Kinetics and isothermal adsorption of U(VI) in aqueous solution by nano-Ni0

Journal of Radioanalytical and Nuclear Chemistry - The nanoscale zero-valent nickel (nano-Ni0) was prepared by liquid-phase reduction method and characterized by BET, XPS, FT-IR and XRD and be used...     

Demonstration of joule-level chirped pulse amplification based on tiled Ti:sapphire amplifier

A novel tiled Ti:sapphire(Ti:S)amplifier was experimentally demonstrated with>1 J amplified chirped pulse output.Two Ti:S crystals having dimensions of 14 mm×14 mm×25 mm were tiled as the gain medium in a four-pass amplifier.Maximum output energy of 1.18 J was obtained with 2.75 J pump energy.The energy conversion efficiency of the tiled Ti:S amplifier was comparable with a single Ti:S amplifier.The laser pulse having the maximum peak power of 28 TW was obtained after the compressor.Moreover,the influence of the beam gap on the far field was discussed.This novel tiled Ti:S amplifier technique can provide a potential way for 100 PW or EW lasers in the future.     

A BODIPY-based highly emissive dye with thiophene-based branch harvesting the light

ABSTRACT

A novel BODIPY-based dye with highly emissive character was configured by Sonogashira coupling and routinely characterized by NMR and MS technology. The emission of dye was investigated in solution/film/solid and shows intensive emission. In solution, the emission peak appeared around 510 nm with little influence by the polar environment. The terthiophene plays an effective antenna effect, harvesting the light and transferring the energy to BODIPY. The pseudo Stoke's shift enlarged to ～170 nm in solution. In film, the emission peak shifted to 563 nm in polycarbonate matrix. And it shifted further to 585 nm in solid due to the highly twisted structure, which avoided closely regular-tight packing. The dye rendered an intense fluorescence, good optothermal stability, and high fluorescence quantum yield (0.55). The solid emission showed highly red emission with Commission Internationale de L'Eclairage (CIE) coordinates of (X = 0.69, Y = 0.31). Thus, the synthesized dye is idea candidate for emitting materials.     

Taming of Singlet Oxygen: Towards Artificial Oxygen Carriers Based on 1,4-Dialkylnaphthalenes

Naphthalene endoperoxides are known as convenient sources of singlet oxygen (O₂, ¹Δ_g), which is the major product of endoperoxide cycloreversion reaction. However, their potential as carriers of ground-state molecular oxygen (O₂, ³Σ_g) similar to artificial oxygen carriers remains largely unexplored. This is due to the extreme reactivity and cytotoxic effects of the released singlet oxygen. We now report that a compound with a bimodular design, which incorporates an endoperoxide and an efficient physical quencher of singlet oxygen, 1,4-diazabicyclo[2.2.2]octane (DABCO), produces exclusively ground-state molecular oxygen. This result, coupled with the fact that oxygen release rates from endoperoxides are highly amenable to fine-tuning in a very broad range, and open to targeting by ligand attachment, raises the potential of these compounds far above any comparable chemical, or even biochemical sources. In cell culture experiments, we showed that the addition of the endoperoxide-quencher conjugate can enhance and sustain cell proliferation.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.     

Photoelectrochemical oxygen atom transfer enabling efficient selective oxygenation

Photoelectrochemical(PEC)technique represents a promising approach to chemical transformation by harvesting sustainable solar energy.Despite the wide applications of PEC systems such as environmental remediation and solar energy conversion,the reported PEC reactions are dominated by the radical-based processes that are initiated by the single electron transfer between photo-induced carriers and adsorbed species on photoelectrode surface[1,2].For instance,hydroxyl radicals are often involved in the PEC oxidation reactions.As well known,it is a grand challenge to control the formation and evolution rates of radicals,which inevitably leads to the unsatisfactory product selectivity of PEC reactions.Naturally,such a circumstance brings about a question to the research community whether a different mechanism can be established to sustain efficient and selective oxygenation.Recently,based on their previous findings on PEC water oxidation[3,4],Zhao and coworkers[5]reported that many substrates can be oxidized in an oxygen atom transfer(OAT)pathway,a non-radical two electron process,to oxygenated products byα-Fe2O3 photoanodes.     

In-situ preparation and electrochromic properties of TiO2/PTPA-HTAN core-shell nanocomposite film

A new star-shaped structure conjugated microporous polymers, poly (2,8,14-tri[4-diphenyl-benzene]-hexaazatrinaphthylene) (PTPA-HATN), was designed and in-situ electrochemically polymerized on the surfaces of FTO electrodes with a directional alignment TiO₂ nanorod array to obtain TiO₂/PTPA-HATN core-shell nanocomposite films. Compared with the PTPA-HATN film, the TiO₂/PTPA-HATN composite film exhibits higher optical contrast and faster response time, with contrast of 57% at 783 nm, coloring time of 3.62 s and discoloring time of 2.55 s (43%, 4.63 s and 4.77 s for PTPA-HATN film, respectively). After 400 cycles, the contrast of nanocomposite film decreased by 28%, while the PTPA-HATN film basically lost its electrochromic properties. A simple three-layer EC prototype device based on TiO₂/PTPA-HATN nanocomposite film constructed with hydrogel electrolyte clearly shows color changes at different voltages. On the one hand, the formation of core-shell porous nanostructure of TiO₂/PTPA-HATN composite film provides a larger ion doping/de-doping interface, shortening the average diffusion length of ions. On the other hand, the large indented polymer-nanorods contact interface makes it difficult for the polymer to detach from the electrode, thus significantly improving the cyclic stability of the composite film.     

Multifunctional fibrous wound dressings for refractory wound healing

Refractory wounds have always been an important issue to healthcare systems, whose healing process is always delayed by multiple factors, including bacterial infections, chronic inflammation, and excessive exudates, etc. Employing multifunctional wound dressings is recognized as an effective strategy to deal with refractory wounds, which has yielded promising outcomes in recent years. Among these advanced wound dressings, fibrous dressings have gained growing attention due to their unique merits. Such wound dressings have demonstrated great potential in delivering theranostic agents, such as antibacterial agents, anti-inflammatory drugs, growth factors, and diagnostic probes, etc., for the purposes of accelerating wound healing. This paper reviews the development of multifunctional fibrous dressings and their applications in treating refractory wounds. The construction approaches of novel fibrous dressing with capabilities of antibacterial, anti-inflammation, exudate management and diagnosis were also introduced. Furthermore, the existing problems and challenges are also discussed briefly.     

Electrochemically Assisted Cycloaddition of Carbon Dioxide to Styrene Oxide on Copper/Carbon Hybrid Electrodes: Active Species and Reaction Mechanism

A novel electrochemically assisted cycloaddition process is proposed, in which highly efficient coupling of CO₂ with styrene oxide (SO) can be achieved to form styrene carbonate (SC) as a high-value-added product. A series of Cu catalysts with different morphologies and chemical states were fabricated on carbon paper (CP) by using in-situ electrodeposition, and the sample with nano-dendrimer structure was found to exhibit a relatively high activity of 74.8 % SC yield with 92.7 % SO conversion under gentle reaction conditions, thus showing its potential for practical applications. The relatively high electrochemically active surface area and charge transfer ability of dendrimer-like Cu benefited the electrochemical reaction. In particular, the Cu²⁺ species that were formed in situ during the reaction played a vital role in enhancing the activity and selectivity of the proposed Cu/CP hybrid catalyst. Cu²⁺ atoms served as active sites that can not only electrochemically activate CO₂ but also facilitate the ring opening of SO. Mechanistic analysis suggested that the reaction followed electrochemical and liquid-phase heterogeneous paths, which provide a new green and sustainable route for efficient utilization of CO₂ resources for fine chemical electrosynthesis.     

A Tailored Versatile and Efficient NHC-Based NNC-Pincer Manganese Catalyst for Hydrogenation of Polar Unsaturated Compounds

The reactivity of metal-hydride complexes can be harnessed by the modification of ancillary ligands. With the aim of improving the hydride-donor ability of the key Mn−H intermediate and reducing steric hindrance, we herein report the rational design of a versatile and efficient NHC-based NNC-pincer Mn catalyst for hydrogenation reactions. This newly developed catalyst exhibited higher activity than the corresponding NNP-pincer Mn catalyst owing to its reduced steric hindrance and enhanced Mn−H σ-bonding orbital energy level through a π-antibonding interaction. Using this highly active NNC-pincer Mn catalyst, a rich array of polar unsaturated compounds (>80 examples) including esters, N-heteroarenes, amides, carbonates, and urea derivatives, were successfully hydrogenated under relatively mild conditions. This work represents a rare example of a general phosphine-free Mn-catalyzed hydrogenation system.