Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

The Determination of Protonation Constants of Some Amino Acids and Their Esters by Potentiometry in Different Media

In this study, stoichiometric protonation constants of L-tyrosine, L-cysteine, L-tryptophane, L-lysine, and L-histidine, and their methyl and ethyl esters in water and ethanol–water mixtures of 30, 50, and 70% ethanol (v/v), were determined potentiometrically using a combined pH electrode system calibrated as the concentration of hydrogen ion. Titrations were performed at 25^∘C and the ionic strength of the medium was maintained at 0.10 mol⋅L⁻¹ using sodium chloride. Protonation constants were calculated by using the BEST computer program. The effect of solvent composition on the protonation constants is discussed. The log₁₀ K₂ values of esters generally decreased with increasing ethanol content. However, the log₁₀ K₁ values of the esters of L-tyrosine, L-cysteine, and L-tryptophane were found to increase with increasing ethanol content in contrast those of L-lysine and L-histidine esters.     

AGSM光束在自由空间中的传输

 用矩阵方法研究了有扭曲的各向异性高斯-尔模型（AGSM）光束通过自由空间的传输。给出了光束参数的解析传输公式和详细数值计算结果，说明AGSM光束的传输特性以及扭曲因子和空间相关长度的影响。     

White and Red Organic Light Emitting Materials

Derivatives of 2,3-(1,4-dialkoxyaceno)norbornadiene underwent ring-opening metathesis polymerization (ROMP) upon the catalysis of a ruthenium complex to afford the corresponding polymers. The polymeric materials containing anthracene chromophores emit white electro-luminescence, which can be fabricated into light-emitting diodes (LED). The broad emission band is composed of a blue emission from anthracene and a red emission from aggregates. A single layer device, ITO/polymer/Ca/Al, can be turned on at 7V and exhibits maximum intensity 427 cd/m2 at 15 V. A double layer device, ITO/polymer/TPBI/Mg:Ag (TPBI = (2,2′,2"-(1,3,5-benzenetriyl)-tris(1-phenyl-1H-benzimidazole)) displayed blue light with turn-on voltage 6 V and maximal intensity 930 cd/m2 at 15 V.Derivatives of bisindolylmaleimide were found to form amorphous solid films which exhibit intensive red luminescence. The property of forming glasses can be ascribed to the nonplanar geometry of these molecules. LED devices were fabricated by a layer of pure dye sandwiched between two charge transporting films. The yellow emission spectrum of the devices utilizing Alq (tris(8-hydoxyquinolinato)aluminum) contains a green component from Alq. Pure red emissions can be achieved by replacing Alq with TPBI. Typical devices can be turned on at ～3 V with maximal intensity 2000 cd/m2. White color devices are under current investigation, in which the green Alq layer is replaced by its blue derivative (bis(2-methyl-8-hydoxyquinolinato)(phenolato)aluminum).     

Tesla变压器型电子束加速器初步实验

 介绍了一种Tesla变压器型的强流电子束加速器。当变压器初级输入20kV左右的电压时，加速器二极管输出电压500kV，电流9kA，信号脉宽大约50ns，该装置具有结构简单，安装方便，运行可靠等特点。     

On upper and lower D*-supercontinuous multifunctions

We define a multifunction F: X ⇝ Y to be upper (lower) D*-supercontinuous if F ⁺(V) (F ⁻(V)) is d*-open in X for every open set V of Y. We obtain some characterizations and several properties concerning upper (lower) D*-supercontinuous multifunctions.      

PV型HgCdTe光电探测器中的混沌及其诊断

 对激光辐照半导体光电探测器的实验研究，发现当一束不太强的稳定连续波激光照射在PV型HgCdTe光电探测器上时，可以引起探测器出现混沌行为。利用光电探测器的光电压信号随时间变化的实验数据，通过求功率谱、计算Lyapunov指数对混沌进行了诊断。     

Some Further Properties of the Accelerated Kerr-Schild Metrics

We extend the previously found accelerated Kerr-Schild metrics for Einstein-Maxwell-null dust and Einstein-Born-Infeld-null dust equations to the cases including the cosmological constant. This way we obtain the generalization of the charged de Sitter metrics in static space-times. We also give a generalization of the zero acceleration limit of our previous Einstein-Maxwell and Einstein-Born-Infeld solutions.     

激光与材料参数对瞬态SBS 诱导的激光超声破坏效果的影响

 通过数值求解一维瞬态受激布里渊散射（SBS）声光耦合波方程，从理论上分析了泵浦激光参数及光学材料参数对SBS过程发生阈值的影响。以SBS过程中建立起来的应力场抗拉（压）强度和散射场的反射率为判据，分析了激光脉宽及作用区域长度对激光超声破坏材料效果的影响，探讨了短脉冲激光（约ns）引起的激光超声对材料的破坏机理；讨论了通过参数配置有效遏制SBS过程激光超声对光学材料的破坏问题。     

Large Scale Linear Programs and Heuristics for the Design of Survivable Telecommunication Networks

We consider the problem of providing a minimum cost multi-service network subject to one link failure scenarios. We assume our network is fully meshed and demand is satisfied by using direct or two hop-paths. We provide a large scale linear programming formulation and propose and test two effective heuristics.