Unveiling the Activity Origin of a Copper-based Electrocatalyst for Selective Nitrate Reduction to Ammonia

Unveiling the active phase of catalytic materials under reaction conditions is important for the construction of efficient electrocatalysts for selective nitrate reduction to ammonia. The origin of the prominent activity enhancement for CuO (Faradaic efficiency: 95.8 %, Selectivity: 81.2 %) toward selective nitrate electroreduction to ammonia was probed. ¹⁵N isotope labeling experiments showed that ammonia originated from nitrate reduction. ¹H NMR spectroscopy and colorimetric methods were performed to quantify ammonia. In situ Raman and ex situ experiments revealed that CuO was electrochemically converted into Cu/Cu₂O, which serves as an active phase. The combined results of online differential electrochemical mass spectrometry (DEMS) and DFT calculations demonstrated that the electron transfer from Cu₂O to Cu at the interface could facilitate the formation of *NOH intermediate and suppress the hydrogen evolution reaction, leading to high selectivity and Faradaic efficiency.     

Unveiling the Activity Origin of a Copper‐based Electrocatalyst for Selective Nitrate Reduction to Ammonia

Unveiling the active phase of catalytic materials under reaction conditions is important for the construction of efficient electrocatalysts for selective nitrate reduction to ammonia. The origin of the prominent activity enhancement for CuO (Faradaic efficiency: 95.8 %, Selectivity: 81.2 %) toward selective nitrate electroreduction to ammonia was probed. ¹⁵N isotope labeling experiments showed that ammonia originated from nitrate reduction. ¹H NMR spectroscopy and colorimetric methods were performed to quantify ammonia. In situ Raman and ex situ experiments revealed that CuO was electrochemically converted into Cu/Cu₂O, which serves as an active phase. The combined results of online differential electrochemical mass spectrometry (DEMS) and DFT calculations demonstrated that the electron transfer from Cu₂O to Cu at the interface could facilitate the formation of *NOH intermediate and suppress the hydrogen evolution reaction, leading to high selectivity and Faradaic efficiency.     

Sulfur Changes the Electrochemical CO2 Reduction Pathway over Cu Electrocatalysts

Electrochemical CO₂ reduction to value-added chemicals or fuels offers a promising approach to reduce carbon emissions and alleviate energy shortage. Cu-based electrocatalysts have been widely reported as capable of reducing CO₂ to produce a variety of multicarbon products (e.g., ethylene and ethanol). In this work, we develop sulfur-doped Cu₂O electrocatalysts, which instead can electrochemically reduce CO₂ to almost exclusively formate. We show that a dynamic equilibrium of S exists at the Cu₂O-electrolyte interface, and S-doped Cu₂O undergoes in situ surface reconstruction to generate active S-adsorbed metallic Cu sites during the CO₂ reduction reaction (CO₂RR). Density functional theory (DFT) calculations together with in situ infrared absorption spectroscopy measurements show that the S-adsorbed metallic Cu surface can not only promote the formation of the *OCHO intermediate but also greatly suppress *H and *COOH adsorption, thus facilitating CO₂-to-formate conversion during the electrochemical CO₂RR.     

Charge storage mechanism of copper hexacyanoferrate nanocubes for supercapacitors

The widely accepted theory concerning the electrochemical energy storage mechanism of copper hexacyanoferrate (CuHCF) for supercapacitors is that CuHCF stores charge by the reversible redox processes of Fe³⁺/Fe²⁺ couple and Cu cations are electrochemically inactive. In this work, CuHCF nanocubes (CuHCF-NC) were synthesized in the presence of potassium citrate and its electrochemical properties were tentatively studied in 1 mol/L Na₂SO₄ aqueous electrolyte. Good supercapacitive performance was exhibited. The combined analyses of cyclic voltammogram (CV) and X-ray photoelectron spectroscopy (XPS) disclosed that the CuHCF nanocubes underwent the redox reactions of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ couples to store charges. The Cu²⁺/Cu⁺ redox couple was activated due to the strong coordination interaction between the carboxylate groups of citrate ions and surface Cu cations.     

Post-Nickelation of a Crystalline Trinuclear Copper Organic Framework for Synergistic Photocatalytic Carbon Dioxide Conversion

Rational regulation of electronic structures and functionalities of framework materials still remains challenging. Herein, reaction of 4,4′,4′′-nitrilo-tribenzhydrazide with tris(μ₂-4-carboxaldehyde-pyrazolato-N,N′)-tricopper (Cu₃Py₃) generates the crystalline copper organic framework USTB-11(Cu). Post-modification with divalent nickel ions affords the heterometallic framework USTB-11(Cu,Ni). Powder X-ray diffraction and theoretical simulations reveal their two-dimensional hexagonal structure geometry. A series of advanced spectroscopic techniques disclose the mixed Cu^I/Cu^II state nature of Cu₃Py₃ in USTB-11(Cu,Ni) with a uniform bistable Cu₃⁴⁺(Cu^I₂Cu^II) : Cu₃⁵⁺(Cu^ICu^II₂) (ca. 1 : 3) oxidation state, resulting in a significantly improved formation efficiency of the charge-separation state. This endows the Ni sites with enhanced activity and USTB-11(Cu,Ni) with outstanding photocatalytic CO₂ to CO performance with a conversion rate of 22 130 μmol g⁻¹ h⁻¹ and selectivity of 98 %.     

Ethylbenzene to chemicals: Catalytic conversion of ethylbenzene into styrene over metal-containing MCM-41

Isomorphously substituted (MeDM) and impregnated metal-containing MCM-41 (MeO_x/IM) catalysts, in which Me = Co, Cu, Cr, Fe or Ni, have been prepared. Structural and textural characterizations of the catalysts were performed by means of X-ray diffraction (XRD), chemical analysis, Raman spectroscopy, electron paramagnetic resonance (EPR), N₂ adsorption isotherms and temperature programmed reduction (TPR). Cu²⁺, Co²⁺, and Cr⁴⁺/Cr³⁺ species were found over the catalysts as cations incorporated in the MCM-41 structure (MeDM) or highly dispersed oxides on the surface (MeO_x/IM). The MeDM catalysts exhibited a good performance in the dehydrogenation of ethylbenzene with CO₂. However, MeO_x/IM catalysts had a low performance in styrene production (activity less than 15 × 10^?3 mmol h^?1 and selectivity for styrene less than 80%) due to the high reducibility of the metals species. However, Ni²⁺ or Fe³⁺ coordinated with the MCM-41 framework, as well as NiO_x and Fe₂O₃ extra-framework species, is continuously oxidized by the CO₂ to maintain the active sites for dehydrogenating ethylbenzene. Deactivation studies on the FeDM sample showed that Fe³⁺ species produced active sp² carbon compounds, which are removed by CO₂; the referred sample is catalytically selective for styrene and stable over 24 h of reaction. In contrast, highly active Ni²⁺ and Ni⁰ species produced a large amount of polyaromatic carbonaceous deposits from styrene, as identified by TPO, TG and Raman spectroscopy. An acid–base mechanism is proposed to operate to adsorb ethylbenzene and abstract the β-hydrogen. CO₂ plays a role in furnishing the lattice oxygen to maintain the Fe³⁺ active sites in the dehydrogenation of ethylbenzene to form styrene.     

Electrochemically Driven Cation Exchange Enables the Rational Design of Active CO2 Reduction Electrocatalysts

Metal oxides or sulfides are considered to be one of the most promising CO₂ reduction reaction (CO₂RR) precatalysts, owing to their electrochemical conversion in situ into highly active electrocatalytic species. However, further improvement of the performance requires new tools to gain fine control over the composition of the active species and its structural features [e.g., grain boundaries (GBs) and undercoordinated sites (USs)], directly from a predesigned template material. Herein, we describe a novel electrochemically driven cation exchange (ED‐CE) method that enables the conversion of a predesigned CoS₂ template into a CO₂RR catalyst, Cu₂S. By means of ED‐CE, the final Cu₂S catalyst inherits the original 3 D morphology of CoS₂, and preserves its high density of GBs. Additionally, the catalyst's phase structure, composition, and density of USs were precisely tuned, thus enabling rational design of active CO₂RR sites. The obtained Cu₂S catalyst achieved a CO₂‐to‐formate Faradaic efficiency of over 87 % and a record high activity (among reported Cu‐based catalysts). Hence, this study opens the way for utilization of ED‐CE reactions to design advanced electrocatalysts.     

Cu2O/CuO Electrocatalyst for Electrochemical Reduction of Carbon Dioxide to Methanol

Herein, we report the controlled and direct fabrication of Cu₂O/CuO thin film on the conductive nickel foam using electrodeposition route for the electrochemical reduction of carbon dioxide (CO₂) to methanol. The electrocatalytic reduction was performed in CO₂ saturated aqueous solution consisting of KHCO₃, pyridine and HCl at room temperature. CO₂ reduction was carried out at a constant potential of −1.3 V for 120 min to study the electrochemical performance of the prepared electrocatalysts. Cu₂O/CuO shows better electrocatalytic activity with highest current density of 46 mA/cm². The prepared catalyst can be an efficient and selective electrode for the production of methanol.     

Selective CO2 Electroreduction to Ethylene and Multicarbon Alcohols via Electrolyte‐Driven Nanostructuring

Production of multicarbon products (C₂₊) from CO₂ electroreduction reaction (CO₂RR) is highly desirable for storing renewable energy and reducing carbon emission. The electrochemical synthesis of CO₂RR catalysts that are highly selective for C₂₊ products via electrolyte‐driven nanostructuring is presented. Nanostructured Cu catalysts synthesized in the presence of specific anions selectively convert CO₂ into ethylene and multicarbon alcohols in aqueous 0.1 m KHCO₃ solution, with the iodine‐modified catalyst displaying the highest Faradaic efficiency of 80 % and a partial geometric current density of ca. 31.2 mA cm^?2 for C₂₊ products at ?0.9 V vs. RHE. Operando X‐ray absorption spectroscopy and quasi in situ X‐ray photoelectron spectroscopy measurements revealed that the high C₂₊ selectivity of these nanostructured Cu catalysts can be attributed to the highly roughened surface morphology induced by the synthesis, presence of subsurface oxygen and Cu⁺ species, and the adsorbed halides.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Dynamic Changes in the Structure,Chemical State and Catalytic Selectivity of Cu Nanocubes during CO2 Electroreduction: Size and Support Effects

In situ and operando spectroscopic and microscopic methods were used to gain insight into the correlation between the structure, chemical state, and reactivity of size‐ and shape‐controlled ligand‐free Cu nanocubes during CO₂ electroreduction (CO₂RR). Dynamic changes in the morphology and composition of Cu cubes supported on carbon were monitored under potential control through electrochemical atomic force microscopy, X‐ray absorption fine‐structure spectroscopy and X‐ray photoelectron spectroscopy. Under reaction conditions, the roughening of the nanocube surface, disappearance of the (100) facets, formation of pores, loss of Cu and reduction of CuO_x species observed were found to lead to a suppression of the selectivity for multi‐carbon products (i.e. C₂H₄ and ethanol) versus CH₄. A comparison with Cu cubes supported on Cu foils revealed an enhanced morphological stability and persistence of Cu^I species under CO₂RR in the former samples. Both factors are held responsible for the higher C₂/C₁ product ratio observed for the Cu cubes/Cu as compared to Cu cubes/C. Our findings highlight the importance of the structure of the active nanocatalyst but also its interaction with the underlying substrate in CO₂RR selectivity.     

Dynamic Changes in the Structure,Chemical State and Catalytic Selectivity of Cu Nanocubes during CO2 Electroreduction: Size and Support Effects

In situ and operando spectroscopic and microscopic methods were used to gain insight into the correlation between the structure, chemical state, and reactivity of size‐ and shape‐controlled ligand‐free Cu nanocubes during CO₂ electroreduction (CO₂RR). Dynamic changes in the morphology and composition of Cu cubes supported on carbon were monitored under potential control through electrochemical atomic force microscopy, X‐ray absorption fine‐structure spectroscopy and X‐ray photoelectron spectroscopy. Under reaction conditions, the roughening of the nanocube surface, disappearance of the (100) facets, formation of pores, loss of Cu and reduction of CuO_x species observed were found to lead to a suppression of the selectivity for multi‐carbon products (i.e. C₂H₄ and ethanol) versus CH₄. A comparison with Cu cubes supported on Cu foils revealed an enhanced morphological stability and persistence of Cu^I species under CO₂RR in the former samples. Both factors are held responsible for the higher C₂/C₁ product ratio observed for the Cu cubes/Cu as compared to Cu cubes/C. Our findings highlight the importance of the structure of the active nanocatalyst but also its interaction with the underlying substrate in CO₂RR selectivity.     

Copper-Sulfur-Nitrogen Cluster Providing a Local Proton for Efficient Carbon Dioxide Photoreduction

Atomically precise Cu clusters are highly desirable as catalysts for CO₂ reduction reaction (CO₂RR), and they provide an appropriate model platform for elaborating their structure–activity relationship. However, an efficient overall photocatalytic CO₂RR with H₂O using assembled Cu-cluster aggregates as single component photocatalyst has not been reported. Herein, we report a stable crystalline Cu−S−N cluster photocatalyst with local protonated N−H groups (denoted as Cu₆−NH ). The catalyst exhibits suitable photocatalytic redox potentials, high structural stability, active catalytic species, and a narrow band gap, which account for its outstanding photocatalytic CO₂RR performance under visible light, with ≈100 % selectivity for CO evolution. Remarkably, systematic isostructural Cu-cluster control experiments, in situ infrared spectroscopy, and density functional theory calculations revealed that the protonated pyrimidine N atoms in the Cu₆−NH cluster act as a proton relay station, providing a local proton during the photocatalytic CO₂RR. This efficiently lowers the energy barrier for the formation of the *COOH intermediate, which is the rate-limiting step, efficiently enhancing the photocatalytic performance. This work lays the foundation for the development of atomically precise metal-cluster-based photocatalysts.     

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO₂ reduction catalysts in a molecular way. The elaborately introduced functional groups (−F, −H and −OMe) can regulate the valance state of Cu^δ+, which is found to be directly scaled with the selectivity of the electrochemical CO₂-to-CH₄ conversion. An optimum CH₄ Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cu^δ+ centers adjusted by the electron-withdrawing group decrease the pK_a of adsorbed H₂O, promoting the hydrogenation of intermediates toward the CH₄ production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.     

Direct Electrochemical Capture and Release of Carbon Dioxide Using an Industrial Organic Pigment: Quinacridone

Limiting anthropogenic carbon dioxide emissions constitutes a major issue faced by scientists today. Herein we report an efficient way of controlled capture and release of carbon dioxide using nature inspired, cheap, abundant and non‐toxic, industrial pigment namely, quinacridone. An electrochemically reduced electrode consisting of a quinacridone thin film (ca. 100 nm thick)on an ITO support forms a quinacridone carbonate salt. The captured CO₂ can be released by electrochemical oxidation. The amount of captured CO₂ was quantified by FT‐IR. The uptake value for electrochemical release process was 4.61 mmol g^?1. This value is among the highest reported uptake efficiencies for electrochemical CO₂ capture. For comparison, the state‐of‐the‐art aqueous amine industrial capture process has an uptake efficiency of ca. 8 mmol g^?1.     

Das Gleichgewicht des Cu2+−Cu+−Cu-systems in konzentrierten Perchloratlösungen

The equilibrium of the reaction Cu²⁺+Cu?2 Cu⁺ has been investigated in cone. solutions of Ca(ClO₄)₂. The apparent equilibrium constants of this reaction and the formal potentials of the Cu²⁺/Cu⁺, Cu²⁺/Cu and Cu⁺/Cu redox systems were determined. From these data the hydration numbers of the Cu²⁺ and Cu⁺ ions were estimated and the scheme of the reaction studied was proposed and discussed. In addition the equilibrium constants of the reaction Cu²⁺+Cu(Hg)?2 Cu⁺ were calculated and discussed.     

Chemically dealloyed Pt–Au–Cu ternary electrocatalysts with enhanced stability in electrochemical oxygen reduction

We report simple synthesis of ternary Pt–Au–Cu catalysts consisting of active Pt-rich shell and Pt transition-metal alloy core for use as highly active and durable electrocatalysts in oxygen reduction reactions. The ternary Pt–Au–Cu catalysts were synthesized by chemical coreduction followed by thermal treatment and chemical dealloying. During synthesis, thermal treatment formed metal particles into high-degree alloys, and chemical dealloying led to selective dissolution of soluble Cu species from the outer surface layer of the thermally treated alloy particles, resulting in Pt-based alloys@Pt-rich surface core–shell configuration. Compared with a commercial Pt/C catalyst, our Pt_1?xAu _x Cu₃/C-AT catalysts exhibited approximately 2.4-fold enhanced performance in oxygen reduction reactions. Among the catalysts employed in this work, Pt_0.97Au_0.3Cu₃/C-AT showed the highest performance in terms of mass activity, specific activity, and electrochemically active surface area loss with negligible change during 10,000 potential cycles. The synthesis details, electrochemical characteristics, oxygen reduction reaction performance, and durability of the chemically dealloyed ternary Pt–Au–Cu catalysts are presented and discussed.     

Methane Oxidation over Cu2+/[CuOH]+ Pairs and Site-Specific Kinetics in Copper Mordenite Revealed by Operando Electron Paramagnetic Resonance and UV/Visible Spectroscopy

Cu-exchanged mordenite (MOR) is a promising material for partial CH₄ oxidation. The structural diversity of Cu species within MOR makes it difficult to identify the active Cu sites and to determine their redox and kinetic properties. In this study, the Cu speciation in Cu-MOR materials with different Cu loadings has been determined using operando electron paramagnetic resonance (EPR) and operando ultraviolet-visible (UV/Vis) spectroscopy as well as in situ photoluminescence (PL) and Fourier-transform infrared (FTIR) spectroscopy. A novel pathway for CH₄ oxidation involving paired [CuOH]⁺ and bare Cu²⁺ species has been identified. The reduction of bare Cu²⁺ ions facilitated by adjacent [CuOH]⁺ demonstrates that the frequently reported assumption of redox-inert Cu²⁺ centers does not generally apply. The measured site-specific reaction kinetics show that dimeric Cu species exhibit a faster reaction rate and a higher apparent activation energy than monomeric Cu²⁺ active sites highlighting their difference in the CH₄ oxidation potential.     

Electrical Pulse-Driven Periodic Self-Repair of Cu-Ni Tandem Catalyst for Efficient Ammonia Synthesis from Nitrate

Electrocatalytic nitrate reduction sustainably produces ammonia and alleviates water pollution, yet is still challenging due to the kinetic mismatch and hydrogen evolution competition. Cu/Cu₂O heterojunction is proven effective to break the rate-determining NO₃⁻-to-NO₂⁻ step for efficient NH₃ conversion, while it is unstable due to electrochemical reconstruction. Here we report a programmable pulsed electrolysis strategy to achieve reliable Cu/Cu₂O structure, where Cu is oxidized to CuO during oxidation pulse, then regenerating Cu/Cu₂O upon reduction. Alloying with Ni further modulates hydrogen adsorption, which transfers from Ni/Ni(OH)₂ to N-containing intermediates on Cu/Cu₂O, promoting NH₃ formation with a high NO₃⁻-to-NH₃ Faraday efficiency (88.0±1.6 %, pH 12) and NH₃ yield rate (583.6±2.4 μmol cm⁻² h⁻¹) under optimal pulsed conditions. This work provides new insights to in situ electrochemically regulate catalysts for NO₃⁻-to-NH₃ conversion.     

Carbon black supported PtCu nanoparticles derived from mix-phased Cu precursor for high-performanced oxygen reduction reaction in acid medium

Alloying high-cost Pt with transition metals has been considered as an effective route to synthesize the electrocatalysts with low Pt loading and excellent activity towards oxygen reduction reaction (ORR) under acid solution. The galvanic replacement method, as featured with efficiency and simplicity, is widely reported to produce Pt-based bimetallic alloys and thereby declare the significance of reductive transition metal precursor on the enhancement of ORR performance. Herein, mix-phased Cu−Cu₂O precursor was applied to prepare carbon black supported highly dispersed PtCu alloy nanoparticles (PtCu/C). The proper Cu−Cu₂O ratios can exactly facilitate the generation of small sized PtCu alloy nanoparticles with regulated bimetallic content. Meanwhile, the Cu₂O phase is revealed to benefit the electron transfer from Pt to Cu and thus improve the intrinsic activity of Pt active sites. And the metallic Cu can favor the promotion of electrochemical active surface area. Consequently, the as-prepared PtCu/C behaves impressive ORR activity with half-wave potential of 0.88 V (vs. RHE) and mass activity of 0.49 A cm⁻² mg_Pt⁻¹ at 0.8 V, which is 9.8 times of commercial Pt/C catalysts. Our work will offer helpful advices for the development and regulation of novel Pt-based alloy materials towards diverse electrocatalysis.