Low-Cost Synthesis of Fullerene Derivatives

Refined mixed fullerenes were used as a reagent in known organic reactions instead of the pure fullerene C₆₀ with aim to find an alternative, low-cost method for the synthesis of fullerene derivatives potentially exhibiting photoconductive properties. The isolation of C₆₀ or C₇₀ in clean form without admixtures requires the use of large quantities of toluene or other nonpolar solvents, polluting the environment and multiplying the production cost. 1,3-Dipolar cycloaddition of azomethine ylide to fullerite was chosen because this reaction is one of the most widely used for fullerene functionalization, producing material possibly presenting photoinducing behavior. The data showed that the use of the cheaper mixed fullerenes instead of pure C₆₀ leads to the isolation of the same expected products with similar yields. The photoelectric properties of mixed fullerenes and their organic derivatives were also examined. A slightly semiconductive behavior was confirmed as well as a noticeable photoresponse.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Synthesis of fullerene building blocks bearing alkyne or azide groups and their subsequent functionalization by the copper mediated Huisgen 1,3-dipolar cycloaddition

C₆₀ derivatives bearing either terminal alkyne or azide functional groups have been prepared and used as building blocks under the copper mediated Huisgen 1,3-dipolar cycloaddition conditions. In general, the reactivity of C₆₀ toward azides does not significantly compete with the cycloaddition leading to the desired 1,2,3-triazole derivatives and good yields can be obtained when fullerene derivatives with reasonable solubility are used as starting materials. The electrochemical properties of the new fullerene derivatives have also been investigated by cyclic voltammetry (CV) and Osteryoung Square Wave Voltammetry (OSWV).     

Synthesis of [60]fullerene-glycopyranosylaminopyrimidin-4-one conjugates

The synthesis of several C₆₀ derivatives containing a 6-(β-d-glycopyranosylamino)pyrimidin-4-one unit and a C₆₀-uridine conjugate is described. The fullerene derivatives bearing a 4-(β-d-glycopyranosylamino)pyrimidin-4-one moiety were synthesised by 1,3-dipolar cycloaddition reactions of C₆₀ with azomethine ylides generated in situ from the corresponding 5-formylpyrimidin-4-one derivatives and N-methylglycine. The synthesis of the C₆₀-uridine conjugate involved the selective protection of the 2′- and 3′-hydroxyl groups of uridine, esterification, cyclopropanation of C₆₀ and, finally, the deprotection of the hydroxyl groups. One of the fullerene-glycopyranosylaminopyrimidin-4-one conjugates was characterised by single-crystal X-ray crystallography. Differentiation between pairs of diastereoisomers, for several fullerene derivatives, was achieved through the study of their gas-phase fragmentations.     

Base-promoted reaction of C60Cl6 with thioamides: an access to [60]fullereno[1,9-d] thiazoles

Regioselective reaction of C₆₀Cl₆ with thioamides via a radical annulation to form fullereno thiazole derivatives is reported. The reaction is promoted by K₂CO₃, which might deprotonate thioamide to initiate a single electron transfer from thioamide anion to C₆₀Cl₆. The experiments with various thioamides establish the proposed base-promoted reaction as a facile route for synthesis of fullereno fused thiazole derivatives starting from C₆₀Cl₆, a prevalent synthon in fullerene chemistry. In addition, the tunable electrochemical properties of the fullereno thiazole products have been investigated for their potential photovoltaic application.     

Star-shaped polymers with the fullerene C60 branching center

The anionic methods for the synthesis of homo- and heteroarm (hybrid) star-shaped polymers using fullerene C₆₀ aPre considered. The possibilities of fullerene C₆₀ as an agent of combination of living polymer chains and the procedures of transformation of polymer derivatives of C₆₀ (hexaadducts) into polyfunctional macroinitiators of anionic polymerization of vinyl monomers are shown. The methods for functionalization of polymer fullerene derivatives and their combinations into structures of complex controlled architecture are presented. The structural features and initiating properties of the living polymer fullerene derivatives and their role in the formation of heteroarm star-shaped macromolecules with the controlled number of branches and predetermined molecular weight characteristics of the arms are discussed. The hydrodynamic properties of the star-shaped fullerene-containing polymers are considered. The data on the small-angle neutron scattering study of self-organization of the stars in solutions are presented.     

Corannulene Chalcogenides

The introduction of chalcogen atoms into a polycyclic aromatic hydrocarbon structure is an established method to tune material properties. In the context of corannulene (C₂₀H₁₀), a fragment of fullerene C₆₀, such structural adjustments have given rise to an emerging class of functional and responsive molecular materials. In this minireview, our aim is to discuss the synthesis and properties of such chalcogen (sulfur, selenium, and tellurium) derivatives of corannulene.     

[60]Fullerene diol issued from pentaerythritol derivatives

A new [60]fullerene diol is synthesized in good yield, in two steps starting from reaction of C₆₀²⁻ anion with the benzylideneacetal derived from 2,2-bis(iodomethyl)-1,3-propanediol. The corresponding [60]fullerene bis-mesylate is also formed in a similar way starting from bis-iodo bis-mesylate compound in the same series. The scope of this fullerene diol in synthesis is exemplified by its easy esterification with 4-formyl benzoyl chloride.     

Regioselective synthesis of tetra(aryl)-mono(silylmethyl)[60]fullerenes and derivatization to methanofullerene compound

A method for the facile synthesis of tetraaryl-trimethylsilylmethyl-hydro[60]fullerenes, C₆₀Ar₄(CH₂SiMeR)H, has been developed in which readily prepared anionic mono(silylmethyl) fullerene is subjected to reaction conditions for organocopper-mediated multiple addition. Penta(organo)fullerene derivatives bearing different substituents and diverse functionality were synthesized in moderate to good yield under simple and mild reaction conditions. Further organic and organometallic transformations of these fullerenes allowed us to synthesize transition-metal complexes and a new methanofullerene derivative, 1,9-methano-6,12,15,18-tetraphenyl[60]fullerene, C₆₀Ph₄(CH₂).     

双亲性C60衍生物水相聚集行为

富勒烯C₆₀几乎不溶于水中,从而阻碍了对富勒烯的进一步研究和潜在应用。双亲性C₆₀衍生物在水相中自组装形成聚集体,在水相具有一定的溶解度,其特殊的结构及性能引起了科学家的广泛关注。本文对双亲性C₆₀衍生物在水相中聚集行为的研究现状及研究进展进行了详细系统的介绍。本文第一部分主要阐述了双亲性C₆₀衍生物的结构,根据修饰到C₆₀表面的功能基类型对双亲性C₆₀衍生物进行了分类。第二部分主要阐述了双亲性C₆₀衍生物在水相的聚集行为以及pH值、溶剂极性、浓度、温度和抗衡离子等因素对聚集行为的影响。     

单加成环丙烷富勒烯膦酸酯衍生物的合成与电化学性能

在Mn(OAc)₃•2H₂O催化下, C₆₀分别和亚甲基二膦酸四乙酯、氰基亚甲基膦酸二乙酯或乙氧羰基亚甲基膦酸二乙酯在氯苯中回流, 生成3个单加成环丙烷富勒烯膦酸衍生物C₆₀C(R)PO(OEt)₂ [1, R＝PO(OEt)₂; 2, R＝COOEt; 3, R＝CN]. 与以前报道的Bingel反应法相比, 该方法副产物少并且缩短了反应时间. 采用循环伏安法发现1, 2的还原电位相对于C₆₀发生负移, 而3的还原电位相对于C₆₀却正移40 mV, 表明引入象氰基一样具有很强吸电子能力的取代基团, 可以改善富勒烯球的电化学性能, 合成电子接受能力较强的富勒烯衍生物.     

Synthesis of [60]fullerene-coumarin polyads

New polyads were obtained by covalently linking a coumarin dye to a fullerene (C₆₀) following two different strategies: 1,3-dipolar cycloaddition reaction of azomethine ylides or by cyclopropanation reaction. The new polyads are spectroscopically characterized and their fluorescence properties, including the observation of efficient singlet-singlet energy transfer, reported.     

Mono‐ and Bis(pyrrolo)tetrathiafulvalene Derivatives Tethered to C60: Synthesis,Photophysical Studies,and Self‐Assembled Monolayers

A series of mono‐ (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C₆₀ moieties was synthesized and characterized. The synthetic strategy for these dumbbell‐shaped compounds was based on a 1,3‐dipolar cycloaddition reaction between aldehyde‐functionalized MPTTF/BPTTF derivatives, two different tailor‐made amino acids, and C₆₀. Electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution‐based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C₆₀ moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF–C₆₀ and C₆₀–BPTTF‐C₆₀ dyad and triad molecules formed self‐assembled monolayers on a Au(111) surface by anchoring to C₆₀.     

Exploring the photoinduced electron transfer reactivity of aza[60]fullerene iminium cation

Photolysis of (C₅₉N)₂ solutions in the presence of neutral π-donors, such as arenes and electron-rich alkenes leads to a series of novel aza[60]fullerene monoadducts. The key step of the reaction involves a photoinduced electron transfer from the donor molecule to the iminium cation of aza[60]fullerene, followed by radical coupling of the resulting aza[60]fullerenyl radical with an intermediate stabilized radical derived from the substrate. This type of reactivity has been proven efficient with arenes having oxidation potential higher than about 1.5 V. Simple olefins, such as tri- and tetra-methylethylene, as well as cyclohexene, can also participate in this kind of photoinduced electron transfer-initiated reaction with C₅₉N⁺, affording the corresponding aza[60]fullerene derivatives. In the case of 2-methoxyprop-1-ene, 2,4-hexadiene, and β,β-dimethylstyrene, [2+2] cycloaddition reactions with the aza[60]fullerene carbon shell dominate, leading to a mixture of unidentified multiadducts.     

Cyclodextrin-[60]fullerene conjugates: synthesis, characterization, and electrochemical behavior

Three different functionalized β-cyclodextrins (β-CDs) bearing the C₆₀ moiety linked covalently have been prepared in good yields by reaction between the parent β-CD and [60]fullerene via 1,3-dipolar cycloaddition. These compounds have been fully spectroscopically characterized and their electrochemical behavior has been investigated. Surprisingly, the electrochemical properties of the C₆₀ cage remain unaltered even after chemical functionalization, making these systems very appealing as supramolecular hosts for electron-transfer processes.     

Liquid‐Crystalline Mixed [5 : 1]Hexa‐adducts of [60]Fullerene. Preliminary Communication

A liquid‐crystalline mixed [5 : 1]hexa‐adduct of [60]fullerene was synthesized by addition of two different malonate derivatives onto C₆₀. The hexa‐adduct derivative 2 was prepared by a stepwise synthetic procedure (fullerene→mono‐adduct of C₆₀→hexa‐adduct of C₆₀). Cyanobiphenyl and octyloxybiphenyl derivatives were selected as mesogens. The malonate derivatives showed either a monotropic nematic phase or a monotropic smectic A phase, and the hexa‐adduct derivative gave rise to an enantiotropic smectic A phase.     

Self‐Assembly of Fullerene‐Based Janus Particles in Solution: Effects of Molecular Architecture and Solvent

Two molecular Janus particles based on amphiphilic [60]fullerene (C₆₀) derivatives were designed and synthesized by using the regioselective Bingel–Hirsh reaction and the click reaction. These particles contain carboxylic acid functional groups, a hydrophilic fullerene (AC₆₀), and a hydrophobic C₆₀ in different ratios and have distinct molecular architectures: 1:1 (AC₆₀–C₆₀) and 1:2 (AC₆₀–2C₆₀). These molecular Janus particles can self‐assemble in solution to form aggregates with various types of micellar morphology. Whereas vesicular morphology was observed for both AC₆₀–C₆₀ and AC₆₀–2C₆₀ in tetrahydrofuran, in a mixture of N,N‐dimethylformamide (DMF)/water, spherical micelles and cylindrical micelles were observed for AC₆₀–C₆₀ and AC₆₀–2C₆₀, respectively. A mechanism of formation was tentatively proposed based on the effects of molecular architecture and solvent polarity on self‐assembly.     

Synthesis of star poly(1,3‐cyclohexadiene): Grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto C60

The grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto fullerene‐C₆₀ (C₆₀) was strongly affected by the nucleophilicity of poly(1,3‐cyclohexadiene) (PCHD) carbanions and the polymer chain microstructure, and progressed via step‐by‐step reactions. A star‐shaped PCHD, having a maximum of four arms, was obtained from poly(1,3‐cyclohexadienyl)lithium composed of all 1,4‐cyclohexadiene (1,4‐CHD) units. The rate of the grafting reaction was accelerated by the addition of amine. The grafting density of PCHD arms onto C₆₀ decreased with an increase in the molar ratio of 1,2‐cyclohexadiene (1,2‐CHD) units. The electron‐transfer reaction from PCHD carbanions to C₆₀ did not occur in either a nonpolar solvent or a polar solvent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3282–3293, 2008.     

Investigation of fullerene C60 effect on properties of polymethylmethacrylate exposed to ionizing radiation

Effect of fullerene C₆₀ was investigated on thermal, mechanical and optical properties of polymethylmethacrylate (PMMA) under ionizing radiation. It was stated that fullerene C₆₀ behaves as an effective antirad with respect to PMMA. Fullerene C₆₀ addition raises temperature of destruction for polymer subjected to electron radiation by 20-25 °C, lowers the rate from 4 to 4.5 times and increases the activation barrier for radiated PMMA destruction reaction. Fullerene C₆₀ addition promotes improvement of strength properties of PMMA: for films containing C₆₀ addition and else subjected to electron radiation treatment a decrease in rupture strength is 10-15%, for samples containing no fullerene it equals ∼25%. Interaction of free radicals with fullerene at radiation treatment influences optical characteristics of PMMA films.     

1,3-Dipolar addition reactions to fullerenes: the role of the local curvature of carbon surface

Structural peculiarities of fullerenes C₂₀, C₂₄, C₃₀, C₃₆, C₄₀, C₆₀, C₇₀, and C₇₆ and their adducts with 1,3-dipolarophiles (ozone and diazomethane) were investigated by the DFT method with the PBE functional. A correlation between the heats of 1,3-dipolar addition reactions and the carbon surface curvatures at reaction sites in the original fullerene molecules was found.     

Fullerene-Acetylene Molecular Scaffolding: Chemistry of 2-functionalized 1-ethynylated C60, oxidative homocoupling,hexakis-adduct formation,and attempted synthesis of C

On the way to the fullerene-acetylene hybrid carbon allotropes 2 and 6 , the oxidative homocoupling of the 2-functionalized 1-ethynylated C₆₀ derivatives 11, 12, 14 , and 15 was investigated. Under Glaser-Hay conditions, the two soluble dumbbell-shaped bisfullerenes 17 and 18 , with two C₆₀ moieties linked by a buta-1,3-diynediyl bridge, were formed in 52 and 82% yield, respectively (Scheme 2). Cyclic-voltammetric measurements revealed that there is no significant electronic communication between the two fullerene spheres via the buta-1,3-diynediyl linker. Removal of the 3,4,5,6-tetrahydro-2H-pyran-2-yl (Thp) protecting groups in 18 gave in 80% yield the highly insoluble dumbbell 19 with methanol groups in the 2,2′-positions of the buta-1,3-diynediyl-bridged carbon spheres. Attempted conversion of 19 to the all-carbon dianion 6 (C) via base-induced elimination of formaldehyde was not successful presumably due to exo-dig cyclization of the formed alkoxides. The occurrence of this cyclization under furan formation was proven for 2-[4-(trimethylsilyl)buta-1,3-diyn-1-yl][60]fullerene-1-methanol ( 21 ), a soluble model compound for 19 (Scheme 3). To compare the properties of ethynylated fullerene mono-adducts to those of corresponding higher adducts, hexakis-adducts 26 and 28 with an octahedral functionalization pattern resulting from all-e (equatorial) additions were prepared by the reversible-template method of Hirsch (Scheme 4). Reaction of the ethynylated mono-adducts 25 or 13 with diethyl 2-bromomalonate/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in the presence of 1,9-dimethylanthracene (DMA) as reversible template led to 26 and 28 in 28 and 22% yield, respectively. Preliminary experiments indicated a significant change in reactivity and NMR spectral properties of the fullerene addends with increasing degree of functionalization.