水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

Biotemplated Fabrication of ZnO Microstructures with Enhanced Photocatalytic Properties from Rape Pollen

Crystallography Reports - Sodium dodecyl sulfonate and rape pollen were selected as soft and hard templates to induce ZnO formation under hydrothermal conditions, respectively. In the preparation...     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。     

Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.     

枝晶生长理论中的热-动力学协同

随加工工艺趋于复杂化和极端化,基于热力学驱动力和动力学能垒相对独立的枝晶生长理论已无法精确描述多种机制共同作用的非平衡凝固过程,大大限制了该理论与工业应用的结合。首先,本文综述基于热-动力学相对独立的枝晶生长理论的发展,分析其内涵的本征热-动力学相关性,并集成于以双辊薄带连铸技术为背景的基于热-动力学相关性的枝晶生长模型。其次,定量证明了热力学驱动力和动力学能垒的相关性,通过选择不同的驱动力-能垒组合,试图在双辊薄带连铸技术中实现合金设计和工艺优化。最后,通过分析现有模型的不足,对进一步枝晶生长模型的发展以及与工艺的结合进行展望。     

Polyethylene Terephthalate Deconstruction Catalyzed by a Carbon-Supported Single-Site Molybdenum-Dioxo Complex

Polyethylene terephthalate (PET) is selectively depolymerized by a carbon-supported single-site molybdenum-dioxo catalyst to terephthalic acid (PTA) and ethylene. The solventless reactions are most efficient under 1 atmosphere of H₂. The catalyst exhibits high stability and can be recycled multiple times without loss of activity. Waste beverage bottle PET or a PET + polypropylene (PP) mixture (simulating the bottle + cap) proceeds at 260 °C with complete PET deconstruction and quantitative PTA isolation. Mechanistic studies with a model diester, 1,2-ethanediol dibenzoate, suggest the reaction proceeds by initial retro-hydroalkoxylation/β-C−O scission and subsequent hydrogenolysis of the vinyl benzoate intermediate.     

光驱动C1转换到高附加值化学品的研究进展

阐述了光驱动C1化学的最新研究进展, 分别对光驱动费托合成、 水煤气变换、 二氧化碳加氢、 甲烷重整和甲醇重整制氢的研究进行了综述, 提出了当前研究存在的问题及发展方向.     

Multilayered 2D Cesium-Based Hybrid Perovskite with Strong Polarization Sensitivity: Dimensional Reduction of CsPbBr3

3D perovskite CsPbBr₃ has recently taken a blooming position for optoelectronic applications. However, due to the lack of natural anisotropy of optical attributes, it is a great challenge to fulfil polarization-sensitive photodetection. Here, for the first time, we exploited dimensionality reduction of CsPbBr₃ to tailor a 2D-multilayered hybrid perovskite, (TRA)₂CsPb₂Br₇ ( 1 , in which TRA is (carboxy)cyclohexylmethylammonium), serving as a potential polarized-light detecting candidate. Its unique quantum-confined 2D structure results in intrinsic anisotropy of electrical conductivity, optical absorbance, and polarization-dependent responses. Particularly, it exhibits remarkable dichroism with the photocurrent ratio (I_pc/I_pa) of ≈2.1, being much higher than that of the isotropic CsPbBr₃ crystal and reported CH₃NH₃PbI₃ nanowire (≈1.3), which reveals its great potentials for polarization-sensitive photodetection. Further, crystal-based detectors of 1 show fascinating responses to the polarized light, including high detectivity (>10¹⁰ Jones), fast responding time (≈300 μs), and sizeable on/off current ratios (>10⁴). To our best knowledge, this is the first study on 2D Cs-based hybrid perovskite exhibiting strong polarization-sensitivity. The work highlights an effective pathway to explore new polarization sensitive candidates for hybrid perovskites and promotes their future electronic applications.     

Development of a highly sensitive imaged cIEF immunoassay for studying AAV capsid protein charge heterogeneity

Post-translational modifications (PTMs) of adeno-associated virus (AAV) capsid proteins tune and regulate the AAV infective life cycle, which can impact the safety and efficacy of AAV gene therapy products. Many of these PTMs induce changes in protein charge heterogeneity, including deamidation, oxidation, glycation, and glycosylation. To characterize the charge heterogeneity of a protein, imaged capillary isoelectric focusing (icIEF) has become the gold standard method. We have previously reported an icIEF method with native fluorescence detection for denatured AAV capsid protein charge heterogeneity analysis. Although well suited for final products, the method does not have sufficient sensitivity for upstream, low-concentration AAV samples, and lacks the specificity for capsid protein detection in complex samples like cell culture supernatants and cell lysates. In contrast, the combination of icIEF, protein capture, and immunodetection affords significantly higher sensitivity and specificity, addressing the challenges of the icIEF method. By leveraging different primary antibodies, the icIEF immunoassay provides additional selectivity and affords a detailed characterization of individual AAV capsid proteins. In this study, we describe an icIEF immunoassay method for AAV analysis that is 90 times more sensitive than native fluorescence icIEF. This icIEF immunoassay provides AAV stability monitoring, where changes in individual capsid protein charge heterogeneity can be observed in response to heat stress. When applied to different AAV serotypes, this method also provides serotype identity with reproducible quantification of VP protein peak areas and apparent isoelectric point (pI). Overall, the described icIEF immunoassay is a sensitive, reproducible, quantitative, specific, and selective tool that can be used across the AAV biomanufacturing process, especially in upstream process development where complex sample types are often encountered.