制作高密度衍射光栅的光电式刻划控制的研究

高精度的光电式刻划控制系统是制作高密度母光栅的关键技术,以光栅干涉仪为控制核心,设计了光电式的光栅刻划控制系统,并对可能产生的加工误差进行了初步的分析;采用该控制系统的光栅刻划实践表明,所设计的光电式刻划控制系统已完全达到了高密度衍射光栅的亚微米栅距分度要求。     

TiN/Al2O3纳米多层膜的共格外延生长及超硬效应

采用多靶磁控溅射法制备了一系列具有不同Al2O3调制层厚度的TiN/Al2O3纳米多层膜.利用X射线能量色散谱、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜和微力学探针表征了多层膜的成分、微结构和力学性能.研究结果表明,在TiN/Al2O3纳米多层膜中,单层膜时以非晶态存在的Al2O3层在厚度小于1.5 nm时因TiN晶体层的模板效应而晶化,并与TiN层形成共格外延生长,相应地,多层膜产生硬度明显升高的超硬效应,最高硬度可达37.9 GPa.进一步增加多层膜中Al2O3调制层的层厚度,Al2O3层逐渐形成非晶结构并破坏了多层膜的共格外延生长,使得多层膜的硬度逐步降低.     

A projection method for solving incompressible viscous flows on domains with moving boundaries

In this paper, a projection method is presented for solving the flow problems in domains with moving boundaries. In order to track the movement of the domain boundaries, arbitrary‐Lagrangian–Eulerian (ALE) co‐ordinates are used. The unsteady incompressible Navier–Stokes equations on the ALE co‐ordinates are solved by using a projection method developed in this paper. This projection method is based on the Bell's Godunov‐projection method. However, substantial changes are made so that this algorithm is capable of solving the ALE form of incompressible Navier–Stokes equations. Multi‐block structured grids are used to discretize the flow domains. The grid velocity is not explicitly computed; instead the volume change is used to account for the effect of grid movement. A new method is also proposed to compute the freestream capturing metrics so that the geometric conservation law (GCL) can be satisfied exactly in this algorithm. This projection method is also parallelized so that the state of the art high performance computers can be used to match the computation cost associated with the moving grid calculations. Several test cases are solved to verify the performance of this moving‐grid projection method. Copyright © 2004 John Wiley Sons, Ltd.     

Spectral Domain Analysis of Coaxial Cavities

Coaxial cavities are used in high power gyrotrons as the beam-wave interaction structure. Much research has been devoted to their mode selective properties. A coaxial cavity lacks a sharp boundary at its open end, so it has some physical features that can only be observed using a spectral model, such as frequency-dependent field profiles and mode overlapping effects. These properties are important since cold tests are usually conducted in the frequency domain. This study applies the incident/reflected wave boundary condition to the wave equation of a weakly irregular coaxial waveguide. The resistivity of the wall is considered in the analysis. Calculations reveal that the fixed-position spectrum yields an uncertain resonant frequency and quality factor. Although the maximum-field spectrum can uniquely determine the properties of the coaxial cavity, the resonant frequency obtained using the maximum-field spectral model is inconsistent with that obtained using the temporal model. The field-energy spectrum explains the low Q nature of the coaxial cavity. Moreover, resonant frequencies evaluated using the field-energy spectrum agree precisely with those evaluated using the temporal model.     

Synthesis and characterization of wholly aromatic poly(azomethine)s containing donor–acceptor triphenylamine moieties

N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine was synthesized from N‐(4‐nitrophenyl)‐diphenylamine by the Vilsmeier‐Haack reaction. Soluble aromatic poly(azomethine)s (PAMs) were prepared by the solution polycondensation of N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine and aromatic diamine in N‐methyl‐2‐pyrrolidone (NMP) at room temperature under reduced pressure. All the PAMs are highly soluble in various organic solvents, such as N,N‐dimethylacetamide (DMAc), chloroform (CHCl₃), and tetrahydrofuran (THF). Differential scanning calorimetry (DSC) indicated that these PAMs had glass‐transition temperatures (T_gs) in the range of 170–230 °C, and a 10% weight‐loss temperatures in excess of 490 °C with char yield at 800 °C in nitrogen higher than 60%. These PAMs in NMP solution showed UV‐Vis charge‐transfer (CT) absorption at 405–421 nm and photoluminescence peaks around 462–466 nm with fluorescence quantum efficiency (Φ_F) 0.10–0.99%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these PAMs can be determined from cyclic voltammograms as 4.86–5.43 and 3.31–3.34 eV, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4921–4932, 2007     

氯化π-单取代环戊二烯基镍(Ⅱ)的双齿膦配合物合成和催化

合成了化学式为[(η~5一RC_5H_4)NiPh_2P(CH_2).PPh_2]Cl的六个配合物(式中R=Me,Et;n=2(dppe ).n=3(dppp),n=4(dppb).并用IR和~1H NMR对其进行了表征.考察并讨论了它们对苯基溴化镁与氯化苄和反式-均二氯乙烯交叉偶联反应的催化活性.     

硫化镉纳米荧光探针荧光猝灭法测定痕量铜

制备了无机纳米溶胶CdS，研究了纳米粒子的大小和荧光性质，以该纳米粒子为探针，建立了荧光猝灭法测定铜离子的新方法。该方法已成功用于人发样品测定，方法简单，快速，选择性好，灵敏度高，在最佳实验条件下，测定铜离子的线性区间为2．0－24．0μg/L，检出限为0．23μg/L。     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．     

鲁米诺－亮绿SF－过氧化氢－铜（Ⅱ）化学发光体系的研究

本文报道了鲁米格亮绿ＳＦ－过氧化氢。铜（Ⅱ）化学发光体系，建立了测定微量铜的化学发光新方法。相对标准偏差为２．４％（ｎ＝１０），检出限为１．６×１０￣－９ｍｏｌ·Ｌ￣－１。用于人发、茶叶及铜精矿样品中微量铜的测定，结果令人满意。