Comparison between Abel test stability and thermal decomposition behavior of nitrocellulose

Journal of Thermal Analysis and Calorimetry - Nitrocellulose (NC) is prone to spontaneous decomposition with exothermic heat release and thus is generally evaluated for stability during the storage...     

Thermal behavior and dismantlability of adhesives containing various inorganic salts

As a fundamental study on the development of dismantlable adhesives containing chemically reactive materials, the thermal behavior and dismantlability of an epoxy adhesive containing one of the twenty-seven inorganic salts (chlorides, perchlorates, and nitrates) were observed. In the thermal behavior measured by the differential scanning calorimetry, epoxy adhesives with inorganic salts containing iron, copper, zinc, and aluminum cations released heats of reaction at lower temperatures than the adhesive alone or the adhesives with other inorganic salts. Since such inorganic salts were considered to be effective candidates as fillers in dismantlable adhesives, the adhesion strengths of their mixtures with the adhesive were observed after heat aging at 270 °C for 30 min. The results showed that both chloride and perchlorate salts specifically decreased the adhesion strength after heating. On the other hand, the effect of nitrate salts on the decrease in adhesion strength was low in comparison with the chloride and perchlorate salts.     

Mechanistic action of ferric oxide in the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In the hydrosilylation of 1,6-divinyl(perfluorohexane) (FDV) with trichlorosilane (TCS) in the presence of catalytic chloroplatinic acid (Pt-Cat) under an air atmosphere (0.99 MPa), a runaway reaction accompanied by a severe pressure release occurred when Fe₂O₃ was present as an impurity in the system. In this study, we investigated the mechanism of action of Fe₂O₃ on this hydrosilylation by monitoring the thermal behavior of TCS/FDV/Pt-Cat/Fe₂O₃ mixtures with various compositions, using an accelerating rate calorimeter (ARC). In the case of TSC/FDV/Pt-Cat, a typical hydrosilylation composition in the industrial process, heat release, possibly due to hydrosilylation, began at 90 °C. On the other hand, for TCS/FDV/Pt-Cat/Fe₂O, the heat release due to hydrosilylation was hardly observed, but abrupt heat and pressure releases occurred at higher temperatures (>170 °C). Like TCS/FDV/Pt-Cat/Fe₂O₃, TCS/FDV, which contain neither Pt-Cat nor Fe₂O₃, released heat and pressure at high temperatures (>210 °C), while the heat and pressure release rates were comparatively low. From these results, the runaway reaction may occur when hydrosilylation is prevented, and Fe₂O₃ behaves as a negative catalyst for hydrosilylation. In the FT-IR spectrum of TCS/FDV/Pt-Cat/Fe₂O₃ after heating, an absorption peak at approximately 1,710 cm^?1, which may be attributed to a carbonyl group, was observed. Thus, it is considered that the runaway reaction observed during the hydrosilylation results from the action of Fe₂O₃ as a negative catalyst for hydrosilylation as well as as an oxidation catalyst for the by-product generated from the reaction between TCS and FDV.     

Sequence-specific cleavage of RNA by designed ribozymes

Abstract

Ribozymes that distinguish a single base change in RNA were synthesized and used to specifically cleave c-Ha-ras messenger RNA. Using phosphorothioate containing oligonucleotide substrates, we have shown that Mg²⁺ binds to the pro-R oxygen of the phosphate and that the RNA cleavage reaction occurs via an in-line mechanism. Oligoribonucleotides containing a modified nucleoside are described.     

Functional Monomers and Polymers. CXXXVI. Effect of Metal Ions on the Interaction of Synthetic Nucleic Acid Analogs

The effect of metal ions on the conformation of thymine-containing poly-D-lysine was studied by CD spectra in aqueous solution. Of the metal ions studied, only copper(II) ion affected the conformation of nucleic acid analogs. Copper(II) ion also affected the specifically interacting system made up of thymine-containing poly-D-lysine and polyadenylic acid.     

Investigation of thermal hazard during the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In this study, we examined the reaction hazard during the hydrosilylation reaction between trichlorosilane (TCS) and 1,6-divinyl(perfluorohexane) (FDV) in the presence of a butanol solution of chloroplatinic acid (Pt-Cat) as the catalyst. Assuming the three industrial risks of excessive addition of Pt-Cat, contamination by iron rust and mixing with cooling water, we observed the temperature and pressure change of TCS/FDV with an excessive amount of Pt-Cat, TCS/FDV/Pt-Cat with Fe₂O₃ and TCS/FDV/Pt-Cat with distilled water, using an accelerating rate calorimeter (ARC). The temperature and pressure greatly increased, especially in the sample with Fe₂O₃. For instance, in TCS/FDV/Pt-Cat with 1.5 wt.% Fe₂O₃, the heat release rate exceeded 624 K · min^?1 and the pressure rose above 25 MPa during the exothermic reaction.     

Development of novel pyrrole synthesis for the preparation of intermediates of bioactive pyrrole alkaloids

We have developed a novel method for the synthesis of 3,4-diarylpyrrole-2,5-dicarboxylates via α-diazo esters, which are easily obtained from phenylalanine derivatives. Utilizing this method, intermediates of bioactive compounds having the structure of 3,4-diarylpyrrole-2,5-dicarboxylates were synthesized.     

Novel approach to arylhydrazones, the precursor for Fischer indole synthesis, via diazo esters derived from α-amino acid esters

A novel method for synthesizing arylhydrazones, the precursor for Fischer indole synthesis, using aryllithium reagents and α-diazo esters that are easily obtained from α-amino acid esters, is described.