presents the combined effect of different delays on the dynamics of the proposed network. Pitchfork bifurcation is discussed in detail with the variation of the value of coupled weight or attenuation rate of internal neurons. By analyzing the corresponding characteristic equation, some stable criteria on delay-dependence and delay-independence are derived including multiple delays and coupled weights and the periodic oscillation arises bifurcated from the trivial equilibrium after the network loses its stability. Stable regions on delay-dependence are displayed in the two delayed parameter plane. It is shown that multiple delays can produce stability switching between resting state and periodic activity. Finally, theoretical results are justified by providing two illustrative examples.     

Infinitely many reducts of homogeneous structures

It is shown that the countably infinite dimensional pointed vector space (the vector space equipped with a constant) over a finite field has infinitely many first order definable reducts. This implies that the countable homogeneous Boolean-algebra has infinitely many reducts.