Some necessary and sufficient conditions for Hypercyclicity Criterion

We give necessary and sufficient conditions for an operator on a separable Hilbert space to satisfy the hypercyclicity criterion. This paper is a part of the second author’s Doctoral thesis, written at Shiraz University under the direction of the first author.     

Synthesis of New Dibenzosulfide and Dibenzosulfoxide Macrocyclic Compounds

Some new dibenzosulfo, dibenzosulfoxo macrocyclic diamides are synthesized.     

Highly selective thiocyanate poly(vinyl chloride) membrane electrode based on a cadmium-Schiff's base complex

A PVC membrane electrode based on a cadmium-salen (N,N'-bis-salicylidene-1,2-ethylenediamine) complex as an anion carrier is described. The electrode has an anti-Hofmeister selectivity sequence with a preference for thiocyanate at pH 1.5-11.0. It has a linear response to thiocyanate from 1.0 x 10(-6) to 1.0 x 10(-1) mol L(-1) with a slope of 59.1 +/- 0.2 mV per decade, and a detection limit of 7 x 10(-7) mol L(-1). This electrode has high selectivity for thiocyanate relative to many common organic and inorganic anions. The proposed sensor has a fast response time of approximately 15 s. It was applied to the determination of thiocyanate in a milk sample.     

Chemical composition and antimicrobial activity of the essential oils of Ferula latisecta and Mozaffariania insignis from Iran

The hydrodistilled oils from the aerial parts of Ferula latisecta and Mozaffariania insignis, which is endemic to Iran, were analyzed by GC and GC/MS. (Z)-Ocimenone (32.4%), (E)-ocimenone (20.3%), and cis-pinocarvone (11.4%) were the main components among the 22 constituents characterized in the oil of F. latisecta, representing 87.7% of the total components detected. Twenty-five compounds were identified in the oil of M. insignis, representing 99.0% of the total oil, with octyl acetate (41.1%), β-pinene (30.3%), and α-pinene (23.9%) as the main constituents. The essential oils were examined for their potential antimicrobial activities. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2006.     

Photocatalytic Activity of Supported Metal Nanoparticles and Single Atoms

Photocatalysis has been known as one of the promising technologies due to its eco-friendly nature. However, the potential application of many photocatalysts is limited owing to their large bandgaps and inefficient use of the solar spectrum. One strategy to overcome this problem is to combine the advantages of heteroatom-containing supports with active metal centers to accurately adjust the structural parameters. Metal nanoparticles (MNPs) and single atom catalysts (SACs) are excellent candidates due to their distinctive coordination environment which enhances photocatalytic activity. Metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and carbon nitride (g-C₃N₄) have shown great potential as catalyst support for SACs and MNPs. The numerous combinations of organic linkers with various heteroatoms and metal ions provide unique structural characteristics to achieve advanced materials. This review describes the recent advancement of the modified MOFs, COFs and g-C₃N₄ with SACs and NPs for enhanced photocatalytic applications with emphasis on environmental remediation.     

Investigating the effect of operating parameters on the open circuit voltage of a passive DMFC

The variations of the open circuit voltages (OCVs) were studied in a passive air-breathing direct methanol fuel cell with an air-breathing cathode using Nafion 115 as the electrolyte membrane. The effects of some operating parameters such as cell temperature, cell orientation, and also methanol concentration on the OCV of fabricated fuel cell were investigated experimentally. The experimental results showed that the OCV values depend strongly on the cell orientation, cell temperature, and methanol concentration. The OCV values decrease with an increase in methanol concentration and cell temperature. Also, the OCV values in vertical orientation are lower than the OCV values in other orientations.     

A Facile Room Temperature Synthesis of Zinc Oxide Nanostructure and Its Influence on the Flame Retardancy of Poly Vinyl Alcohol

In this work, poly vinyl alcohol–ZnO nanocomposites were synthesized via two different in situ and ex-situ methods. In ex-situ, at first zinc oxide nanostructures were synthesized by one-step precipitation reaction between zinc acetate and sodium hydroxide. The effect of different surfactants such as poly vinyl pyrrolidone, poly vinyl alcohol and poly ethylene glycol on the morphology of ZnO nanostructures was investigated. Nanostructures were characterized by X-ray diffraction, scanning electron microscopy. The influence of ZnO nanostructures on the flame retardancy of the poly vinyl alcohol matrix was studied using underwriter laboratories UL-94 analysis.     

Spectrophotometric Study of Complexation of Tri-Aza Dibenzosulfide and Dibenzosulfoxide Macrocyclic Compounds with Heavy Metal Ions

The complexation reactions between 7,10,13-triaza-1-thia-4,16-dioxa-20,24-dimethyl-2,3;17,18-dibenzo-cyclooctadecane-6,14-dione ( TTD ) and 7,10,13-triaza-1-sulfoxo-4,16-dioxa-20,24-dimethyl-2,3;17,18-dibenzo-cyclooctadecane-6,14-dione ( TSD ) macrocycles with Ag⁺, Cd²⁺, Cu²⁺, Pb²⁺, Sr²⁺, Tl⁺, and Zn²⁺ ions have been studied in ethanol and methanol solutions at 25°C. The complexes formed between macrocycles ( TTD ) and ( TSD ) with these metals cations had a stiochiometry of 1:1 and 1:2, respectively. The stability constants of the resulting complexes were determined and found to decrease in the order Cu²⁺ > Zn²⁺ > Ag⁺ > Tl⁺ > Cd²⁺ > Pb²⁺ > Sr²⁺ with macrocycle ( TTD ) and Tl⁺ > Zn²⁺ > Cd²⁺ > Pb²⁺ > Cu²⁺ > Ag⁺ > Sr²⁺ with macrocycle ( TSD ).     

Preparation, nano purification, quality control and labeling optimization of [64Cu]-5,10,15,20-tetrakis (penta fluoro phenyl) porphyrin complex as a possible imaging agent

Cu-64 was produced via the ⁶⁸Zn (p,αn)⁶⁴Cu nuclear reaction (≈200 mCi, >95 % chemical yield at 180 μA for 1.1 h irradiation, (radionuclidic purity >96 %, copper-67 as impurity) followed by purification with amino functionalized nano magnetic oxide, Fe₃O₄ aiming to remove trace amount of heavy metal ions from aqueous media due to achieve ultra pure [⁶⁴Cu] CuCl₂ for labeling step. [⁶⁴Cu] labeled 5,10,15,20-tetrakis(penta fluoro phenyl) porphyrin ([⁶⁴Cu]-TFPP) was prepared using freshly prepared [⁶⁴Cu] CuCl₂ (Cu-64; T _1/2 = 12.7 h) and 5,10,15,20-tetrakis(penta fluoro phenyl)porphyrin (H₂TFPP) for 60 min at 100 °C under reflux condition (radiochemical purity: >97 % ITLC, >98 % HPLC, specific activity: 14–16 GBq/mmol). Stability of the complex was checked in final formulation and human serum for 24 h. The partition coefficient was calculated for the compound (log P = 0.73). The biodistribution of the labeled compound in vital organs of wild-type rats was studied using scarification studies and PET imaging up in 2 and 4 h after injection. A detailed comparative pharmacokinetic study performed for ⁶⁴Cu cation and [⁶⁴Cu]-TFPP. The complex is mostly washed out from the circulation through kidneys and liver and can be an interesting tumor imaging/targeting agent due to high specific uptake and rapid excretion through the urinary tract.