Green synthesis of the 1-substituted 1H-1, 2, 3, 4-tetrazoles over bifunctional catalyst based on copper intercalated into Mg/Al hydrotalcite modified magnetite nanoparticles

An effective one-pot, convenient process for the synthesis of 1- substituted 1H-tetrazoles from triethyl orthoformate, amines, and sodium azide is described using copper (II) doped and immobilized on functionalized magnetic hydrotalcite (Fe₃O₄/HT-NH₂ Cu^II) as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields in water. The new catalyst was characterized using Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), vibration sample magnetometry (VSM) and inductively coupled plasma analysis (ICP-OES). This new procedure offers several advantages such as short operational simplicity, practicability, and applicability to various substrates and the absence of any tedious workup or purification. The loading amount of Cu^II (doped and immobilized) on functionalized magnetic hydrotalcite was indicated to be 4.66 mmol g⁻¹, obtained from the ICP-OES analysis. Also, the excellent catalytic performance, thermal stability, and separation of the catalyst make it an excellent heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity.     

On the parameter selection in the transformed matrix iteration method

Numerical Algorithms - Recently, Axelsson and Salkuyeh in (BIT Numerical Mathematics, 59 (2019) 321–342) proposed the transformed matrix iteration (TMIT) method for solving a certain...     

(2‐Aminopyrimidine‐κN1)aqua(pyridine‐2,6‐dicarboxylato‐κ3O2,N,O6)copper(II): X‐ray and DFT calculated structure

In the title compound, [Cu(C₇H₃N₂O₄)(C₄H₅N₂)(H₂O)], (I), pyridine‐2,6‐dicarboxylate (pydc²⁻), 2‐aminopyrimidine and aqua ligands coordinate the Cu^II centre through two N atoms, two carboxylate O atoms and one water O atom, respectively, to give a nominally distorted square‐pyramidal coordination geometry, a common arrangement for copper complexes containing the pydc²⁻ ligand. Because of the presence of Cu...X_bridged contacts (X = N or O) between adjacent molecules in the crystal structures of (I) and three analogous previously reported compounds, and the corresponding uncertainty about the effective coordination number of the Cu^II centre, density functional theory (DFT) calculations were used to elucidate the degree of covalency in these contacts. The calculated Wiberg and Mayer bond‐order indices reveal that the Cu...O contact can be considered as a coordination bond, whereas the amine group forming a Cu...N contact is not an effective participant in the coordination environment.     

Periodic solution of a second order, autonomous, nonlinear system

There exist a sufficient condition for the existence of at least one periodic solution for a type of second order autonomous ordinary differential equations. The correctness of the condition has been pointed out by Schauder's fixed point theorem. In order to indicate the validity of the assumptions made, two illustrative examples, showing its application in the nonlinear vibration and relaxation oscillation are presented.     

Effective and selective aerobic oxidation of primary and secondary alcohols using CoFe2O4@HT@Imine‐CuII and TEMPO in the air atmosphere

In this study, we present a versatile and easy procedure for modifying a cobalt ferrite nanoparticle step by step. A new nanocatalyst was prepared via Cu^II immobilized onto CoFe₂O₄@HT@Imine. The catalyst was fully characterized by Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), and vibrating sample magnetometer (VSM) analyses. The current procedure as a green protocol offers benefits including a simple operational method, an excellent yield of products, mild reaction conditions, minimum chemical wastes, and short reaction times. Without any significant reduction in the catalytic performance, up to five recyclability cycles of the catalyst were obtained. The optimization results suggest that the best condition in the oxidation of benzyl alcohol derivatives is 0.003 g of the CoFe₂O₄@HT@Imine‐Cu^II catalyst, TEMPO, at 70°C under solvent‐free condition and air.     

Synthesis of Iridium Oxide Nanotubes by Electrodeposition into Polycarbonate Template: Fabrication of Chromium(III) and Arsenic(III) Electrochemical Sensor

For the first time iridium oxide (IrO₂) nanotubes are synthesized by electrodeposition in a polycarbonate (PC) template. Potential cycling (90 cycles) between 0.0 and 0.9 V is used for the preparation of IrO_x nanotubes onto the PC template with a pore diameter of 100 nm. Field‐emission scanning electron microscopy (FESEM) images show, that IrO₂ nanotubes with uniform diameters of 110±10 nm and an estimated length of 1–3 µm are formed. The electrochemical properties and the electrocatalytic activity of a glassy carbon‐IrO_x nanotube modified electrode toward Cr³⁺ and As³⁺ oxidation are investigated. Finally, the modified electrode is used for micromolar detection of the proposed analytes using differential pulse voltammetry.     

Parallel single-cell optical transit dielectrophoresis cytometer

In this work, we present an optical transit DEP flow cytometer for parallel single-cell analysis. Each cell's dielectric property is inferred from velocity perturbations due to DEP actuation in a microfluidic channel. Dual LED sources facilitate velocity measurement by producing two transit shadows for each cell passing through the channel. These shadows are detected using a 256-pixel linear optical array detector. Massively parallel analysis is possible as each pixel of the detector can independently analyze the passing cells. A wide channel (∼18 mm) was employed to carry many particles simultaneously, and the system was capable of detecting the velocity of over 200 cells simultaneously. We have achieved analysis rates for 10 µm diameter polystyrene spheres response exceeding 250 per second. With appropriate calibration, this DEP cytometer can quantitatively measure the dielectric response. The dielectric response (Clausius–Mossotti factor) of viable CHO cells was measured over the frequency range of 100 kHz to 6 MHz, and the obtained response matches the previously measured values by our group. The DEP cytometer uses simple modular components to achieve high throughput label-free single-cell dielectric analysis and can begin analyzing particles within 10 s after starting to pump the sample into the channel.     

The role of entropy in word ranking

Entropy as a measure of complexity in the systems has been applied for ranking the words in the human written texts. We introduce a novel approach to evaluate accuracy for retrieved indices. We also have an illustrative comparison between proposed entropic metrics and some other methods in extracting the keywords. It seems that, some of the discussed metrics apply similar features for word ranking in the text. This work recommend the entropy as a systematic measure in text mining.     

Functional copolymer/organo‐MMT nanoarchitectures. XIX. Nanofabrication and characterization of poly(MA‐alt‐1‐octadecene)‐g‐PLA layered silicate nanocomposites with nanoporous core–shell morphology

Novel bioengineering functional copolymer‐g‐biopolymer‐based layered silicate nanocomposites were fabricated by catalytic interlamellar bulk graft copolymerization of L‐lactic acid (LA) monomer onto alternating copolymer of maleic anhydride (MA) with 1‐octadecene as a reactive matrix polymer in the presence of preintercalated LA…organo‐MMT clay (reactive ODA‐MMT and non‐reactive DMDA‐MMT) complexes as nanofillers and tin(oct)₂ as a catalyst under vacuum at 80°C. To characterize the functional copolymer layered silicate nanocomposites and understand the mechanism of in situ processing, interfacial interactions and nanostructure formation in these nanosystems, we have utilized a combination of variuous methods such as FT‐IR spectroscopy, X‐ray diffraction (XRD), dynamic mechanical (DMA), thermal (DSC and TGA‐DTG), SEM and TEM morphology. It was found that in situ graft copolymerization occurred through the following steps: (i) esterification of anhydride units of copolymer with LA; (ii) intercalation of LA between silicate galleries; (iii) intercalation of matrix copolymer into silicate layers through in situ amidization of anhydride units with octadecyl amine intercalant; and (iv) interlamellar graft copolymerization via in situ intercalating/exfoliating processing. The main properties and observed micro‐ and nanoporous surface and internal core–shell morphology of the nanocomposites significantly depend on the origin of MMT clays and type of in situ processing (ion exchanging, amidization reaction, strong H‐bonding and self‐organized hydrophobic/hydrophilic interfacial interactions). This developed approach can be applied to a wide range of anhydride‐containing copolymers such as random, alternating and graft copolymers of MA to synthesize new generation of polymer‐g‐biopolymer silicate layered nanocomposites and nanofibers for nanoengineering and nanomedicine applications. Copyright © 2014 John Wiley & Sons, Ltd.