A rapid solvent extraction method for the determination of caesium-137 in environmental materials

A solvent extraction method for the quantitative determination of caesium-137 in environmental samples is described. Caesium carrier is added to the ashed sample, which is dissolved with hydrochloric acid. The solution is filtered to remove any carbon and the pH is adjusted to 2.0. Sodium dodecylbenzene sulphonate is added and the extraction is done with phenol-nitrobenzene mixture. The organic phase is washed with EDTA solution and the caesium is stripped from the washed solvent with 6 M hydrochloric acid. The caesium is precipitated as caesium chlorostannate to ensure absolute decontamination from potassium-40. Recovery from standard solution is about 85% and from vegetation, rainwater and effluent samples about 80%. The method is applicable in the presence of large quantities of interfering ions, and decontamination factors for many nuclides are greater than 10³.     

Spectrophotometric and gravimetric determination of sulfur in sebacate-base lubricants

Sulfur is determined in sebacate-base lubricants spectrophotometrically and gravimetrically. In the spectrophotometric method, a 0.2–0.3-g sample is treated with mixed acids, magnesium chloride is added, and the solution is evaporated to dryness. The sulfate is reduced to hydrogen sulfide by treatment with a mixture of hydriodic. hypophosphorous, and hydrochloric acids, and the hydrogen sulfide is distilled into ammonia solution. Lead citrate reagent is added and the brownish yellow color of lead sulfide sol is measured. An improved technique and apparatus for the distillation is described. In the gravimetric method, a 5-g sample is treated with mixed acids, antimony and tin are volatilized by treatment with hydrobromic acid, and sulfur is precipitated as barium sulfate. The recommended range of the spectrophotometric method is 0.005–0.15%,and that of the gravimetric method is 0.01–1% sulfur.     

山东省主栽果树生殖器官中稀土与微量营养元素的相关性研究

通过对山东省5大类主栽果树20余个树种的花粉、种子和果实稀土与微量元素自然含量进行分析比较, 认为稀土(RE)与微量元素在各树种花粉中平均含量顺序为Fe＞Zn＞B＞Cu＞Mn＞RE, 种子中B＞Fe＞Zn＞Mn＞Cu＞RE, 果实中Fe＞B＞Zn＞Cu＞Mn＞RE. 各元素在各生殖器官中的自然分布因树种而有很大差异. 但基本规律类同, 即花粉＞种子＞果实. 花粉富集各种微量营养元素的能力都很强. 花粉和果实稀土与微量元素之间绝大多数呈正相关, 种子大多呈负相关, 但相关性均不显著.     

Precolumn,Capillary Column,Electron Capture G-AS Chromatography For High Efficiency Trace Determination

Abstract

A method for gas chromatographic trace determination is described in which the sample solution is injected into a packed precolumn which is connected to an EC-detector. When solvent and low boiling compounds have been eluted, the precolumn is connected to the cold entry of a capillary column with another EC-detector and the trace compound is collected as a narrow band at the entry of this column. The precolumn is then reconnected to its own detector, the capillary column is heated and the trace compound is eluted and measured. Meanwhile high boiling compounds are swept out of the precolumn. When the base line of the precolumn is stable the next sample is injected and the capillary column is cooled again, and so on. In order to avoid background plateaus and ghost peaks the carrier gas must be purified, which is easily achieved with cooling traps with dry-ice and acetone.     

D241树脂分离纯化黄芩总黄酮的研究

本文研究了用241树脂分离纯化黄芩总黄酮的方法和工艺。实验结果表明：D241树脂对黄芩总黄酮的静态交换容量是77mg/ml树脂。在pH11.0、流速2.0BV/h、提取液中总黄酮浓度17.5mg/ml条件下，D241树脂对黄芩总黄酮的动态交换容量为43.8mg/ml。用60％甲醇作为黄芩总黄酮洗脱剂，在PH4.0、洗脱流速1.5BV/h条件下，4．5BV洗脱剂即可完全洗脱被D241树脂交换的黄芩总黄酮。与酸沉淀法相比较，经过除去果胶，总黄酮纯度由33．34％提高到74．9％，粗品收得率由11.52%降低至4.83%；经过D241树脂分离纯化，其纯度达到91.5%，产品收得率3.54%。     

Wastewater treatment using nanomaterial quaternary photocatalyst ZrCdPbO4 - Removal of colour pollutant by an eco friendly process

Pollution of environment is a major issue and has drawn attention of researchers throughout the globe. Water is polluted by various means like excretion of various industries and house releases, for example release of yarn, paper, and cloth industries etc. Present investigation consists of removal of such a pollutant. For this, synthesis of a novel quaternary nano particle sized photocatalyst ZrCdPbO₄ is carried and its characterization by different analytical techniques is also carried out. This is further used for removal of colour pollutants from the environment and Erythrosine-B is considered as a role model. Effect of various operational parameters like pH, concentration of dye, amount of photocatalyst, irradiation power etc. is studied, maximum degradation condition is extracted, and it is observed that reaction follows pseudo first order kinetics. Scavenger study suggests the participation of OH free radical in the reaction. Complete degradation of the dye in presence of light and photocatalyst is reported here by. Reusability of the photocatalyst is tested and is found to work up to five cycles efficiently.     

多元统计描述中随机误差与变量空间角的关系

多元分析的误差传递需要一种简单、准确、数值化的表达方法.向量空间中,线性多元混合信号的随机误差可表述成真值子空间中随机向量的表现;由体系多元变量对应的向量构成的真值子空间中,被关注向量和其他向量子空间的空间角θ是描述多元体系的重要参数.如果被关注向量和其他向量子空间关系确定,体系总体误差呈正态分布,那么,被关注向量上误差也是正态分布,其多元统计分析结果的标准差与体系误差标准差的比值为1/(2·sin(θ/2),结论在构造算例和邻、间、对苯二酚混合体系的紫外光度分析中得到验证.     

水性聚氨酯的制备及其性能的研究

本文以琥珀酸酐与三羟甲基丙烷反应,制得了含有羟基和羧基的酯类亲水性单体,并以此单体与ＴＤＩ和ＰＰＧ－１０００反应,制得了含有羧基的聚氨酯预聚体,在三乙醇胺水溶液中分散得到了水性聚氨酯（简称ＷＰＵ）。本文对预聚体的溶剂种类和用量,对乳胶粒的大小及形状的影响进行了研究,确认溶剂的用量越大,乳胶的粒径就越小;以丙酮作溶剂,乳胶粒为棒状或橄榄球状,而以丁酮为溶剂,得到的乳胶粒为圆球状。通过改变亲水单体的用     

氟吗啉合成工艺热危险性及动力学研究

氟吗啉是一种新型杀菌剂, 合成工艺热危险性和动力学研究将解决工程问题, 并保障安全生产. 采用差示扫描量热-热重分析仪(DSC-TG)测试主要原料、中间体和产品的热稳定性, 采用反应量热仪(RC1)研究反应热行为, 同时开展反应动力学研究. 研究结果显示, 主要中间体(3,4-二甲氧基苯基)(4-氟苯基)甲酮吸热分解温度为559.3 K, 乙酰吗啉吸热分解温度为478.2 K, 氟吗啉吸热分解温度为638.6 K. 氟吗啉合成反应摩尔放热量为15.44 kJ/mol, 绝热温升ΔT_ad为9.1 K, 本研究合成工艺的热危险性较小. 氟吗啉合成反应动力学方程为：r_A=kc_A^a=8.34×10^-3C_A^0.57, 对主要中间体(3,4-二甲氧基苯基)(4-氟苯基)甲酮的反应级数为0.57 级.     

Determination of free, total, and esterified cholesterol by high-performance liquid chromatography

A method is described for measuring free, total, and esterified cholesterol in blood serum in which reversed-phase liquid chromatography is used and the eluate is monitored at 200 nm. The sample for total cholesterol is prepared according to the Abell-Kendall procedure, and for free cholesterol an extract of serum--isopropanol (1:5, v/v) is used. The column is a muBondapak C18, 10 micrometers, and the mobile phase for total cholesterol is isopropanol--acetonitrile (50:50, v/v); for free cholesterol, it is isopropanol--acetonitrile--water (60:30:10). An approximation of the free cholesterol, triglycerides, and individual cholesteryl esters is obtained from single chromatograms of isopropanol extracts of serum if the first mobile phase is used. In a comparison study with the Abell-Kendall method for total cholesterol, the correlation is excellent and the precision is acceptable.     

用计算全息法检测卡塞格林系统主镜

为实现对卡塞格林光学系统中的非球面主镜表面面形的高精度检测,设计了一种二元位相型计算全息图(CGH)。介绍了工作原理,对CGH的相位模型参数的优化设计、衍射次级分离以及台阶位置与深度计算等关键问题进行了讨论。通过引入虚拟玻璃的概念快速建立非球面检测模型,针对卡塞格林系统主镜中心开孔的特点,通过加入同轴载波实现了衍射次级的完全分离,相比目前常用的倾斜载波方法简化了相位量化复杂度,数值仿真计算出了最优的台阶深度,降低了加工难度。给出了相应的设计方法及实例,研制投产了CGH。测试得到主镜面形的均方根误差为0.018λ,并与传统补偿器结果(RMS=0.019λ)进行对比,两者测试结果吻合,验证了该设计与检测方法的正确性,该设计方法简单快捷,适用于卡塞格林光学系统主镜面形检测。     

Determination of streptomycin residues in food by solid-phase extraction and liquid chromatography with post-column derivatization and fluorometric detection

A reliable and sensitive procedure is presented for the analysis of streptomycin (STP) in food of animal origin, like meat, milk and honey. The method is based on a separation by ion-pair liquid chromatography with β-naphthoquinone-4-sulfonate (NQS) postderivatization and fluorescence detection. The clean-up of the extract is done by solid-phase extraction, firstly with a cation-exchange cartridge and secondly with an octadecyl cartridge. The selectivity is very good and not many interfering peaks are observed for various food matrices. The streptomycin recovery of the total procedure is superior to 80%. The procedure is quantitatively characterized and repeatability, linearity, detection and quantification limits are very satisfactory. A special focus is given to STP residues in honeys and a survey on 64 commercial honeys is presented. For honey analysis, the HPLC method is compared with an immunoassay test (ELISA), and the possibility of using this test for screening with and without solid-phase extraction clean-up is also discussed.     

Spectrophotometric determination of pentaerythritol tetranitrate (PETN) in waste water from lead styphnate primer plants

An accurate spectrophotometric method is proposed for the determination of pentaerythritol tetranitrate (PETN) in waste water from lead styphnate primer plants by use of phenoldisulphonic acid. The waste water is filtered through a sintered glass crucible and the PETN is determined in the filtrate and the residue. In the determination of PETN in the filtrate, sodium hydroxide is added and the PETN is extracted with methylene chloride (in alkaline solution, styphnate and TNT are not extracted). The methylene chloride solution is then evaporated to dryness, the residue is treated with a solution of phenoldisulphonic acid in sulphuric acid, water and ammonia are added, and the yellow colour is measured. In the determination of PETN in the residue, the PETN is dissolved in acetone, an aliquot of the acetone solution is treated with water and sodium hydroxide, the PETN is extracted with methylene chloride and the colour is developed as above. Various factors affecting the determination were investigated. The solubility of PETN in water was studied.     

Vibrational-translational energy transfer n atom-polyatomic molecule collisions in thermal reaction systems

Vibrational-translational energy transfer probabilities and collisional efficiencies are calculated for atom-polyatomic molecule collisions. It is assumed that a collision complex is formed and that the total internal vibrational energy is statistically distributed among all the modes of the complex. An attractive potential is assumed and account is taken of the centrifugal barrier. Conservation of system angular momentum is imposed. Convolution of the several thermal distribution functions is carried out and completeness and detailed balance are observed. Comparison of calculated quantum statistical quantities with experiment is made for the thermal isomerization of methyl and ethyl isocyanide in the presence of heavy atomic bath gases, such as Xe or Ar, and semiquantitative agreement is found.     

Sequential determination of uranium (IV), free acidity and hydrazine in a single aliquot

A simple analytical procedure for the sequential determination of uranium (IV), free acidity and hydrazine in presence of hydrolysable ions is developed and described. In this method, first, uranium (IV) is determined using fiber optic aided spectrophotometry then same solution is used for determination of free acidity and hydrazine. Free acid is titrated with standard sodium carbonate solution after uranium (IV) is masked with EDTA. Once the end point for the free acid is determined at pH 3.0, an aliquot of formaldehyde is added to liberate the acid equivalent to hydrazine which is then titrated with the same standard sodium carbonate solution using an automatic titration system. The described method is simple, accurate and reproducible. The overall recovery of uranium (IV), nitric acid and hydrazine is 98% with 3% relative standard deviation respectively. The major advantage of the method is that it uses sodium carbonate a primary standard as titrant and generation of corrosive analytical wastes containing oxalate or sulphate is avoided. Valuable metals like uranium and plutonium can easily be recovered from analytical waste before final disposal.     

Non-stick droplet surgery with a superhydrophobic scalpel

Cutting of nonstick droplets with a double-faced superhydrophobic blade is reported first. The process of manufacturing the superhydrophobic scalpel is presented. Cutting of water marbles and droplets deposited on a superhydrophobic surface is possible when the velocity of the blade is higher than a certain critical value. An estimation of the critical blade velocity coinciding with experimental findings is presented. Cutting of Janus and glycerol-based marbles is discussed. Coalescence of glycerol nonstick drops and marbles under cutting is treated.     

STUDY ON PET-PA66 COPOLYMER

In this work the PET-PA 66 copolymers are obtained. The characterization of chemical structure of copolymer chain by NMR method is also given. It is shown that when the 66 Nylon salt is added in the copolycondensation, the adipic acid and hexamethylenediamine reacted mainly by itself and the obtained copolymer is a random copolymer, and when the Nylon 66 oligomer is added, the obtained copolymer is a block copolymer. The result of NMR analysis is demonstrated by properties investigation.     

N,O-羧甲基壳聚糖的合成和性质研究

采用多段升温法将壳聚糖改性,合成了取代度为1.84、平均分子量为3.08×105、等电点为7.28的N,O-羧甲基壳聚糖(CMC),分别用紫外光谱、红外光谱、荧光光谱对其结构进行了表征,并对其水溶液的Zeta电位、电导率、表面张力以及水分散体系中羧甲基壳聚糖微粒的粒径分布进行了研究.结果表明, N,O-羧甲基壳聚糖具有表面活性;介质的pH值和浓度对羧甲基壳聚糖溶液的稳定性有很大的影响.     

Staircase voltammetry with finite diffusion space

A theory of the staircase voltammetry in a thin-layer cell is developed. The influence of the cell thickness and the redox reaction rate constant on the current and the peak potentials is analyzed. For moderately thick cells, the kinetic maximum is predicted. The relationship between peak currents and the square root of the scan rate is not linear and the response may entirely vanish if the redox reaction is fast, the cell is very thin and the scan rate is slow.     

微波辅助提取-固相膜萃取测定水体沉积物中的甲基汞

利用微波辅助提取-固相膜萃取前处理技术分离富集水体沉积物中的甲基汞,固相膜萃取的前处理方法能够集富集和净化为一体,有效地去除基质的影响。方法的关键在于样品的萃取过程,萃取过程中既要保证样品中甲基汞的原来形态不被破坏和转化,又要保证其从样品中被充分萃取以达到稳定可靠的回收效果。通过微波辅助提取技术将水体沉积物中的甲基汞提取到溶液后,提取液通过0.01%的二乙基二硫代氨基甲酸钠改性后的C18固相萃取膜,选择性地将提取液中的甲基汞分离富集的同时净化。洗脱液再经过原子荧光光谱仪进行测定。实验条件考察了流动相、微波提取条件以及固相膜萃取条件对甲基汞的影响。在最优的实验条件下,对甲基汞的稳定性进行了研究,实验结果表明在4 ℃以及-15 ℃条件下贮存,甲基汞降解不显著。同时对沉积物实际样品和加标样品进行了分析,所得结果沉积物中甲基汞检出限为0.20 μg/kg,沉积物实际样品的加标回收率和相对标准偏差分别在71.3%～87.6%和2.00%~6.36%之间,实验结果令人满意。该方法萃取速度快、消耗溶剂少、萃取效率高,可以同时处理多个样品,节约能耗,绿色环保,符合现代监测分析的发展趋势,适用于分析测定水体沉积物中的甲基汞。