Non-isothermal crystallization of NaX nanocrystals/poly (vinyl alcohol) nanocomposite

Journal of Thermal Analysis and Calorimetry - This paper reports the successful synthesis of NaX nanocrystals using an organic, additive-free hydrothermal approach. Then, solution casting was used...     

Efficacy of incorporating PCMs into the commercial wall on the energy-saving annual thermal analysis

Journal of Thermal Analysis and Calorimetry - In this study, the efficacy of incorporating phase change material (PCM) into the building walls on the annual heat transfer reduction is examined....     

Superior performance of the machine-learning GAP force field for fullerene structures

Structural Chemistry - Carbon force fields are widely used for obtaining structural properties of carbon nanomaterials. We evaluate the performance of a wide range of carbon force fields for...     

An investigation on the influence of the shape of the vortex generator on fluid flow and turbulent heat transfer of hybrid nanofluid in a channel

Journal of Thermal Analysis and Calorimetry - The purpose of this study is to numerically investigate flow field and turbulent heat transfer of hybrid nanofluid, water–DWCNT–TiO2 in a...     

An ultrasensitive fluorescence sensor for determination of trace levels of copper in blood samples

A novel SBA-15-based fluorescent sensor, SBA-PI: mesoporous SBA-15 structure modified with iminostilbene groups, was designed, synthesized, and characterized by Fourier transform-infrared spectroscopy (FT-IR), ultraviolet–visible spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), low-angle X-ray diffraction techniques (low-angle XRD), and N₂ adsorption–desorption techniques. The SBA-PI as a sensor with a selective behavior for detection of Cu²⁺ comprises iminostilbene carbonyl as the fluorophore group. The SBA-PI sensor displays an excellent fluorescence response in aqueous solutions and the fluorescence intensity quenches remarkably upon addition of Cu²⁺. Other common interfering ions even at high concentration ratio showed either no or very small changes in the fluorescence intensity of SBA-PI in the absence of Cu²⁺. A limit of detection of 8.7 × 10⁻⁹ M for Cu²⁺ indicated that this fluorescence sensor has a high sensitivity and selectivity toward the target copper (II) ion. The fabricated Cu²⁺ sensor was successfully applied for the determination of the Cu²⁺ in human blood samples without any significant interference. With the selective analysis of Cu²⁺ ions down to 0.9 nM in blood, the sensor is a promising and a novel detection candidate for Cu²⁺ and can be applied in the clinical laboratory. A reversibility and accuracy in the fluorescence behavior of the sensor was found in the presence of I^¯ that was described as a masking agent for Cu²⁺.

Graphical abstract

     

Pyrimethamine analogs as strong inhibitors of double and quadruple mutants of dihydrofolate reductase in human malaria parasites

Pyrimethamine acts against malarial parasites by selectively inhibiting their dihydrofolate reductase-thymidylate synthase. Resistance to pyrimethamine in Plasmodium falciparum is due to point mutations in the DHFR domain, initially at residue 108 (S108N), with additional mutations imparting much greater resistance. Our previous work, the development of a simple rational drug design strategy to overcome such resistance, used suitable meta-substituents in the pyrimethamine framework to avoid the unfavorable steric clash with mutant side chains at position 108. Interestingly, the meta-chloro analog of pyrimethamine not only overcame the resistance due to S108N, but also that contributed by the more remote mutation, C59R. The present work improves on this by means of other meta-substituents. Against wild type DHFR, double mutant types A16V + S108T and C59R + S108T, and the highly pyrimethamine/cycloguanil-resistant quadruple-mutant form N51I + C59R + S108N + I164L, pyrimethamine itself gave Ki values of 1.5, 2.4, 72.3 and 859 nM, respectively. The meta-substituted analogs, especially the meta-bromo analog, were much more powerful inhibitors of these DHFRs, including the quadruple-mutant form (meta-bromo analog, Ki 5.1 nM). For comparison, the dihydropyrazine antifolate, WR99210, gave Ki values of 0.9, 3.2, 0.8 and 0.9 nM, respectively. Ki values were also measured against recombinant human DHFR, as were their activities against the growth of Plasmodium falciparum cultures bearing the double mutations (FCB and K1 strains) and quadruple mutation (V1/S) and the wild type (3D7). The meta-analogs were highly active against all of these, with the meta-bromo again being the strongest, having an IC50 of 37 nM against V1/S, compared to > 5000 nM for pyrimethamine itself and 1.1 nM for WR99210.     

The vibration-rotation emission spectrum of gaseous HZnCl

Gaseous HZnCl has been synthesized for the first time in a high-temperature tube furnace with a dc discharge in a flowing mixture of pure HCl and Zn vapor. The vibration-rotation emission spectrum of HZnCl was recorded at high resolution using a Fourier transform spectrometer. The H-Zn stretching modes (nu(1)) of the H(64)Zn(35)Cl, H(66)Zn(35)Cl, H(68)Zn(35)Cl, and H(64)Zn(37)Cl species, as well as the 2nu(1)-nu(1) hot band of the most abundant isotopologue H(64)Zn(35)Cl, were observed near 1966 cm(-1). A least-squares fit was performed for each of the four observed isotopologues, and their spectroscopic constants were determined.     

Synthesis and structural characterization of ferrocene-based bis(pyrazol-1-yl)borate ligands: FcB(Me)pz2K, Fc2Bpz2K, and 1,1′-fc[B(Me)pz2]2K2 (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl)

Reaction of the ferrocenyl(dimethylamino)boranes FcB(Me)NMe₂, Fc₂BNMe₂, and 1,1′-fc[B(Me)NMe₂]₂ with 1:1 mixtures of pyrazole and potassium pyrazolide in refluxing THF gave the potassium salts of the ferrocene-based bis(pyrazol-1-yl)borate ligands FcB(Me)pz₂K, Fc₂Bpz₂K, and 1,1′-fc[B(Me)pz₂]₂K₂ in good yield (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl). In the solid state, FcB(Me)pz₂K and Fc₂Bpz₂K form centrosymmetric dimers with short K?Cp contacts suggesting an η⁵ coordination mode of the potassium ion. The crystal lattice of the ditopic ligand 1,1′-fc[B(Me)pz₂]₂K₂ consists of coordination polymer strands featuring essentially the same structural motif that has been observed for the monotopic derivatives. All three scorpionate ligands are thus promising building blocks for the preparation of ferrocene-containing multiple-decker sandwich complexes.     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.