Dynamic behavior and stability analysis of nonlinear modes in the fourth-order generalized Ginzburg–Landau model with near $$\mathcal{PT}$$ PT -symmetric potentials

Nonlinear Dynamics - Parametrically excited oscillators are used in several domains, in particular to improve the dynamical behaviour of systems like in the case of the parametric amplification or...     

弹性蛋白酶生物催化酯水解的综合实验设计*

酯的水解是有机化学实验教学中的一个重要化学反应,传统的酯水解实验设计是利用酸性或碱性环境在加热的条件下进行水解,而本实验设计将酯水解与生物催化相结合,利用弹性蛋白酶的水解功能,在常温及中性环境下实现对4-三氟甲基-7-丙酰氧基香豆素的水解。该实验设计创新性地将酯水解和酶催化相结合,有利于拓展学生的知识面,培养化学生物学复合型人才。同时,生物催化反应具有反应温和、环境友好等特点,符合当代绿色化学的需求。     

Diastereoselective Synthesis of Pyrazolo[1,2-a][1,2,4]triazine Derivatives via Cross-1,3-dipolar Cyclizations of Azaoxyallyl Cations with N,N′-Cyclic Azomethine Imines

A cross-1,3-dipolar cycloaddition reaction of α-halohydroxamates (in situ generated azaoxyallyl cations) with N,N′-cyclic azomethine imines was developed. The synthetic protocol provided facile and rapid access to pyrazolo[1,2-a][1,2,4]triazine derivatives in good yields and excellent diastereoselectivities under mild metal-free conditions.     

氨基的脱保护——乙酰苯胺水解实验教学设计*

通过开放性设计实验完成氨基脱保护实验的教学。指导学生以回收的乙酰苯胺为原料,自主设计乙酰苯胺在酸、碱条件下水解正交实验方案并分组独立操作,制备并提纯苯胺,比较不同条件下的苯胺收率,筛选出乙酰苯胺最佳的水解条件。对所选实验班级近3年的实验结果进行统计和分析,并通过验证实验考察了结果的可重复性。     

粗糙纳通道内流体流动与传热的分子动力学模拟研究

为研究粗糙表面对纳尺度流体流动和传热及其流固界面速度滑移与温度阶跃的影响,本文建立了粗糙纳通道内流体流动和传热耦合过程的分子动力学模型,模拟研究了粗糙通道内流体的微观结构、速度和温度分布、速度滑移和温度阶跃并与光滑通道进行了比较,并分析了固液相互作用强度和壁面刚度对界面处速度滑移和温度阶跃的影响规律. 研究结果表明,在外力作用下,纳通道主流区域的速度分布呈抛物线分布,由于流体流动导致的黏性耗散使得纳通道内的温度分布呈四次方分布. 并且,在固体壁面处存在速度滑移与温度阶跃. 表面粗糙度的存在使得流体剪切流动产生了额外的黏性耗散,使得粗糙纳通道内的流体速度水平小于光滑通道,温度水平高于光滑通道,并且粗糙表面的速度滑移与温度阶跃均小于光滑通道. 另外,固液相互作用强度的增大和壁面刚度的减小均可导致界面处速度滑移和温度阶跃程度降低. 关键词： 速度滑移 温度阶跃 流固界面 粗糙度     

Oscillatory disturbance in force calibration of optical tweezers

In the calibration of the optical trap stiffness, it is found that there appears an attenuating oscillation as an oscillatory disturbance added to the trapped bead movement, when the scanner is driven by a triangular wave input.An equivalent oscillator model is put forward to explain the mechanism of the oscillatory disturbance. Both the measurements and calculations show that the attenuating oscillation comes from the oscillation of the scanner and the triangular wave drive causes this additional oscillation of the scanner. Furthermore, the analysis indicates that the oscillatory disturbance will become stronger, when the stiffness of the trap increases or the natural frequency of the scanner decreases. We adopt another driving way, i.e. a sinusoidal wave input is used instead of the triangular wave input. Our experiment has verified that in this case the oscillatory disturbance is eliminated completely.     

稀掺杂GaNxAs1－x(x≤0.03)薄膜的调制光谱研究

利用室温下压电调制反射光(PzR)谱技术系统测量了N掺杂浓度为0.0%—3%的分子束外延生长GaN_xAs_1-x薄膜，并对图谱中所观察的光学跃迁进行了指认.在GaN_0.005As_0.995和GaN_0.01As_0.99薄膜的PzR谱中观察到此前只在椭圆偏振谱中才看到的N掺杂相关能态E₁+Δ₁+Δ_N.当N掺杂浓度达到 关键词： 压电调制反射光谱(PzR) xAs_1-x薄膜')" href="#">GaN_xAs_1-x薄膜 分子束外延(MBE)     

Mechanical Properties of Breast Cancer Cell Membrane Studied with Optical Tweezers

Membrane tethers are extracted from breast cancer cells using a force generated by an optical trap. It is experimentally obtained that the radius of tether is about 0.1μm and the static tether force is about 8.5 pN. Calculations based on the experimental measurements give a bending modulus for the tether of 1.35 x 10^-19 N.m and a surface membrane tension of 6.76 x 10^-6 N/m in the breast cancer cell. The treatment with cytochalasin D results in the decreasing bending modulus and decreasing apparent surface tension. When the membrane protein caveolin is over-expressed, similar cases occur in bending modulus and apparent surface tension. In addition, the viscous resistance coefficient of the membrane is calculated to be 1.15pN.s/μm according to the dynamic tether forces obtained under different pulling velocities.     

液滴在气流中破碎的数值分析

液滴的破碎是液体抛撒、破碎和雾化中的一个非常重要的阶段,它直接影响到最终的液滴的尺寸和散布。为了揭示液滴破碎的机理和影响破碎的因素,本文通过应用VOF方法和湍流模型对液滴在气流中的破碎过程进行了数值计算。数值计算得到了与国外实验研究相一致的液滴破碎形状。并根据数值计算的结果,分析了几个特征参数对液滴破碎过程的影响。     

基于双苯并咪唑及二羧酸配体配合物的合成、结构及抗菌活性

利用双苯并咪唑基配体4,4′-二(苯并咪唑-1-甲基)联苯(bbmb)与V形二羧酸配体4,4′-二羧苯基醚(H2dcpe)合成了配合物{[Ni(bbmb)(dcpe)(H_2O)]·2H_2O}_n(1)和{[Mn_2(bbmb)(dcpe)_2(H_2O)]·1.5H_2O}_n(2)。通过红外、元素分析、X射线单晶衍射、热重分析等检测手段对配合物结构进行了表征。配合物1是具有sql拓扑构型的二维层状化合物。配合物2呈现出含有四核锰构型的二维层状结构。体外抗菌实验证明2个配合物都表现出良好的抗菌活性。