排序方式: 共有8条查询结果,搜索用时 15 毫秒
1
1.
2.
膨胀聚合反应研究的进展 总被引:2,自引:0,他引:2
着重介绍膨胀聚合反应的类型和机理,讨论膨胀聚合反应研究中在的问题及今后的研究方向。 相似文献
3.
反应诱导相分离法制备双马来酰亚胺树脂微球 总被引:1,自引:0,他引:1
从聚醚酰亚胺(PEI)/[双马来酰亚胺(BMI)单体+烯丙基双酚A(DBA)]共混体系出发,通过反应诱导相分离,制备了约3μm尺寸的、单分散的BMI树脂微球.用扫描电镜(SEM)观察BMI树脂微球的形态,用激光粒度仪(LPS)表征BMI树脂微球的粒度及其分布,差示扫描量热法(DSC)测试BMI树脂微球的Tg.研究结果表明:PEI和聚酯酰亚胺(PEsI)的主链结构对BMI树脂微球形态有很大影响;PEI-A的用量增加,BMI树脂微球粒径减小,且粒度分布呈不均匀-均匀-不均匀变化;BMI树脂微球的Tg为215~218℃,略低于纯BMI树脂的Tg(225℃). 相似文献
4.
将四甲基氢氧化铵(TMAH)降解聚酯的方法移植用于降解苯酐(PA)固化双酚A型环氧树脂(DGEBA),降解生成的邻苯二甲酸二甲酯(DMP)可被气相色谱―质谱(GC-MS)快速检测到,同时通过内标法考察了TMAH用量对降解率的影响,结果表明TMAH降解苯酐固化环氧树脂效率较高,甲酯化率在95%以上。此项研究为剖析毫克级酸酐固化环氧树脂中的固化剂提供了一种快速且有效的方法。 相似文献
5.
Laser light scattering method introduced in this paper is a new method to study macromolecular gelation.The most prominent features of the methods are its high sensitivity and use of the scanning technique, whereupon the parameters describing the properties of reaction process at a macro level can be obtained. They are the speed and the point of gelation and the point of phase separation. The parameters describing the inhomogeneous changes in reaction systems at a sub-micro level can also be obtained. They include a (the correlation coefficient) and (the mean squared dilectric constant fluctuation). Thus, the tracks describing the inhomogeneous changes in reaction systems can be traced. The method presented here will provide a new approach to decpening understanding of the gelation process. 相似文献
6.
聚酯热熔胶增韧环氧树脂 总被引:2,自引:0,他引:2
利用扫描电子显微镜研究了聚酯热熔胶PE30增韧环氧树脂的微观相结构;利用DSC、DMA和TGA研究了聚酯热熔胶PE30对环氧树脂耐热性能的影响;测试了环氧树脂的冲击强度、弯曲强度和断裂韧性,考察了聚酯热熔胶PE30对环氧树脂力学性能的影响。结果表明,聚酯热熔胶PE30的最佳质量分数为15%,在固化过程中环氧体系发生诱导相分离,相结构由单相到连续相再到反转相;断裂韧性和冲击强度分别提高了127%和250%;弯曲强度和弯曲模量分别降低27%和44%;而体系玻璃化转变温度与起始热失重温度下降约1.5%,损耗峰温度下降约2.5%,说明聚酯热熔胶PE30可以在很大程度上提高环氧树脂的韧性,同时保持其耐热性能基本不变。 相似文献
7.
8.
1