Room-Temperature,Metal-Free,and One-Pot Preparation of 2H-Indazoles through a Mills Reaction and Cyclization Sequence

The Mills reaction and cyclization of readily available 2-aminobenzyl alcohols and nitrosobenzenes using thionyl bromide provided 2H-indazoles in up to 88 % yields. In the metal-free process, acetic acid played a crucial role for the both Mills reaction and cyclization. A brominated 2H-indazole could also be obtained through the one-pot sequence.     

Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059     

Modeling Thioredoxin Reductase-Like Activity with Cyclic Selenenyl Sulfides: Participation of an NH⋅⋅⋅Se Hydrogen Bond through Stabilization of the Mixed Se−S Intermediate

At the redox-active center of thioredoxin reductase (TrxR), a selenenyl sulfide (Se−S) bond is formed between Cys497 and Sec498, which is activated into the thiolselenolate state ([SH,Se⁻]) by reacting with a nearby dithiol motif ([SH^Cys59,SH^Cys64]) present in the other subunit. This process is achieved through two reversible steps: an attack of a cysteinyl thiol of Cys59 at the Se atom of the Se−S bond and a subsequent attack of a remaining thiol at the S atom of the generated mixed Se−S intermediate. However, it is not clear how the kinetically unfavorable second step progresses smoothly in the catalytic cycle. A model study that used synthetic selenenyl sulfides, which mimic the active site structure of human TrxR comprising Cys497, Sec498, and His472, suggested that His472 can play a key role by forming a hydrogen bond with the Se atom of the mixed Se−S intermediate to facilitate the second step. In addition, the selenenyl sulfides exhibited a defensive ability against H₂O₂-induced oxidative stress in cultured cells, which suggests the possibility for medicinal applications to control the redox balance in cells.     

Micro‐ and Nano‐Technologies for Lipid Bilayer‐Based Ion‐Channel Functional Assays

Ion channel proteins provide gated pores that allow ions to passively flow across cell membranes. Owing to their crucial roles in regulating transmembrane ion flow, ion channel proteins have attracted the attention of pharmaceutical investigators as drug targets for use in the studies of both therapeutics and side effects. In this review, we discuss the current technologies that are used in the formation of ion channel‐integrated bilayer lipid membranes (BLMs) in microfabricated devices as a potential platform for next‐generation drug screening systems. Advances in BLM fabrication methodology have allowed the preparation of BLMs in sophisticated formats, such as microfluidic, automated, and/or array systems, which can be combined with channel current recordings. A much more critical step is the integration of the target channels into BLMs. Current technologies for the functional reconstitution of ion channel proteins are presented and discussed. Finally, the remaining issues of the BLM‐based methods for recording ion channel activities and their potential applications as drug screening systems are discussed.     

Laplace transform impedance analysis in the two-phase coexistence reaction of spinel Li1 + x Mn2O4 positive electrode

Journal of Solid State Electrochemistry - We demonstrate the Laplace transform (LT) impedance technique for measuring electrochemical lithiation and delithiation in the two-phase system of spinel...     

One-Step Synthesis of Cyclobutene-Annulated Fullerenes through a Cascade Reaction

The physicochemical properties of fullerene-based materials typically vary depending on the type and mode of addition of functional groups; therefore, developing fullerene derivatives with novel structures is imperative for further progress in materials science. In this study, we develop an efficient one-step strategy for synthesizing cyclobutene-annulated fullerene derivatives (cyclobutenofullerenes) and characterize their electronic properties. Despite the steric strain, cyclobutenofullerenes can be easily prepared via a one-step reaction of C₆₀ with a secondary propargylic phosphate. Structural analysis of the reaction intermediates suggests that the cascade reaction proceeds through a formal [2+2] cycloaddition of C₆₀ with an allene, caused by the 1,3-migration of the propargylic phosphate, followed by an additional 1,3-migration and the subsequent 1,2-elimination of the phosphodiester moiety.     

Catalytic Enantioselective Reaction of α‐Phenylthioacetonitriles with Imines Using Chiral Bis(imidazoline)–Palladium Catalysts

The catalytic enantioselective reaction of α‐phenylthioacetonitriles with imines has been developed. The reaction of various imines proceeds in good yields and diastereo‐ and enantioselectivities in the presence of chiral bis(imidazoline)–palladium catalysts. The obtained products can be converted into β‐aminonitrile or β‐aminoamide compounds without loss of enantiopurity.     

Catalytic Alkynylation of Polyfluoroarenes by Amide Base Generated In Situ

We herein demonstrate that the amide base generated in situ from CsF and N(TMS)₃ catalyzes the deprotonative coupling reactions of terminal alkynes with polyfluoroarenes, wherein mono- and dialkynylations occur efficiently for penta- and hexafluorobenzenes, respectively. Tetraalkynylated products could also be synthesized from dialkynylated compounds.     

1,4‐Bis[2‐(4‐ferrocenylphenyl)ethynyl]anthraquinone from synchrotron X‐ray powder diffraction

The title compound, [Fe₂(C₅H₅)₂(C₄₀H₂₂O₂)] or 1,4‐(FcPh)₂Aq [where FcPh is 2‐(4‐ferrocenylphenyl)ethynyl and Aq is anthraquinone], was synthesized in an attempt to obtain a new solvent‐incorporating porous material with a large void space. Thermodynamic data for 1,4‐(FcPh)₂Aq show a phase transition at approximately 430 K. The crystal structure of solvent‐free 1,4‐(FcPh)₂Aq was determined at temperatures of 90, 300 and 500 K using synchrotron powder diffraction data. A direct‐space method using a genetic algorithm was employed for structure solution. Charge densities calculated from observed structure factors by the maximum entropy method were employed for model improvement. The final models were obtained through multistage Rietveld refinements. In both phases, the structures of which differ only subtly, the planar Aq fragments are stacked alternately in opposite orientations, forming a one‐dimensional column. The FcPh arms lie between the stacks and fill the remaining space, leaving no voids. C—H...π interactions between the Ph and Fc fragments mediate crystal packing and stabilization.