Elemental analysis of particulate matter in a metal workshop and of biological samples from exposed workers

During metal welding and cutting, large amounts of particulate matter (PM) are produced that might represent a significant health risk for the exposed workers. In the present pilot study, we performed an elemental analysis of fine PM collected in a metal workshop. Also, elemental analysis of the hair and nail samples collected from workers exposed to the workshop dust and control group was done. Concentrations of 15 elements in PM were measured with X‐Ray Fluorescence (XRF) and Particle Induced X‐ray Emission (PIXE), whereas inductively coupled plasma mass spectrometry (ICP‐MS) was used to determine 12 elements in hair and nail samples. Mean 8‐hr concentrations of PM_2.5, Fe, and Mn in the vicinity of welders were up to 1803, 860, and 30 μg/m³, respectively, whereas in the nearby city, daily PM_2.5 concentrations are on average 11 μg/m³. We found that several elements, especially Fe and Mn, had substantially higher concentrations in hair and nail samples of exposed workers than in the control group, which indicates the accumulation of metals in workers' tissues, although limit values were not exceeded.     

Development of an improved divergence‐free‐condition compensated coupled framework to solve flow problems with time‐varying geometries

In this article a coupled version of the improved divergence‐free‐condition compensated method will be proposed to simulate time‐varying geometries by direct forcing immersed boundary method. The proposed method can be seen as a quasi‐multi‐moment framework due to the fact that the momentum equations are discretized by both cell‐centered and cell‐face velocity. For simulating time‐varying geometries, a semi‐implicit iterative method is proposed for calculating the direct forcing terms. Treatments for suppressing spurious force oscillations, calculating drag/lift forces, and evaluating velocity and pressure for freshly cells will also be addressed. In order to show the applicability and accuracy, analytical as well as benchmark problems will be investigated by the present framework and compared with other numerical and experimental results.     

CCSD(T) study on the structures and chemical bonds of AnO molecules (An = Bk–Lr)

The molecular geometries and dissociation energies of AnO (An = Bk–Lr) molecules were first obtained at thecoupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] level of theory. Four hybrid functionals,B3LYP, M06-2X, TPSSh, and PBE0, were also employed in the calculations for the sake of comparison. In comparison ofthe CCSD(T) results, B3LYP, TPSSh, and PBE0 functionals can obtain more appropriate results than M06-2X and MP2.The analyses on molecular orbitals show that the 7s, 6d, and 5f atomic orbitals of actinide (An) atoms participate in thebonding of An–O bonds. The partial covalent nature between An and O atoms is revealed by QTAIM analyses.     

Boundedness of Singular Integral Operators on Local Hardy Spaces and Dual Spaces

Potential Analysis - The purpose of this paper is to provide necessary and sufficient conditions of the boundedness for singular integrals on the local Hardy space and its dual. Particularly the...     

Virtual Field Characterization for Ratcheting Effect Under Cyclic Loading

Experimental Mechanics - Ratcheting is an important mechanical behavior of metals and alloys, which is caused by the repeated accumulations of tensile and compressive strain in circle load....     

富晶格位错的多孔铋纳米花高效电还原二氧化碳制甲酸盐※

二氧化碳转化已成为现今世界研究的热点. 本工作采用原位电化学转化的策略, 将简单溶剂热法合成的层状甲酸氧铋纳米花(BiOCOOH NFs)还原为带有大量晶格位错的多孔铋纳米花(p-Bi NFs). 研究结果表明, p-Bi NFs电催化二氧化碳转化为甲酸盐具有较小的过电位(436 mV). 在–1.8 V(相对饱和甘汞电极, vs. SCE)时, 甲酸盐的分电流密度(j_formate)高达24.4 mA•cm^-2, 法拉第效率(FE_formate)为96.7%, 且在超过500 mV的宽电位窗口内FE_formate超过90%, 并具有很好的稳定性. 该催化剂的高催化性能可归因于前驱体晶格坍塌和重构而形成特殊的多孔粗糙的微纳多级结构, 其表面富含晶格位错和缺陷等高本征活性位, 且具有较强的电子传递能力. 本研究为设计合成高性能的电催化二氧化碳还原产甲酸催化剂提供了新的思路.     

The Synergistic Photocatalytic Effect of H3PW12O40 and Pt Nanoparticles Comodified UiO-66-NH2 on the Reduction of Aqueous Cr(VI) under Original pH

Kinetics and Catalysis - A ternary synergistic photocatalyst H3PW12O40/Pt/UiO-66-NH2 was successfully fabricated for the first time through a simple solvothermal synthetic strategy. We found that...     

Bromine doped g-C3N4 with enhanced photocatalytic reduction in U(VI)

Research on Chemical Intermediates - In the process of uranium mining and smelting, large quantities of low-concentration uranium-containing wastewater have been produced. It is an ideal solution...     

Biotemplated Fabrication of ZnO Microstructures with Enhanced Photocatalytic Properties from Rape Pollen

Crystallography Reports - Sodium dodecyl sulfonate and rape pollen were selected as soft and hard templates to induce ZnO formation under hydrothermal conditions, respectively. In the preparation...     

High-efficient surface tailoring via reverse atom transfer radical polymerization and reversible addition-fragmentation chain-transfer polymerization in an aqueous system initiated by a monocenter redox pair

The commonly used multi-center initiation methods always lead to the formation of quantities of homopolymer in the surface tailoring based on reverse atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. In this study, a monocenter redox pair constructed of silica bearing tert-butyl hydroperoxide groups and ascorbic acid (SiO₂-TBHP/AsAc) was applied to substitute the commonly used initiation method of R-supported RAFT grafting polymerization. All the propagating radicals were restricted on the surface of solid particles during the whole procedure theoretically, resulting in a higher grafting efficiency of 95.1% combined with the “controllable” feature at 10 h. This redox pair was also used to initiate the reverse ATRP in miniemulsion successfully with a grafting efficiency of 86.3% at 10 h. The grafting efficiency obtained under this monocenter initiation method was significantly higher than that of the frequently reported surface modification by reverse ATRP and RAFT polymerization. In addition, the high-efficient surface tailoring was traced and confirmed by nuclear magnetic resonance, Fourier transform infrared, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, and other analysis tests. The advantage of this monocenter redox pair will open a new avenue for the potential “high-efficient” surface tailoring of various materials.