Comparison between Abel test stability and thermal decomposition behavior of nitrocellulose

Journal of Thermal Analysis and Calorimetry - Nitrocellulose (NC) is prone to spontaneous decomposition with exothermic heat release and thus is generally evaluated for stability during the storage...     

Coexistence of Spin–Lattice Relaxation and Phonon-Bottleneck Processes in GdIII–Phthlocyaninato Triple-Decker Complexes under Highly Diluted Conditions

Gd³⁺ complexes have been shown to undergo unusual slow magnetic relaxation processes similar to those of single-molecule magnets (SMMs), even though Gd³⁺ does not exhibit strong magnetic anisotropy. To reveal the origin of the slow magnetic relaxation of Gd³⁺ complexes, we have investigated the magnetic properties and heat capacities of two Gd³⁺-phthalocyaninato triple-decker complexes, one of which has intramolecular Gd³⁺–Gd³⁺ interactions and the other does not. It was found that the Gd³⁺–Gd³⁺ interactions accelerate the magnetic relaxation processes. In addition, magnetically diluted samples, prepared by doping a small amount of the Gd³⁺ complexes into a large amount of diamagnetic Y³⁺ complexes, underwent dual magnetic relaxation processes. A detailed dynamic magnetic analysis revealed that the coexistence of spin–lattice relaxation and phonon-bottleneck processes is the origin of the dual magnetic relaxation processes.     

Detailed Analysis of the Crystal Structures and Magnetic Properties of a Dysprosium(III) Phthalocyaninato Sextuple-Decker Complex: Weak f–f Interactions Suppress Magnetic Relaxation

In the research field of single-molecule magnets (SMMs), lanthanoid–lanthanoid interactions, so-called f–f interactions, are known to affect the SMM properties, although their magnitudes are small. In this article, an SMM with very weak f–f interactions is reported, and the effects of the interactions on the SMM properties are discussed. X-ray structural analysis of the Dy^III-Cd^II-phthalocyaninato sextuple-decker complex (Dy₂Cd₃) reveals that the intramolecular Dy−Dy length in Dy₂Cd₃ is more than 13 Å, which is longer than the intermolecular Dy−Dy length. Even though the two Dy^III ions are far apart, intermolecular ferromagnetic dipole–dipole interactions are observed in Dy₂Cd₃. From detailed analysis of ac magnetic susceptibilities, quantum tunneling of the magnetization (QTM) in Dy₂Cd₃ is partially suppressed owing to the existence of very weak Dy−Dy interactions. Our results show that even very weak Dy−Dy interactions act as a dipolar bias, suppressing QTM.     

Scanning liquid-crystal thermometry and stereo velocimetry for simultaneous three-dimensional measurement of temperature and velocity field in a turbulent Rayleigh-Bérnard convection

In this paper, we report on an experimental technique for the simultaneous measurement of temperature and three components of velocity in a three-dimensional thermal flow using scanning liquid-crystal thermometry and stereo velocimetry. The temperature is measured by the color image analysis of the liquid-crystal particles suspended in a fluid, while the three velocity components are measured by stereo particle image velocimetry (stereo PIV) with the aid of tracer particles. The measurement is carried out by scanning the light-sheet plane while capturing the sequential color images of the liquid crystals and tracer particles. This measurement allows the reconstruction of the three-dimensional distribution of temperature and full velocity field simultaneously. The present experimental technique is applied to the horizontal fluid layer of a turbulent Rayleigh-Bérnard convection and the three-dimensional structures of thermal plumes are evaluated. The experimental results indicate that the structures of plumes are often correlated with the vertical velocity of the fluid, but they behave randomly in space, influenced by the large-scale turbulence evident in the middle of the fluid layer.     

Mechanistic Investigation of Catalyst‐Transfer Suzuki–Miyaura Condensation Polymerization of Thiophene–Pyridine Biaryl Monomers with the Aid of Model Reactions

We have investigated the requirements for efficient Pd‐catalyzed Suzuki–Miyaura catalyst‐transfer condensation polymerization (Pd‐CTCP) reactions of 2‐alkoxypropyl‐6‐(5‐bromothiophen‐2‐yl)‐3‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)pyridine ( 12 ) as a donor–acceptor (D –A) biaryl monomer. As model reactions, we first carried out the Suzuki–Miyaura coupling reaction of X–Py–Th–X′ (Th=thiophene, Py=pyridine, X, X′=Br or I) 1 with phenylboronic acid ester 2 by using tBu₃PPd⁰ as the catalyst. Monosubstitution with a phenyl group at Th‐I mainly took place in the reaction of Br–Py–Th–I ( 1 b ) with 2 , whereas disubstitution selectively occurred in the reaction of I–Py–Th–Br ( 1 c ) with 2 , indicating that the Pd catalyst is intramolecularly transferred from acceptor Py to donor Th. Therefore, we synthesized monomer 12 by introduction of a boronate moiety and bromine into Py and Th, respectively. However, examination of the relationship between monomer conversion and the M_n of the obtained polymer, as well as the matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectra, indicated that Suzuki–Miyaura coupling polymerization of 12 with (o‐tolyl)tBu₃PPdBr initiator 13 proceeded in a step‐growth polymerization manner through intermolecular transfer of the Pd catalyst. To understand the discrepancy between the model reactions and polymerization reaction, Suzuki–Miyaura coupling reactions of 1 c with thiopheneboronic acid ester instead of 2 were carried out. This resulted in a decrease of the disubstitution product. Therefore, step‐growth polymerization appears to be due to intermolecular transfer of the Pd catalyst from Th after reductive elimination of the Th‐Pd‐Py complex formed by transmetalation of polymer Th–Br with (Pin)B–Py–Th–Br monomer 12 (Pin=pinacol). Catalysts with similar stabilization energies of metal–arene η²‐coordination for D and A monomers may be needed for CTCP reactions of biaryl D–A monomers.     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Investigation of thermal hazard during the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In this study, we examined the reaction hazard during the hydrosilylation reaction between trichlorosilane (TCS) and 1,6-divinyl(perfluorohexane) (FDV) in the presence of a butanol solution of chloroplatinic acid (Pt-Cat) as the catalyst. Assuming the three industrial risks of excessive addition of Pt-Cat, contamination by iron rust and mixing with cooling water, we observed the temperature and pressure change of TCS/FDV with an excessive amount of Pt-Cat, TCS/FDV/Pt-Cat with Fe₂O₃ and TCS/FDV/Pt-Cat with distilled water, using an accelerating rate calorimeter (ARC). The temperature and pressure greatly increased, especially in the sample with Fe₂O₃. For instance, in TCS/FDV/Pt-Cat with 1.5 wt.% Fe₂O₃, the heat release rate exceeded 624 K · min^?1 and the pressure rose above 25 MPa during the exothermic reaction.     

Enantioselective Total Synthesis of Dysidavarone A,a Novel Sesquiterpenoid Quinone from the Marine Sponge Dysidea avara

Dysidavarone A, a structurally unprecedented sesquiterpenoid quinone, was synthesized in 30 % overall yield in a longest liner sequence of 13 steps from commercially available o‐vanillin. A highly strained and bridged eight‐membered carbocyclic core was established by the C7?C21 carbon bond formation through a copper enolate mediated Michael addition to the internal quinone ring.     

Evaluation of the Efficiency of the Macrolactonization Using MNBA in the Synthesis of Erythromycin A Aglycon

Various intermediates for the synthesis of erythronolide A, an aglycon of erythromycin A, are prepared from the corresponding seco‐acids using 2‐methyl‐6‐nitrobenzoic anhydride (MNBA) in the presence of 4‐(dimethylamino)pyridine (DMAP) with or without triethylamine. The efficiency of the MNBA lactonization is assessed by studying this method and comparing the results with those of the other established macrocyclization protocols. It has been finally concluded that (i) the conformationally appropriate substrate for the monomeric cyclization gave the desired lactone in excellent yield under mild reaction conditions in the presence of MNBA and DMAP, (ii) the highly‐strained substrate for the cyclization also afforded the monomeric lactone in relatively good yield at 100°C in toluene, and (iii) the seco‐acid having stable linear conformation, which preferred dimerizing more than forming the monomeric lactone, provided the corresponding diolide in high yield with the constant ratio of the monomer to dimeric lactone (approximately 1/5). © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 305–320; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900017