n型IBC太阳电池选择性发射极工艺研究

为提升n型叉指背接触(IBC)太阳电池的光电转换效率,采用丝网印刷硼浆和高温扩散的方式形成选择性发射极结构,研究了硼扩散和硼浆印刷工艺对电池发射极钝化性能和接触性能的影响。实验结果表明,在硼扩散沉积时间和退火时间一定的条件下,硼扩散通源(BBr₃)流量为100 mL/min,沉积温度为830 ℃,退火温度为920 ℃时,发射极轻掺杂(p⁺)区域的隐开路电压达到710 mV,暗饱和电流密度为12.2 fA/cm²。发射极局部印刷硼浆湿重为220 mg时,经过高温硼扩散退火,重掺杂(p⁺⁺)区域的隐开路电压保持在683 mV左右,该区域方块电阻仅46 Ω/□,金属接触电阻为2.3 mΩ·cm². 采用该工艺方案制备的IBC电池最高光电转换效率达到24.40%,平均光电转换效率达到24.32%,相比现有IBC电池转换效率提升了0.28个百分点。     

蛋白质-多糖复合体系在活性物质传递中的应用

蛋白质-多糖复合体系作为生物活性物质传递系统的壁材,有着人工合成聚合物或无机物等其他材料不可比拟的多重优势。本文就蛋白质和多糖之间的连接方式及蛋白质-多糖复合体系形成传递系统的多种形式进行了综述,以及对此领域的发展趋势进行了展望。结合蛋白质和多糖的结构特点,二者之间的链接方式分为非共价结合的物理共聚,和共价结合的美拉德偶联、化学交联、酶催化交联等方式,文中分别对各种连接方式的原理和机理,以及其影响因素做了深入阐述。以蛋白质-多糖复合体系为壁材对活性物质的传递形式大体上分成乳化系统、胶束、纳米凝胶、分子复合物以及壳核结构等系统。不同的活性物质的特征和传递需求,可针对性地选择合适结构的蛋白质和多糖种类以及二者的连接方式和传递系统的形式。并且,随着研究的逐步发展和推进,此领域的发展趋势朝着智能化和靶向性的方向进行。目前活性物质的蛋白质-多糖复合体系的传递系统,还依然面临着系统设计、评价和应用等多方面的挑战,这就要求我们在更全面更深入了解认识其对活性物质影响和功效的基础上,安全合理地设计和深入细致地评价活性成分的传递系统。     

Electron-donating methoxy group enhances the stability and efficiency of indole-based fluorescent probe for detecting Cu2+

Research on Chemical Intermediates - Two novel Schiff-base fluorescent probes bearing different substituents were synthesized by the reaction of indole derivatives with 4-aminoantipyrine. The...     

自下而上法制备金-介孔二氧化硅复合纳米管用作还原4-硝基苯酚的催化剂

采用自下而上方法制备了金-介孔二氧化硅复合纳米管,其中金纳米粒子作为催化剂嵌在介孔二氧化硅纳米管管壁内侧。金纳米颗粒的团聚、脱落和晶粒尺寸生长都可以被有效限制,而且催化剂负载量和尺寸大小均可实现简单控制。管壁中的介孔孔道、纳米管末端开口以及一维中空管道可以协同促进反应物扩散,从而提高4-硝基苯酚还原反应活性。循环实验证明这种复合纳米管催化剂具有良好的可重复使用性,而且在反应过程中未出现金纳米粒子脱落或团聚现象。     

模糊识别模式在粉土液化判别中的应用

基于模糊数学的基本原理和方法,分析了粉土液化的影响因素,选取粉土的平均粒径,相对密度,标准贯入击数和上覆有效压力作为评价指标,构造粉土液化的模糊识别模式。验证和应用结果表明,模糊识别模式具有很好的映射能力,是粉土液化势预测的有效手段。     

Fabrication,Characterization and Optical Properties of TiO2 Nanotube Arrays on Boron-doped Diamond Film Through Liquid Phase Deposition

TiO2 nanotube（TiNT） arrays were deposited on boron-doped diamond films by a liquid-phase deposition method with ZnO nanorod arrays as the template.The different morphologies of TiNTs have been obtained by controlling the morphology of ZnO template.The X-ray diffraction and energy-dispersive X-ray analysis show that the ZnO nanorod array template has been removed in the TiNTs formation process.The crystalline quality of the TiNTs is improved by increasing the annealing temperature.The band gap of the TiNTs is about 3.25 eV estimated by the UV-Vis absorption spectroscopy,which is close to the value of bulk TiO2.In the photoluminescence spectrum,a broad visible emission in a range of ca.550-750 nm appears due to the surface oxygen vacancies and defects.     

2-甲氧基-4-乙酰胺基苯甲酸甲酯合成方法的改进

以ＰＡＳ－ Ｎａ 为原料，经水溶液中酰化后，再经酯化与醚化一步反应制得２－ 甲氧基－ ４ － 乙酰胺基苯甲酸甲酯，总收率８１％ 。     

Shape of fluid vesicles anchored by rigid rod

A method combined the self-consistent field theory (SCFT) for the rigid rod with the Helfrich curvature elasticity theory for the vesicle has been developed for studying the shape of vesicles anchored by rigid rod. Both the deformation of the vesicle and the density distribution of rod segments can be obtained. Because of the vesicle's impenetrability for the rod segments and the decrease of the available space for the rod orientational configurations, the anchored rod segments exert the inhomogeneous entropic pressure on the vesicle and induce the change of vesicle shape. The interaction between the rod segments and the vesicle membrane exerts an extra tension to the membrane. Thus the interaction between the vesicle membrane and the rod segments, the rod length, and the bending rigidity of vesicle are investigated as the important factors to the shape transformation of the vesicle and the density distribution of rod segments. This method can be extended to more complicated and real biological systems, such as polymers with different topological architectures/vesicle, multiple chains/vesicle, protein inclusions, etc.     

Budding dynamics of individual domains in multicomponent membranes simulated by N-varied dissipative particle dynamics

We study the budding dynamics of individual domains in flat, multicomponent membranes using dissipative particle dynamics (DPD) simulations with varied bead number N, in which addition and deletion of beads based on their density at the membrane boundary is introduced. The budding process of a tubular bud, accompanied by a dynamical transition reflected in the energy and morphology evolutions, is investigated. The simulations show that budding duration is shortened with increasing line tension and depends on the domain size quadratically. At low line tension, increasing bending modulus accelerates budding at first, but suppresses the process as it increases further. In addition, the controlling role of the surface tension in the budding process is also explored. Finally, we use the N-varied DPD to simulate the experimentally observed multicomponent tubular vesicles, and the three bud growth modes are confirmed.