Flexible and Epitaxial Metal Oxide Thin Film Growth by Photoreaction Processing for Electrical and Optical Applications

This review summarizes the use of photoreactions that replace conventional heating processes for growing oxide thin films from chemical solutions. In particular, this review outlines key variables in photoreactions that affect epitaxial and polycrystalline thin film growth, including precursor materials, laser wavelength, laser fluence, and carbon. In addition, the features of the photoreaction process that can be controlled at a low temperature by oxygen non-stoichiometry are examined. Likewise, functions that are neither achieved by developing a gradient structure nor controlled by a thermal equilibrium reaction are detailed. Two new concepts are presented, known as photoreaction of nanoparticles (PRNP) and photoreaction of a hybrid solutions (PRHS), in which crystal nuclei are pre-dispersed in a metal–organic compound film. This method has successfully produced flexible phosphor films used as resistor or thermistor electronic components. Finally, thin film growth using different light sources such as flash lamps and femtosecond lasers (fs) is explored.     

Chiral Dinuclear EuIII,TbIII, and YIII Complexes Supported by P-Stereogenic Linear Tetraphosphine Tetraoxide

A P-stereogenic linear tetraphosphine tetraoxide, (R,R)- or (S,S)-dpmppm(=O)₄, was synthesized to prepare C₂ dinuclear M(hfa)₃ complexes (M=Eu, Tb, Y) as the first example of lanthanide(III) complexes with P-chiral multidentate phosphine oxides. The mononuclear M(hfa)₃ complexes (M=Eu, Y) with a P-chiral diphosphine dioxide, tpdpb(=O)₂, were also prepared, and comparison of their photophysical properties for the Eu^III complexes revealed that significant chiral induction from the P-chiral centers arises on the achiral M(hfa)₃ units through intramolecular π-π stacking constraint in the dinuclear system.     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236     

Heterodinuclear M1M2 Complexes (M1=Ni,Pd, Pt; M2=Rh,Ir) Supported by a Tetradentate Phosphine Ligand and Their Application for Hydrosilylation

A new series of cationic heterodinuclear complexes, [M¹M²Cl₂(meso-dpmppp)(RNC)₂]PF₆ (M¹=Ni, M²=Rh, R=^tBu ( 1 a ); M¹=Pd, M²=Rh, R=^tBu ( 2 a ), Xyl ( 2 b ); M¹=Pt, M²=Rh, R=^tBu ( 3 a ), Xyl ( 3 b ); M¹=Pd, M²=Ir, R=^tBu ( 4 a )), supported by a tetradentate phosphine ligand, meso-Ph₂PCH₂P(Ph)(CH₂)₃P(Ph)CH₂PPh₂ (meso-dpmppp), were synthesized by stepwise reactions of meso-dpmppp with NiCl₂ ⋅ 6H₂O or MCl₂(cod) (M=Pd, Pt), forming mononuclear metalloligands of [M¹Cl₂(meso-dpmppp)], and with [M²Cl(cod)]₂ (M²=Rh, Ir) and RNC (R=^tBu, Xyl) in the presence of [NH₄][PF₆]. The related neutral PdRh complex, [PdRhCl₃(meso-dpmppp)(XylNC)] ( 5 ), was also prepared. The structures of 1 – 5 were determined by X-ray analyses to contain two square planar d⁸ metal centers with face-to-face arrangement, where meso-dpmppp supports M¹ and M² metal ions in cis/trans-P,P coordination mode, combining cis-{M¹P₂Cl₂} and trans-{M²P₂(CNR)₂} units. Complexes 1 – 4 showed an intence characteristic absorption around 422–464 nm derived from Rh^I→RNC MLCT transition (HOMO→LUMO+1), which are influenced by changing M¹ (Ni^II, Pd^II, Pt^II) metal ions since HOMO composed of dσ* orbitals appreciably destabilized by changing M¹ from Ni to Pd, and Pt. The electronic structures of 1 a – 4 a were investigated on the basis of DFT calculations and NBO analyses to show weak but noticeable d⁸–d⁸ metallophilic interaction as empirical dispersion energy of 0.9–1.5 kcal/mol without M¹–M² covalent bonding interaction. In addition, 1 – 5 were utilized as catalysts for hydrosilylation of styrene, and the NiRh complex 1 a was found to show higher activity and chemo- and regioselectivity compared with 2 – 5 .     

Kinetic study on solute permeation at the interface of molecular aggregates by partial filling capillary electrophoresis

Moment analysis method using partial filling CE was developed for the kinetic study on solute permeation at the interface of spherical molecular aggregates. Moment equations for partial filling CE were developed by classifying CE systems into five categories according to the migration velocities of solute and molecular aggregate. The method was applied to the study on the dissolution of electrically neutral solutes into SDS micelles. Elution peaks were measured by partial filling CE while changing the concentration of SDS and the filling ratio of SDS micellar zone to the capillary (ϕ_M). Partition equilibrium constants (K_p) and rate constants of interfacial solute permeation of SDS micelles (k_in and k_out) were determined from the first absolute and second central moments of the elution peaks by using the moment equations. Their values were comparable irrespective of ϕ_M and were almost the same as those previously measured by complete filling CE. The positive correlation of K_p with the hydrophobicity of the solutes was explained in terms of the change in k_in and k_out. It was demonstrated that the moment analysis method using partial filling CE is effective for studying solute permeation kinetics at the interface of spherical molecular aggregates.     

Production of Alkyl Aryl Sulfides from Aromatic Disulfides and Alkyl Carboxylates via a Disilathiane–Disulfide Interchange Reaction

The results of this study show that disilathiane is an effective mediator in the synthesis of alkyl aryl sulfides with disulfides and alkyl carboxylates. Mechanistic studies suggest that disilathiane promotes cleavage of the sulfur–sulfur bond of disulfides to generate thiosilane as a key intermediate. Diselenides were also applicable to this transformation to produce the corresponding selenides.     

One‐Step Borylation of 1,3‐Diaryloxybenzenes Towards Efficient Materials for Organic Light‐Emitting Diodes

The development of a one‐step borylation of 1,3‐diaryloxybenzenes, yielding novel boron‐containing polycyclic aromatic compounds, is reported. The resulting boron‐containing compounds possess high singlet‐triplet excitation energies as a result of localized frontier molecular orbitals induced by boron and oxygen. Using these compounds as a host material, we successfully prepared phosphorescent organic light‐emitting diodes exhibiting high efficiency and adequate lifetimes. Moreover, using the present one‐step borylation, we succeeded in the synthesis of an efficient, thermally activated delayed fluorescence emitter and boron‐fused benzo[6]helicene.