移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

托卡马克中局域磁扰动引起的高能量离子损失研究

基于单粒子导心运动代码ORBIT，采用测试粒子模拟方法，研究了托卡马克等离子体内部不同径向位置处局域磁场扰动对高能量离子的损失的影响。研究表明，在局域磁扰动主要分布在某磁面附近、其环向具有类似纹波场形式下，可造成一些靠近等离子体中心区域的高能量离子损失，但对靠近等离子边界的离子损失影响相对不大。这些损失的高能量离子均为捕获离子，离子的投掷角越大就越容易损失。此外，造成高能量离子最大损失率的局域场径向位置与这些损失离子的初始径向位置通常存在一定的偏移，而且这个偏移与这些离子的能量密切相关。当局域场出现在某些位置时，能量较低的离子会有一定的损失，能量较高的离子反而不会损失。     

DG polynomial algebras and their homological properties

In this paper, we introduce and study differential graded(DG for short) polynomial algebras. In brief, a DG polynomial algebra A is a connected cochain DG algebra such that its underlying graded algebra A~# is a polynomial algebra K[x_1, x_2,..., x_n] with |xi| = 1 for any i ∈ {1, 2,..., n}. We describe all possible differential structures on DG polynomial algebras, compute their DG automorphism groups, study their isomorphism problems, and show that they are all homologically smooth and Gorenstein DG algebras. Furthermore, it is proved that the DG polynomial algebra A is a Calabi-Yau DG algebra when its differential ?_A≠ 0 and the trivial DG polynomial algebra(A, 0) is Calabi-Yau if and only if n is an odd integer.     

耐等离子刻蚀陶瓷的研究现状

等离子刻蚀技术是超大规模集成电路制备工艺中不可或缺加工技术.在半导体晶圆尺寸不断增大以及特征尺寸不断缩少的发展进程中,晶圆的污染问题越来越突出.而刻蚀机腔室材料作为晶圆的主要污染源之一,其耐等离子刻蚀性日益受到人们的关注.本文主要介绍耐等离子体刻蚀腔体材料的特性及目前国内外的研究与发展现状.     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

冷冻干燥辅助溶胶凝胶法合成Li1.2Ni0.2Mn0.6O2正极材料及电化学性能改善研究

采用冷冻干燥辅助溶胶凝胶法合成富锂锰基Li1.2 Ni0.2Mn0.6O2正极材料,并将其结构、形貌以及电化学性能与传统溶胶凝胶法合成的材料进行比较.X射线衍射(XRD)结果表明,通过冷冻干燥辅助溶胶凝胶法合成的Li1.2Ni0.2Mn0.6O2粉末阳离子混排程度更低,冷冻干燥工艺的参与可以改善晶体结构.扫描电镜(SEM)照片分析表明,与溶胶凝胶样品相比较,冷冻干燥辅助溶胶凝胶法合成样品的颗粒团聚程度较低.电化学性能测试结果表明,冷冻干燥辅助溶胶凝胶法合成的材料具有更好的倍率性能和循环性能.除此之外,电化学交流阻抗测试(EIS)结果表明,冷冻干燥辅助溶胶凝胶法合成的Li1.2Ni0.2Mn0.6O2电荷转移电阻低于溶胶凝胶法制备的材料,增强了反应动力学.     

EAST装置上W波段多道极向相关反射仪的研制

在EAST装置上安装了X模极化W波段多道相关反射仪，用于测量等离子体芯部密度涨落。该诊断利用低损耗(<3dB)多工器将4个不同频率(79.2GHz，85.2GHz，91.8GHz和96GHz)的微波耦合在一起，通过同一个天线发射。反射波由两个极向分离(~5cm)的天线接收，通过下变频技术实现外差测量。通过对两个极向天线接收的信号进行相关分析，获得芯部湍流垂直速度。对2018年低约束模式(L模)放电进行分析发现，在电子回旋共振加热(ECRH)等离子体中，芯部湍流垂直速度在电子逆磁漂移方向。而在注入同向中性束(co-NBI)后，芯部湍流垂直速度变为离子逆磁漂移方向。     

某型电动飞机螺旋桨振动特性实验研究

某型电动飞机采用螺旋桨产生拉力,为了防止螺旋桨工作时共振,利用ES-2-150振动实验系统进行了两叶木质螺旋桨和碳纤维螺旋桨的振动特性实验,采用谐振搜索与驻留方法测量出木质螺旋桨的第一阶固有频率为36.07Hz,碳纤维螺旋桨的第一阶固有频率为73.58Hz。螺旋桨爬升状态转频为39Hz,这与木质螺旋桨的第一阶固有频率非常接近,导致木质螺旋桨在爬升状态出现比较严重的振动故障。因此,某型电动飞机最终选择两叶碳纤维螺旋桨作为其拉力产生装置。     

γ-Fe2O3纳米颗粒尺寸及碳化气氛对碳化过程的影响

采用油酸铁热分解法制备出不同尺寸（4-19 nm）的γ-Fe₂O₃纳米颗粒，在350℃下，于5%CO/He、 5%CO/10%H₂/He和5%CO/20%H₂/He的三种气氛中，使用原位XRD反应装置研究了γ-Fe₂O₃纳米颗粒的碳化过程与物相变化规律，同时结合Raman、CO-TPR和TEM等手段对样品进行了表征。结果表明，γ-Fe₂O₃纳米颗粒完全碳化后会形成稳定比例的χ-Fe5C2和θ-Fe₃C的混合相；在相同碳化气氛下，随γ-Fe₂O₃颗粒尺寸增大完全碳化所需时间缩短，尺寸较小的γ-Fe₂O₃颗粒表面残留炭较多，会抑制碳化反应进程，碳化相中θ-Fe₃C相对含量随γ-Fe₂O₃纳米颗粒尺寸增大而增高；相同尺寸的γ-Fe₂     

Efficient Visible-Light-Activated Ultra-Long Room-Temperature Phosphorescence Triggered by Multi-Esterification

The development of ultra-long room-temperature phosphorescence (UL-RTP) in processable amorphous organic materials is highly desirable for applications in flexible displays, anti-counterfeiting, and bio-imaging. However, achieving efficient UL-RTP from amorphous materials remains a challenging task, especially with activation by visible light and a bright afterglow. Here we report a general and rational molecular-design strategy to enable efficient visible-light-excited UL-RTP by multi-esterification of a rigid large-plane phosphorescence core. Notably, multi-esterification minimizes the aggregation-induced quenching and accomplishes a ′four birds with one stone′ possibility in the generation and radiation process of UL-RTP: i) shifting the excitation from ultraviolet light to blue-light through enhancing the transition dipole moment of low-lying singlet-states, ii) facilitating the intersystem crossing process through the incorporation of lone-pair electrons, iii) boosting the decay process of long-lived triplet excitons resulting from a significantly increased transition dipole moment, and iv) reducing the intrinsic triplet nonradiative decay by substitution of high-frequency vibrating hydrogen atoms. All these factors synergistically contribute to the most efficient and stable visible-light-stimulated UL-RTP (lifetime up to 2.01 s and efficiency up to 35.4 % upon excitation at 450 nm) in flexible films using multi-esterified coronene, which allows high-tech applications in single-component time-delayed white light-emitting diodes and information technology based on flashlight-activated afterglow encryption.