Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059     

Ligand Design to Acquire Specificity to Intended G-Quadruplex Structures

A G-quadruplex is a nucleic acid secondary structure that is adopted by guanine-rich sequences, and is considered to be relevant in various pharmacological and biological contexts. G-Quadruplexes have also attracted great attention in the field of DNA nanotechnology because of their extremely high thermal stability and the availability of many defined structures. To date, a large repertory of DNA/RNA G-quadruplex-interactive ligands has been developed by numerous laboratories. Several relevant reviews have also been published that have helped researchers to grasp the full scope of G-quadruplex research from its outset to the present. This review focuses on the G-quadruplex ligands that allow targeting of specific G-quadruplexes. Moreover, unique ligands, successful methodologies, and future perspectives in relation to specific G-quadruplex recognition are also addressed.     

In silico modeling of PAX8–PPARγ fusion protein in thyroid carcinoma: influence of structural perturbation by fusion on ligand-binding affinity

Journal of Computer-Aided Molecular Design - Paired box 8 (PAX8)–peroxisome proliferator-activated receptor γ (PPARγ) rearrangement is believed to play an important role in...     

Palladium(II)‐Catalyzed Dehydroboration via Generation of Boron Enolates

The Pd^II‐catalyzed dehydroboration of boron enolates generated from ketones and 9‐iodo‐9‐borabicyclo[3.3.1]nonane was achieved, providing a synthetically versatile protocol from ketones to α,β‐unsaturated ketones. The Pd^II compound employed in this reaction worked catalytically in the presence of Cu(OAc)₂. The high trans‐selectivity of the olefinic moiety was observed. Aryl halide moieties (‐Br and ‐Cl) remained intact for this reaction in spite of the presence of a Pd species. An ester substrate could also be applied when a stoichiometric amount of Pd^II was used. The crossover reactions using boron and silyl enolates revealed that the oxidation reaction is much faster than the Saegusa‐Ito reaction.     

Dominant Li+ ion conduction in Li+/Na+ mixed crystal, 15NaI∙LiBH4

Journal of Solid State Electrochemistry - In the present work, the conduction ions in 15NaI∙LiBH4 are investigated by secondary ion mass spectroscopy (SIMS) and galvanostatic measurements. An...     

Polyaniline‐Induced CH Arylation of Arenes with Arenediazonium Salts

A reduced form of polyaniline has been shown to induce direct arylation of an arenediazonium salt with an arene (Gomberg–Bachmann reaction) to give the cross‐coupling product in moderate to good yields under mild conditions. Various arenediazonium salts and arenes, including heteroarenes such as furans, thiophenes, and pyrroles, are employed for the reaction. The most favorable combination of substrates is an electron‐poor arenediazonium salt with an electron‐rich heteroarene. Investigation of the mechanism by reactions with radical scavengers and experiments on kinetic isotope effects indicated the occurrence of a radical chain reaction initiated by one‐electron reduction of an arenediazonium salt by the polyaniline. Only 1 mol % (based on aniline tetramer) of the polyaniline is required for the cross‐coupling reaction to occur. This reaction proceeds under metal‐free conditions and with no need for photonic activation.     

Shape and structure recovery of an LCP droplet under a large step strain: observation and stress calculation

Shape recovery of a droplet of liquid crystalline polymer (LCP) hydroxypropylcellulose in a matrix of poly(dimethyl siloxane) subjected to a step shear strain has been studied via optical microscopy. Just after application of a large strain, the LCP droplet shape is flat ellipsoid, and then the droplet takes cylindrical shape and band texture perpendicular to the flow direction appears. The band texture fades away before emergence of poly-domain structure. In the final process with the shape of spheroid, poly-domain structure recovers very slowly. Except for the final process, the shape change is identical with that of isotropic droplet at strains smaller than 3, when the LCP viscosity in Region II is taken as an equivalent viscosity for normalization. For a 20:80 blend, the excess relaxation modulus is calculated based on the Doi-Ohta theory, taking account of the distribution of droplet size and compared with experimental modulus data.     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605