Graphene Oxide Modified Chemically Activated Graphite Electrodes for Detection of microRNA

In our study, graphene oxide (GO) modified graphite electrodes were used for sensitive and selective impedimetric detection of miRNA. After chemical activation of pencil graphite electrode (PGE) surface using covalent agents (CA), GO modification was performed at the surface of chemically activated PGE. Then, CA‐GO‐PGEs were applied for impedimetric miRNA detection. The microscopic and electrochemical characterization of CA‐GO‐PGEs was performed by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The optimization of experimental conditions; such as GO concentration, DNA probe concentration and miRNA target concentration was performed by using EIS technique. After the hybridization occurred between miRNA‐34a RNA target and its complementary DNA probe, the hybrid was immobilized onto the surface of CA‐GO‐PGEs. Then, the impedimetric detection of miRNA‐DNA hybridization was performed by EIS. The selectivity of our assay was also tested under the optimum experimental conditions.     

Ionic Liquid Modified Single‐use Electrode Developed for Voltammetric Detection of miRNA‐34a and its Application to Real Samples

The ionic liquid (IL) modified chemically activated (CA) pencil graphite electrodes (PGEs) were developed for label‐free voltammetric detection of miRNA‐34a, and implemented to the real samples. Firstly, the electrochemical characterization of unmodified PGE, CA‐PGE, IL‐PGE and IL‐CA‐PGE was performed by cyclic voltammetry (CV) as well as their DNA binding capacity was studied by electrochemical impedance spectroscopy (EIS) technique. The microscopic characterization of the surface of each electrodes was investigated by scanning electron microscopy (SEM). Differential pulse voltammetry (DPV) technique was used for measuring the oxidation signal of guanine in order to perform a label‐free voltammetric monitoring of a full‐match hybridization specific to miRNA‐34a. The selectivity of biosensor was tested against to miRNA‐155, miRNA‐660 as well as to the mismatch sequence of miRNA‐34a. The further selectivity of this proposed biosensor was studied in the mixture of samples containing miRNA‐34a with other miRNAs (1 : 1). The voltammetric detection of miRNA‐34a was also explored in the artificial serum medium as fetal bovine serum (FBS) and also in total RNA samples isolated from HUH‐7 human hepatocellular carcinoma cell line.     

Open‐circuit Electrochemical Polymerization for the Sensitive Detection of Phenols

We report on a novel electrochemical method for electro‐polymerizing phenols under open‐circuit conditions. The method developed here is simple, sensitive, rapid, and overcomes the well‐documented surface fouling of carbon electrodes by phenols. A pre‐charged disposable graphite pencil electrode (pCGPE) was found to be useful for both phenol sampling and sensing. The pCGPE was prepared by charging the surface of a graphite pencil electrode by applying a cyclic voltammetry electrochemical treatment in a NaOH solution. Phenol sampling was accomplished by immersing the pCGPE into a phenol solution. This method permitted phenol detection with a detection limit of 4.17 nM (0.39 ppt).     

Carbon Nanotubes Modified Graphite Electrodes for Monitoring of Biointeraction Between 6‐Thioguanine and DNA

In this present study, single‐walled carbon nanotubes (SWCNT) modified disposable pencil graphite electrodes (SWCNT‐PGEs) were developed for the electrochemical monitoring of anticancer drug, and its interaction with double stranded DNA (dsDNA). Under this aim, SWCNT‐PGEs were applied for the first time in the literature to analyse of 6‐Thioguanine (6‐TG), and also to investigate its interaction with DNA by voltammetric and impedimetric methods. The surface morphologies of PGE and SWCNT‐PGE were explored using scanning electron microscopy (SEM) and electrochemical characterization of unmodified/modified electrodes was performed by cyclic voltammetry (CV). Experimental parameters; such as, the concentration of 6‐TG and its interaction time with dsDNA were optimized by using differential pulse voltammetry (DPV). Additionally, the interaction of 6‐TG with dsDNA was studied in case of different interaction times by electrochemical impedance spectroscopy (EIS) in contrast to voltammetric results. The detection limit of 6‐TG was found to be 0.25 μM by SWCNT‐PGE.     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

Carbon nanotube-chitosan modified disposable pencil graphite electrode for vitamin B12 analysis

A single walled carbon nanotube-chitosan (SWCNT-chitosan) modified disposable pencil graphite electrode (PGE) was used in this study for the electrochemical detection of Vitamin B(12). Electrochemical behaviors of SWCNT-chitosan PGE and chitosan modified PGE were compared by using cyclic voltammetry (CV), square-wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) techniques. SWCNT-chitosan modified electrode was also used for the quantification of Vitamin B(12) in pharmaceutical products. The results show that this electrode system is suitable for sensitive Vitamin B(12) analysis giving good recovery results. The surface morphologies of the SWCNT-chitosan PGE, chitosan modified PGE and unmodified PGE were characterized by using scanning electron microscopy (SEM).     

Voltammetric and Impedimetric Detection of Interaction Between Dacarbazine and Nucleic Acids

Dacarbazine (DTIC) is a chemotherapy drug that is used for the treatment of Hodgkin's lymphoma, malignant melanoma, childhood solid tumors and soft tissue sarcoma. The surface confined interaction between DTIC and nucleic acids was investigated for the first time in this study by using both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) in combination with disposable pencil graphite electrodes. The oxidation signals of DTIC and guanine were measured before and after interaction process using DPV technique. The interaction of DTIC with nucleic acids; poly[A], poly[G], or double stranded of poly[A]‐poly[T] and poly[G]‐poly[C] was also examined using DPV. Furthermore, EIS technique was utilized for detection of the interaction between DTIC and nucleic acids; ssDNA/dsDNA, poly[A], poly[G], or double stranded poly[A]‐poly[T] and poly[G]‐poly[C].     

Impedimetric Aptasensor Based on Disposable Graphite Electrodes Developed for Thrombin Detection

The impedimetric aptasensor for Thrombin (THR) was developed for the first time herein by measuring changes at the charge‐transfer resistance, R_ct upon to protein? aptamer complex formation. After covalent activation of pencil graphite electrode (PGE) surface using covalent agents, amino linked aptamer (APT) was immobilized onto activated PGE surface. Then APT‐THR interaction was explored by electrochemical impedance spectroscopy (EIS). After the optimization of experimental conditions (e.g., APT and THR concentration, immobilization and interaction times), the selectivity of impedimetric aptasensor was tested in the presence of other biomolecules: factor Va and bovine serum albumine (BSA) both in buffer media, or in diluted fetal bovine serum (FBS).     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Electrocatalytic Investigations of Cu(II) and Fe(III) Complexes of Salophen Derivative Schiff Bases on the Pencil Graphite Electrode

This present study describes a pencil graphite electrode surface covered with Cu(II) and Fe(III) complexes based on Salophen derivative Schiff bases in acetonitrile solution containing LiClO₄ as a supporting electrolyte. Cyclic voltammetry method was used for the surface modification procedure with 25 cycle at a sweep rate of 50 mV s^?1. Some characterization methods were used to identify of the prepared modified surfaces including cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), Ultraviolet‐visible Spectroscopy (UV‐Vis), and Scanning Electron Microscopy/Energy Dispersive X‐ray Spectroscopy (SEM/SEM‐EDX). The catalytic activity of these modified surfaces on the electrochemical oxidation of catechol (CC) was investigated and they compared with each other. The results demonstrated that these modified electrodes showed perfect electrocatalytic activity on the catechol determination, however the modified electrode prepared with the Cu(II) complex has higher catalytic activity than this prepared with the Fe(III) complex thanks to its the lower detection limit.     

An Electrochemical DNA Biosensor for the Detection of the Apa I Polymorphism in the Vitamin D Receptor Gene Using Meldola's Blue as a Hybridization Indicator

Electrochemical detection of nucleic acid base mismatches related to Apa I single nucleotide polymorphism (SNP) in the vitamin D receptor gene was performed successfully using 7‐dimethyl‐amino‐1,2‐benzophenoxazinium salt (Meldola's blue, MDB) with 10.9 pmol/100 μL of detection limit. MDB reduction signals obtained from probe, mismatch(probe‐SNP containing target) and hybrid(probe‐target) modified pencil graphite electrode(PGE) increased respectively. The sensor was able to clearly distinguish perfect match from mismatch DNA in a 30 min. detection time. Several factors affecting on the hybridization and indicator response are studied to maximize sensitivity and selectivity. The advantages of the biosensor are discussed in comparison with previous electrochemical assays for DNA hybridization.     

Detection of Human Interleukine‐2 Gene Using a Label‐Free Electrochemical DNA Hybridization Biosensor on the Basis of a Non‐Inosine Substituted Probe

The human interleukine‐2 gene (hIL‐2) is detected with a label‐free DNA hybridization biosensor using a non‐inosine substituted probe. The sensor relies on the immobilization of a 20‐mer antisense single strand oligonucleotide (chIL‐2) related to the human interleukine‐2 gene on the pencil graphite electrode (PGE) as a probe. The guanine oxidation signal was monitored using anodic differential pulse voltammetry (ADPV). The electrochemical pretreatment of the polished PGE at 1.80 V for 5 min is suggested. Then, 5 min immobilization at 0.50 V was found as the optimum condition for immobilization of the probe. The electrochemical detection of hybridization between chIL‐2 and hIL‐2 as a target was accomplished. The selectivity of the biosensor was studied using noncomplementary oligonucleotides. Diagnostic performance of the biosensor is described and the detection limit is found 36 pg/μL.     

Multiwalled Carbon Nanotubes‐Chitosan Modified Single‐Use Biosensors for Electrochemical Monitoring of Drug‐DNA Interactions

A multiwalled carbon nanotubes (CNT)‐chitosan (CHIT) modified pencil graphite electrode (CNT‐CHIT/PGE) was developed for the first time herein for electrochemical monitoring of the interaction of an anticancer drug, mitomycin C (MC) and DNA. The characterization of unmodified PGE, CHIT/PGE, CNT/PGE and CHIT‐CNT/PGE were performed by scanning electron microscopy and cyclic voltammetry techniques. The oxidation signals of MC and guanine were measured before and after interaction at the surface of CNT‐CHIT/PGEs using differential pulse voltammetry. Electrochemical impedance spectroscopy technique was also successfully utilized for monitoring of the interaction process at the surface of CNT‐CHIT/PGEs in different interaction times.     

Application of Single‐use Electrode Based on Nano‐clay and MWCNT for Simultaneous Determination of Acetaminophen,Ascorbic Acid and Acetylsalicylic Acid in Pharmaceutical Dosage

In this study, a highly sensitive, selective and cost‐effective electrochemical nano‐sensor has been developed for the first time so as to facilitate the simultaneous and low‐level detection of acetaminophen (paracetamol, PAR), ascorbic acid (A) and acetylsalicylic acid (ASA) ternary mixture. The sensor is based on nano‐sepiolite clay (SEP) with multiwall carbon nanotubes (MWCNTs) onto electrochemically pretreated pencil graphite electrode (pPGE). The surface properties of the sensor were examined by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) techniques. The pH effect, composition of modifiers, immobilization time, deposition potential and deposition time values were optimized to reach the best response of PAR, A and ASA. Moreover, in optimum analytical conditions, adsorptive stripping differential pulse voltammmetric (AdsDPV) method was developed for the simultaneous analysis of the ternary mixtures concerned by using SEP/MWCNTs/pPGE sensor. This sensor exhibited the low detection limits of 0.018, 0.042 and 0.047 μM for PAR, A and ASA ternary mixture, respectively. The developed AdsDPV method was applied for quantitative determination of PAR, A and ASA in the pharmaceutical formulation. The recovery experiments were carried out to control the accuracy and precision of the method. The obtained voltammetric recoveries were comparable with the HPLC data given in the literature.     

Electrochemical Behavior of MCF‐7 Cells on Carbon Nanotube Modified Electrode and Application in Evaluating the Effect of 5‐Fluorouracil

The electrochemical behavior of human breast cancer cells (MCF‐7) suspension on multiwalled carbon nanotube (MWCNT) modified graphite electrode was studied by using cyclic voltammetry (CV) and potentiometric stripping analysis (PSA). Compared with bare graphite electrode, the MWCNTs‐modified electrode showed electrocatalytic property to the oxidation of electroactive species in the cell suspension. One oxidative peak at about +0.74 V was observed in the cyclic voltammogram. PSA was proved to be more sensitive than CV for investigation of the electrochemical behavior of cells. And it was found that ultrasonication treatment of the cell suspension can significantly enhance the PSA signal. Factors influencing the PSA signal of cells, including deposition time, deposition potential and stripping current, were investigated in detail and the optimum conditions were obtained. The baseline corrected PSA signal was found to be related to the viability of cells and the technique was used for monitoring the growth of MCF‐7 cells. The effect of anticancer drug 5‐fluorouracil (5‐FU) on the growth of MCF‐7 cells was also investigated by PSA.     

Interaction of Mitomycin C with DNA Immobilized onto Single‐walled Carbon Nanotube/Polymer Modified Pencil Graphite Electrode

The electrochemical investigation of the interaction between the anticancer drug mitomycin C (MC) and DNA was described using a single‐walled carbon nanotube (SWCNT)/poly(vinylferrocenium) (PVF⁺) modified pencil graphite electrode (PGE). The electrochemical oxidation signals of guanine were monitored before and after the interaction between MC and DNA by using differential pulse voltammetry. The effects of DNA and MC concentration and MC interaction time were examined based on the electrode response. Cyclic voltammetry and electrochemical impedance spectroscopy were used for the characterization of SWCNT/PVF⁺ modified and PVF⁺ modified PGEs. The detection limit corresponded to 625 ng/mL for MC using calf thymus double‐stranded DNA immobilized SWCNT/PVF⁺ modified PGE.     

Electroactivated Disposable Pencil Graphite Electrode – New,Cost-effective,and Sensitive Electrochemical Detection of Bioflavonoid Hesperidin

In this paper, for the first time, electroactivated disposable pencil graphite electrode (ePGE) was used for the detection of bioflavonoid hesperidin with cyclic and differential pulse voltammetry. The electroactivation efficiency of the pencil graphite electrode (PGE) was examined employing electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) and the enhancement of electron transfer kinetics of the PGE after the electroactivation was found. Hesperidin is irreversibly oxidized on the ePGE and its oxidation was the most pronounced at pH=5.0. Two electrode processes were detected, on one hand, a mixed diffusion and adsorption control was observed for the first electrode process. On the other hand, only diffusion control was observed in the second electrode process. Linear dependence between the peak current and the hesperidin concentration was obtained in the concentration range from 5×10⁻⁷ mol dm⁻³ to 1×10⁻⁵ mol dm⁻³ and the determined lower limit of detection (LOD) was 2×10⁻⁷ mol dm⁻³. Moreover, hesperidin in pharmaceutical formulation (containing active substance, hesperidin, and excipients) was quantified using ePGE. A good correlation was obtained between experimentally obtained hesperidin concentration by voltammetric analysis and concentration determined by standard HPLC technique (R²=0.9462).     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

Application of Impedimetric and Voltammetric Genosensor for Detection of a Biological Warfare: Anthrax

A strategy for the detection of anthrax, which is a potential biological weapon by using an electrochemical genosensing technology, is investigated. An alkanathiol‐linked or unlabeled capture probe related to B. anthracis is immobilized onto gold or graphite electrode surface. A 101‐mer anthrax target is used for hybridization. The extent of hybridization between probe and target sequences is determined by using differential pulse voltammetry (DPV) and electrochemical impedance spectrometry (EIS). EIS analysis are based on electron transfer resistance (R_ct) in the presence of [Fe(CN)₆]^3?/4? and DPV measurements are based on transduction of both guanine oxidation and Meldola's blue (MDB) reduction signal as hybridization indicator. The response of the probe‐modified electrodes which was interacted with a noncomplementary sequence was the same as the responses of probe‐modified surface and proved the specifity of the hybridization with the target. According to these results the developed genosensors based on EIS and DPV techniques can be employed for rapid and selective detection of B. anthracis.     

Voltammetry of Benzo[a]pyrene in Aqueous and Nonaqueous Media: Adsorptive Stripping Voltammetric Determination at Pencil Graphite Electrode

A detailed study of the electrochemical oxidation of Benzo[a]pyrene (BaP) at the glassy carbon and pencil graphite electrodes was carried out in aqueous and nonaqueous media. Using square‐wave stripping mode, the compound yielded a well‐defined voltammetric response at pencil graphite electrode in acetate buffer, pH 4.8 at +1.13 V (vs. Ag/AgCl) (a preconcentration step being carried out at a fixed potential of +0.70 V for 180 s). The process could be used to determine BaP concentrations in the range 0.25–1.25 μM, with a detection limit of 0.027 μM (6.82 μg L^?1). The applicability to assay of spiked human urine samples was also illustrated.