Solvent Influence on Absorption Spectra and Tautomeric Equilibria of Symmetric Azomethine-Functionalized Derivatives: Structural Elucidation and Computational Studies

A new series of azomethine-functionalized compounds was synthesized from the condensation of 2-hydroxy-1,3-propanediamine and 2-thienylcarboxaldehydes in the presence of a drying agent. The derivatives were spectroscopically characterized by NMR, LC-MS, UV/Vis, IR and elemental analysis. Variable temperature ¹H-NMR (−60 to +60 °C) was performed to investigate the effect of solvent polarity; the capability of solvent to form H-bond was found to dramatically influencing the tautomerization process of the desired structures. The calculated thermochemical parameters (ΔH₂₉₈, ΔG₂₉₈ and ΔS₂₉₈) at DFT and MP2 levels of theory explained that 3 b exists in equilibrium with two tautomers. The basis of the electronic absorptions was pursued through Time-Dependent Density-Functional Theory (TD-DFT). Analysis of the structural surfaces was inspected and the molecular electrostatic potential (MEP) demonstrated that the three functionalized compounds were relatively analogous in the electronic distributions. Furthermore, the electrophilic and nucleophilic centers lying on the molecular surfaces were probably playing a key-role in stabilizing the compounds through the nonclassical C−H⋅⋅⋅π interactions and hydrogen bonding. The impact of solvent polarity on absorption spectra were investigated via solvatochromic shifts. For instance, compound 3 c displayed a gradual shift of the maximum absorption to the red area when the solvent polarity was increased, recording a 21 nm of bathochromic shift. In contrast, no significant solvent-effect on 3 a and 3 b was observed. The solvation relation was pursued between Gutmann's donicity numbers the experimental λ_max; exhibited almost positive linear performance with a minor oscillation, that ascribe to the possible weak interface between the molecules of solute and designated solvents. The bandgap energy of all products were assessed experimentally using optical absorption spectra following Tauc approach, giving −4.050 ( 3 a ), −3.900 ( 3 b ) and −3.210 ( 3 c ) eV. However, the ΔE were computationally figured out from TD-DFT simulation to be −4.258 ( 3 a ), −4.022 ( 3 b ) and −3.390 ( 3 c ) eV.     

Using Raman Spectroscopy to Investigate the Molecular Level Characteristics of Endometriosis

Optics and Spectroscopy - Endometriosis is a benign gynecologic disorder. It is particularly common among young women and may make pregnancy difficult. In this study molecular level...     

A Heroin Epidemic Model: Very General Non Linear Incidence,Treat-Age,and Global Stability

The aim of this work is to establish the existence of multi-peak solutions for the following class of quasilinear problems

$$ - \mbox{div} \bigl(\epsilon^{2}\phi\bigl(\epsilon|\nabla u|\bigr)\nabla u \bigr) + V(x)\phi\bigl(\vert u\vert\bigr)u = f(u)\quad\mbox{in } \mathbb{R}^{N}, $$

where \(\epsilon\) is a positive parameter, \(N\geq2\), \(V\), \(f\) are continuous functions satisfying some technical conditions and \(\phi\) is a \(C^{1}\)-function.

     

Electrochemical Detection of a Cancer Biomarker mir‐21 in Cell Lysates Using Graphene Modified Sensors

In the present study, the voltammetric and impidimetric detection of microRNA‐21, mir‐21 from cell lysates was investigated for the first time by using graphene modified disposable pencil graphite electrodes (GME). The surface characterization of GME was performed via electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Upon passive adsorption of inosine substituted antimicroRNA‐21, antimir‐21 probe, InP, onto the surface of GME and then solid phase hybridization of InP with mir‐21, the target, the electrochemical detection was performed by using Differential Pulse Voltammetry (DPV) and EIS techniques. This developed biosensor, GME has presented a 2.77 times lower detection limit of 2.09 µg/mL (3.12 pmol) with respect to unmodified pencil graphite electrode (GE). Moreover it is capable of analyzing mir‐21 in the cell lysates of mir‐21 positive breast cancer cell line (MCF‐7) contrast to mir‐21 negative hepatoma cell line (HUH‐7). The proposed electrochemical yes‐no system does not require any purification and/or amplification step prior to fast detection of mir‐21 from real samples.     

Electrical and photoelectrical behaviour of heterojunctions based on novel oligomeric metal complexes

Naringenin‐based Schiff base ligands with 4‐aminobenzoic hydrazide were obtained as a unilateral form ( L¹ ). The ligand was oligomerized by oxidative polycondensation reaction with NaOCl as an oxidant in an aqueous alkaline medium at 90 °C to form a functional oligomer ( L² ), and its transition metal complexes such as those with Cu(II), Ni(II) and Zn(II) were prepared. The monomer and the oligomeric compounds were characterized using various techniques. Optical and electrical properties of the complexes were also investigated. All compounds showed indirect band gaps and they can be accepted as being in the semiconductor class. Organic–inorganic hybrid devices were obtained using n‐Si inorganic semiconductor and the complexes. The characteristic parameters of the devices were determined using current–voltage (I–V) and capacitance–voltage measurements in the dark. Photoelectrical properties of the devices were investigated using I–V measurements under a solar simulator with an AM1.5 global filter. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis, thermal stability, electronic features, and antimicrobial activity of phenolic azo dyes and their Ni(II) and Cu(II) complexes

Four water soluble azo dyes, 4-(isopropyl)-2-[(E)-(4-chlorophenyl)diazenyl]phenol (L ¹), 4-(isopropyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L²), 4-(sec-butyl)-2-[(E)-(4-chlorophenyl) diazenyl]phenol (L ³), 4-(sec-butyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L ⁴), and their Cu(II) and Ni(II) complexes were synthesized and characterized using spectroscopic methods. Examination of their thermal stability revealed similar decomposition temperature of approximately 260–300°C and that they were more thermally stable than their metal complexes. Ni(II) complexes of ligands L² and L⁴ were more stable than the other coordination compounds. Among the synthesized ligands, L² and the complexes Cu(L³)₂ and Ni(L⁴)₂ showed both antimicrobial and antifungal activity. However, the other ligands and the complexes were poorly active against selected microorganisms.     

Thermal computations of temperature distribution and bulb heat transfer in an automobile headlamp

In this study, experimental and numerical analysis was performed to define thermal deformation inside the head lamp because of usage plastic materials and thermal loads. Buoyancy, radiation and conjugate effects were considered. Velocity and temperature distributions were obtained and possible hot points and condense regions can be determined. Nusselt number distribution on cylindrical bulb were computed and compared with literature. Relatively important heat transfer increase in natural convection was found.     

An Investigation of the Seismic Behaviour of an Ancient Masonry Bastion Using Non-Destructive and Numerical Methods

Determining the structural behavior of masonry structures is a challenge due to their lack of homogeneity. The seismic behavior of masonry structures is especially complex. The aim of this study was to examine the structural behavior of Za?anos Bastion using both experimental and numerical methods. The Operational Modal Analysis technique, including the Enhanced Frequency Domain Decomposition Method, and the Stochastic Subspace Identification Method were used to illustrate experimentally the dynamic characteristic of the bastion. A finite element model was developed using ANSYS software in order that the dynamic characteristics of the bastion, including natural frequencies and mode shapes, could be calculated numerically. Seismic analysis was carried out using the 1999 Kocaeli earthquake ground motion record to determine the linear and nonlinear seismic behavior of the bastion. The Turkish Earthquake Code and its general technical specifications were used to evaluate the seismic results. The results show that the maximum and minimum principal stresses exerted on the masonry components exceeded the code requirements at some points, but in general the requirements for the stresses were satisfied.     

Defect Chemistry of Singly and Doubly Doped Ceria: Correlation between Ion Transport and Energetics

Earlier studies have shown a strong correlation between the enthalpy of formation, ΔH_f,ox, and the ionic conductivity, σ_i, near room temperature in doped ceria systems, which are promising solid electrolytes for intermediate‐temperature solid oxide fuel cells (IT‐SOFCs). The present work demonstrates that this correlation holds at the operating temperature of IT‐SOFCs, 600–700 °C. Solid solutions of Ce_1?xNd_xO_2?0.5x, Ce_1?xSm_xO_2?0.5x, and Ce_1?xSm_0.5xNd_0.5xO_2?0.5x are studied. The ΔH_f,ox at 702 °C is determined by considering the excess heat content between 25 and 702 °C combined with the value of ΔH_f,ox at 25 °C. Both σ_i and ΔH_f,ox show maxima at x=0.15 and 0.20 for the singly and doubly doped ceria, respectively, suggesting that the number of mobile oxygen vacancies in these solid solutions reaches a maximum near those compositions. An increase in temperature results in a shift of the maximum in both ΔH_f,ox and σ_i towards higher concentrations. This shift results from a gradual increase in dissociation of the defect associates.     

Amperometric biosensors based on deposition of gold and platinum nanoparticles on polyvinylferrocene modified electrode for xanthine detection

In this study, new xanthine biosensors, XO/Au/PVF/Pt and XO/Pt/PVF/Pt, based on electroless deposition of gold(Au) and platinum(Pt) nanoparticles on polyvinylferrocene(PVF) coated Pt electrode for detection of xanthine were presented. The amperometric responses of the enzyme electrodes were measured at the constant potential, which was due to the electrooxidation of enzymatically produced H₂O₂. Compared with XO/PVF/Pt electrode, XO/Au/PVF/Pt and XO/Pt/PVF/Pt exhibited excellent electrocatalytic activity towards the oxidation of the analyte. Effect of Au and Pt nanoparticles was investigated by monitoring the response currents at the different deposition times and the different concentrations of KAuCl₄ and PtBr₂. Under the optimal conditions, the calibration curves of XO/Au/PVF/Pt and XO/Pt/PVF/Pt were obtained over the range of 2.5 × 10^?3 to 0.56 mM and 2.0 × 10^?3 to 0.66 mM, respectively. The detection limits were 7.5 × 10^?4 mM for XO/Au/PVF/Pt and 6.0 × 10^?4 mM for XO/Pt/PVF/Pt. The effects of interferents, the operational and the storage stabilities of the biosensors and the applicabilities of the proposed biosensors to the drug samples analysis were also evaluated.