Research on the ions' axial temperature of a sympathetically-cooled 113Cd+ ion crystal

Molecular dynamics simulation of a sympathetically-cooled ¹¹³Cd⁺ ion crystal system is achieved. Moreover, the relationship between ions' axial temperature and different electric parameters, including radio frequency voltage and end-cap voltage is depicted. Under stable trapping condition, optimum radio frequency voltage, corresponding to minimum temperature and the highest cooling efficiency, is obtained. The temperature is positively correlated with end-cap voltage. The relationship is also confirmed by a sympathetically-cooled ¹¹³Cd⁺ microwave clock. The pseudo-potential model is used to illustrate the relationship and influence mechanism. A reasonable index, indicating ions' temperature, is proposed to quickly estimate the relative ions' temperature. The investigation is helpful for ion crystal investigation, such as spatial configuration manipulation, sympathetic cooling efficiency enhancement, and temporal evolution.     

修饰的Ac/Ds转座子元件在油菜中的遗传转化与鉴定

玉米Ac/Ds转座子系统已被成功应用于多种异源植物进行基因的分离与克隆.本研究利用农杆菌介导法将含有Ac元件的质粒pUbiAc及含有Ds元件的质粒pDsBar1300分别转化甘蓝型油菜中双6号的子叶柄与下胚轴,分别获得了Ac和Ds的转化植株.PCR检测发现,在10株Ac转化植株中有1株为阳性苗,阳性率为10%;在28株Ds转化植株中有21株阳性苗,阳性率为75%.该结果为下一步构建油菜突变体群体及开展油菜功能基因组学研究将开辟一个新的途径.     

Optimization of linear cavity design of Yb-doped double-clad fiber laser

The output characteristics of a linear cavity Yb-doped double-clad fiber (DCF) laser, including the effects of fiber length, fiber loss, and output mirror reflectivity on laser output power and threshold pump power have been studied theoretically and experimentally. In this paper, the linear cavity of double-clad fiber laser (DCFL) was composed of a pair of fiber Bragg gratings, while the facet of fiber was anti-reflection (AR) coated at 1070nm to erase the Fresnel reflection. Analysis showed that the laser output increases as     

Optimization of linear cavity design of Yb-doped double-clad fiber laser

The output characteristics of a linear cavity Yb-doped double-clad fiber (DCF) laser, including the effects of fiber length, fiber loss, and output mirror reflectivity on laser output power and threshold pump power have been studied theoretically and experimentally. In this paper, the linear cavity of double-clad fiber laser (DCFL) was composed of a pair of fiber Bragg gratings, while the facet of fiber was anti-reflection (AR) coated at 1070nm to erase the Fresnel reflection. Analysis showed that the laser output increases as the reflectivity of the fiber Bragg grating used as the output mirror decreases. At last, under the pump power of 14.4 W, single-mode laser output at 1070 nm was up to 10.8 W, with slope efficiency of 75 %.     

A step to the decentralized real-time timekeeping network

The composite time scale(CTS) provides an accurate and stable time-frequency reference for modern science and technology. Conventional CTS always features a centralized network topology, which means that the CTS is accompanied by a local master clock. This largely restricts the stability and reliability of the CTS. We simulate the restriction and analyze the influence of the master clock on the CTS. It proves that the CTS’s long-term stability is also positively related to that of the master clo...     

尖晶石型铁酸盐的制备和表征研究

本文采用空气氧化湿法制备尖晶石铁酸盐，得到最佳生成条件为：Ｒ－２ＯＨ＾－／（Ｍ＾２＋＋Ｆ２＋）≥１．０；Ｍ＾２＋／Ｆｅ＾２＋＝０．５摩尔比；氧化温度３４３－３５８Ｋ；氧化时间１０－２５小时。通过ＸＲＤ、ＴＰＲ和ＴＰＤ等方法对其进行表征，讨论了尖晶石型铁酸盐的氧化－还原活及其化学组成和结构的变化。     

Frequency stabilization of a 214.5-nm ultraviolet laser

An improved method for stabilizing a frequency-quadrupled 214.5-nm tunable diode laser system is reported. Improvements to the method include a homemade logic circuit and the use of a Fabry-Perot optical spectrum analyzer as a transfer cavity. Lasers locked with this method exhibit megahertz-level frequency stability measured with an optical frequency comb referenced to a cesium atomic standard. The laser can be locked for hours to days, depending on experiment requirements. Being relatively inexpensive, stable, and robust, the control method can be applied to stabilizing essentially all lasers of deep ultraviolet wavelengths.     

Fiber-based multiple access timing signal synchronization technique

A fiber-based,multiple access timing signal synchronization scheme is demonstrated.By coupling out the bidirectional transmission signals,a highly stable timing signal can be recovered at arbitrary points along the fiber with the help of the loop delay message broadcasted via ethernet from the local module.The experiment is carried out on a 30-km fiber placed in a temperature-controlled box.In one-day period,when the round trip fiber transfer delay fluctuation is60 ns,the fluctuations of the stabilized timing signal from the download and the remote modules were only ±125 ps and±100 ps,respectively.Also,the system error caused by transmission path asymmetry and thermal drift is calibrated,and a100-ps magnitude synchronization accuracy is realized.This method could provide new insights into the construction of a fiber-based time transfer network.     

Investigation of the nonlinear CPT spectrum of ~(87)Rb and its application for large dynamic magnetic measurement

The coherent population trapping(CPT) phenomenon has found widespread application in quantum precision measurements. Various designs based on the narrow resonant spectrum corresponding to the linear Zeeman effect have been demonstrated to achieve high performance. In this article, the nonlinear Zeeman split of the CPT spectrum of ~(87)Rb in the lin||lin setup is investigated. We observe re-split phenomenon for both magnetic sensitive and magnetic insensitive CPT resonant lines at a large magnetic field. The re-split in the magnetic sensitive lines raises a practical problem to magnetometers worked in the lin||lin setup while the other one shows a good potential for applications in large magnetic field. We propose a design based on the nonlinear split of the magnetic insensitive lines and test its performance. It provides a much larger measurement range compared to the linear one, offering an option for atomic magnetometers where a large dynamic range is preferred.     

新型高精度绝对重力仪

精密测量地球表面的重力加速度(g, 常用值9.81 m/s²) 是探测地球重力场的重要途径, 已广泛应用于计量、测绘、地质、地震与资源勘探等领域. 随着我国"2000国家重力基本网"和"中国地壳运动观测网络"的建成, 对高精度绝对重力测量的需求日益增加. 为深入研究现有绝对重力测量技术可能存在的系统误差, 并满足国内多个领域对高精度绝对重力仪的迫切需求, 自主研制T-1型可搬运式高精度绝对重力仪样机, 采用经典的真空自由落体方案, 通过激光干涉测量和数据拟合方法获得重力加速度值. T-1型绝对重力仪主要包括以下几部分: 高真空度自由落体装置、小型化激光干涉测量装置、超低频垂直隔振系统、高速信号采集系统、仪器控制与数据处理系统. 绝对重力测量的长度基准为稳频He-Ne激光器, 时间基准为铷原子钟, 这两项现有基准的测量不确定度都优于1× 10^-9. 测试结果表明, T-1型绝对重力仪在12 h内重力测值的标准差可优于1 μupGal (1 μupGal = 10^-8 m/s²), 测量结果的复现性优于3 μupGal, 可实现微伽量级不确定度的精密重力测量, 有望在我国多个关键领域发挥重要应用.