High-performance nonfused ring electron acceptor with a steric hindrance induced planar molecular backbone

Three nonfused ring electron acceptors (NFREAs) TTC6,TT-C8T and TT-TC8 were purposefully designed and synthesized.The molecular geometry can be adjusted by the steric hindrance of lateral substituents.According to the DFT calculations,from TTC6 to TT-C8T and TT-TC8,planarity of the molecular backbone is gradually improved,accompanying with the enhancing of intramolecular charge transfer effect.As for TT-TC8,the two phenyl substituents are almost perpendicular to the molecular backbone,which endues the acceptor with good solubility and suppresses it to form over-aggregation.Multidirectional regular molecular orientation and closer molecular stacking are formed in TT-TC8 film.As a result,TT-TC8 based devices afford the highest PCE of 13.13%,which is much higher than that of TTC6 (4.41%) and TT-C8T (10.42%) and among the highest PCE values based on NFREAs.     

Enantioselective Synthesis of Acyclic Stereotriads Featuring Fluorinated Tetrasubstituted Stereocenters

Elaboration of enantioenriched complex acyclic stereotriads represents a challenge for modern synthesis even more when fluorinated tetrasubstituted stereocenters are targeted. We have been able to develop a simple strategy in a sequence of two unprecedented steps combining a diastereoselective aldol-Tishchenko reaction and an enantioselective organocatalyzed kinetic resolution. The aldol-Tishchenko reaction directly generates a large panel of acyclic 1,3-diols possessing a fluorinated tetrasubstituted stereocenter by condensation of fluorinated ketones with aldehydes under very mild basic conditions. The anti 1,3-diols featuring three contiguous stereogenic centers are generated with excellent diastereocontrol (typically >99 : 1 dr). Depending upon the precursors both diastereomers of stereotriads are accessible through this flexible reaction. Furthermore, from the obtained racemic scaffolds, development of an organocatalyzed kinetic resolution enabled to generate the desired enantioenriched stereotriads with excellent selectivity (typically er >95 : 5).     

基于PI法的门源MS6.4地震前震中附近地震热点图像异常变化研究

基于1980年以来青海省和甘肃省区域地震台网的定位地震目录，分析了研究区最小完备震级，选取空间网格尺度为0.2°×0.2°、地震活动异常学习时间段和预测时间段均为3 a，应用图像信息（PI）法，分析了门源M_S6.4地震发生前震中附近地震热点图像的异常变化过程。结果表明，在2013年1月1日至2016年1月1日的预测时间窗内，冷龙岭断裂和祁连山北缘断裂附近存在明显的地震热点，且地震热点图像颜色偏深，发震概率较高，向前滑动至2014年1月1日至2017年1月1日，2015年1月1日至2018年1月1日和2016年1月1日至2019年1月1日3个预测时间窗，此两断裂附近仍存在地震热点，地震热点图像颜色逐渐由深变浅，而门源M_S6.4地震就落在PI法得到的地震热点内。门源M_S6.4地震前存在明显的地震热点，且地震热点相对集中，地震热点图像颜色由深变浅，震后消失；在祁连山北缘断裂附近，地震热点持续存在，分布较集中，地震热点图像颜色也呈由深变浅的过程。未来需关注祁连山北缘断裂，附近有发生强震的可能。     

开关型Pickering乳液体系

Pickering乳液以胶体尺寸的固体粒子代替传统表面活性剂作为稳定剂,具有超稳定,生物相容性好以及对环境友好等优点。开关型Pickering乳液可随pH值、CO₂/N₂浓度、温度、磁场强度及光强度等条件的变化而改变固体乳化剂的表面润湿性,实现在“乳化”与“破乳”之间的快速转换,在非均相催化、乳液聚合等诸多领域有广泛的应用前景。本文全面总结了近年来开关型Pickering乳液的研究进展及其在界面催化系统、液膜处理有机废水、药物的包封与释放等方面的应用。     

Interfacial Synthesis of a Monolayered Fluorescent Two-Dimensional Polymer through Dynamic Imine Chemistry

A fluorescent monolayered two-dimensional polymer (2DP) containing both tetraphenylethylene (TPE) and imine linkages is synthesized at air-water interface using the Langmuir-Blodgett method. We designed TPE-based monomers with long distances between the TPE and the imine linkages to avoid the charge transfer and therefore keep the fluorescence. A monolayered 2DP provided with more than 104 μm² in domain size and around 0.8 nm thickness was obtained through a successive Schiff base reaction at air-water interface. The nanostructures and fluorescent property of 2DP films were characterized by optical microscopy, SEM, TEM, AFM and fluorescence spectrum. Most importantly, the tip-enhanced Raman spectroscopy (TERS) was utilized here to confirm the success of the polycondensation of monolayered 2DP.     

政府监管下的医院医疗信息分享演化博弈分析

在分析政府监管下医院间医疗信息分享特征的基础上,结合我国当前正在推行的医联体医院间信息分享运作模式,引入梅特卡夫定律并考虑患者评价的影响,分析了监管部门与医院各自的利益组成,建立了监管部门与医院两者之间的演化博弈模型,并采用复制动态方程研究了不同情形下医院间信息分享的演化博弈轨迹。研究表明,政府通过监管并建立激励惩罚机制等引导措施对医院最终达到的演化稳定态具有极大影响;降低医院主体信息分享的风险成本、规范提高医院分享信息的质量、引导患者增强对医院信息分享的关注、制定有吸引力和威慑力的奖惩政策,是促进医院医疗信息分享的关键。研究结果可为政府监管部门预测医院间的信息分享趋势和制定精准化政策以促进分享提供参考。     

Catechol‐Functionalized Polyolefins

The incorporation of comonomers during ethylene polymerization can efficiently modulate important material properties of the polyolefins. Utilizing bioresourced comonomers for the generation of high‐performance polyolefin materials is attractive from a sustainability point of view. In this contribution, bioresourced eugenol and related comonomers were incorporated into polyolefins through palladium‐catalyzed copolymerization and terpolymerization reactions. Importantly, high‐molecular‐weight catechol‐functionalized polyolefins can be generated. The introduction of different metal ions induces efficient interactions with the incorporated catechol groups, leading to enhanced mechanical properties and self‐healing properties. Moreover, the catechol functionality can greatly improve other properties such as surface properties, adhesion properties, and compatibilizing properties. The catechol‐functionalized polyolefin was demonstrated as a versatile platform polymer for accessing various materials with dramatically different properties.     

流变岩体中让压支护作用下隧道力学行为研究

高地应力深埋软岩隧道大变形问题已成为隧道工程建设领域的突出难题. 根据高地应力深埋软岩隧道的变形特征, 基于"围岩能量吸收、变形释放"的让压支护是解决软岩隧道大变形问题的有效方法. 针对流变岩体中深埋圆形隧道在让压支护作用下的力学响应问题, 通过引入分数阶微积分理论, 采用Abel黏壶元件建立了改进的分数阶Burgers蠕变模型来表征围岩的时效变形. 此外, 通过在让压支护不同变形阶段引入刚度修正系数, 克服了传统支护未能考虑围岩变形释放的问题. 据此, 本文推导了在考虑支护延迟安装影响下, 不同变形阶段围岩与让压支护相互作用的解析解. 为了验证理论研究的正确性, 对一算例进行了不同解答及工程结果的比对, 吻合较好. 最后, 参数研究结果表明: 围岩与让压支护间的相互作用受蠕变本构模型分数阶阶数影响较大. 隧道的位移或支护压力与让压位移、支护刚度修正系数间存在线性比例关系, 但由于刚度修正系数仅保持在较小的变化范围内, 隧道的位移或支护压力变化并不显著.      

Effect of Environment on the Scattering of Electrons by a Junction of Different Topological Materials

The studies of electron transport through a junction of topological materials in the literature so far ignore the coupling of a topological material to its surrounding environment. Here, the dynamics of an open system through a stochastic Hamiltonian are simulated to investigate the influence of the environment on the scattering of electrons by a junction of different topological materials, such as a Dirac–Weyl magnetic junction and a topological insulator. It is found that, although the detrimental effect of the environment is inevitable, the Landauer conductance can be enhanced via adjusting the system–environment coupling strength. This result supplies the possibilty of changing the transport feature of topological materials by modulating the surrounded environment. It is also demonstrated that a non-Hermitian Hamiltonian can be used to replace the stochastic Hamiltonian for this study, when the system and the environment coupling are weak.