Robust airfoil optimization based on improved particle swarm optimization method

A robust airfoil optimization platform is constructed based on the modified particle swarm optimization method (i.e., the second-order oscillating particle swarm method), which consists of an efficient optimization algorithm, a precise aerodynamic analysis program, a high accuracy surrogate model, and a classical airfoil parametric method. There are two improvements for the modified particle swarm method compared with the standard particle swarm method. First, the particle velocity is represented by the combination of the particle position and the variation of position, which makes the particle swarm algorithm a second-order precision method with respect to the particle position. Second, for the sake of adding diversity to the swarm and enlarging the parameter searching domain to improve the global convergence performance of the algorithm, an oscillating term is introduced to the update formula of the particle velocity. At last, taking two airfoils as examples, the aerodynamic shapes are optimized on this optimization platform. It is shown from the optimization results that the aerodynamic characteristic of the airfoils is greatly improved in a broad design range.     

翼型、机翼非定常运动模式下动态数值模拟

基于RANS方程,通过刚性动网格技术实现对翼型和机翼典型运动模式的描述,采用双时间推进方法和Roe空间离散格式对流场求解,构建了一个非定常气动计算平台;以NACA0012翼型为算倒进行了动态数值模拟可信度验证。数值模拟结果与试验数据吻合较好,升力和俯仰力矩的最大计算误差分别为3％和10％,表明了该平台的可靠性。另外,还数值模拟了M6机翼的动态非定常流场,并分析了两种湍流模型对非定常流场激波的捕捉能力。结果表明非定常流动中S-A湍流模型对激波的捕捉较B-L模型更敏感。文中开发的非定常计算平台对进一步解决三维复杂流场的流动问题有很高的工程应用价值。     

Influence of Monomer Types on the Designability of a Protein—Model Chain

In a three-dimensional off-lattice model,the method of Shakhnovich and Gutin for minimizing the Hamiltonian is applied to the design of a protein-model chain.The effect of the number of hydrophobic and hydrophilic monomer types on the designability of a protein-model chain is investigated.The simulation results reveal that the number of hydrophobic monomer types is a much more important factor than that of the polar monomer types in the design of a protein-model chain.     

小型无人机载大视场复眼相机光学系统设计

针对小型无人机载大视场光学成像观测需求,设计了一款仿生复眼大视场微小型相机.该相机光学系统总焦距为4mm,F数为4,视场角可达106°,在500m的飞行高度分辨率可达0.5m.所设计系统由曲面排布的微透镜阵列、光学像面变换子系统、图像接收和数据采集处理单元三部分组成.仿生复眼中的子透镜采用双胶合透镜组合以减小系统像差,相邻子透镜在满足视场一定重叠率的前提下,可允许相邻多达7个子透镜同时对地面目标进行成像,达到目标定位和测速的目的.仿真结果表明无人机载大视场复眼相机系统在给定的公差范围内像质满足要求,每个通道的光学畸变可控制在1.2%以下.     

L形覆盖问题

L 形覆盖问题是重要的组合数学问题.本文给出了3-L 形覆盖、4-L 形覆盖存在的充要条件,解决了这两种 L 形覆盖的问题.     

基于改进粒子群算法的翼型稳健型气动优化设计

基于标准粒子群算法,将位移变化作为影响微粒速度的变量,使得粒子群算法关于粒子位置为二阶精度函数,加快了收敛速度;进一步地在粒子速度更新公式中引入振荡环节,提高了群体多样性,改善了算法的全局收敛性．以改进粒子群算法为基础,结合气动分析程序、代理模型以及翼型参数化方法,构建了翼型稳健型气动优化设计系统．针对某型客机的基本翼型以及翼梢小翼翼型气动优化设计结果表明,优化后的翼型气动特性相对于初始翼型在较宽的设计范围内都有了大幅度提高．     

表面活性剂对树形银纳米结构影响的蒙特-卡洛模拟

采用偏压受限扩散聚集模型研究溶液中银树形纳米结构的生长。模拟中,在二维正方形格子中引入了等腰直角三角形粒子进行模拟,同时运用不同的粘贴概率来描述表面活性剂的效果。模拟结果表明树形纳米结构随着偏压的增大而变得更密。表面活性剂的加入使得树形纳米结构变得更加对称和规则。更进一步,当表面活性剂的效果足够强且外加偏压很小的时候,银纳米颗粒聚集成了银纳米片。模拟结果有利于定性解释相关的实验结果。     

Monte Carlo simulation of asymmetrical growth of cube-shaped nanoparticles

We simulated the asymmetrical growth of cube-shaped nanoparticles by applying the Monte Carlo method.The influence of the specific mechanisms on the crystal growth of nanoparticles has been phenomenologically described by efficient growth possibilities along different directions(or crystal faces).The roles of the thermodynamic and kinetic factors have been evaluated in three phenomenological models.The simulation results would benefit the understanding about the cause and manner of the asymmetrical growth of nanoparticles.     

考虑企业释放质量信号行为的产品推广策略

为吸引消费者, 一些企业尝试以释放质量信号为手段进行产品推广。本文考虑消费者购买时的参考效用, 通过构建模型, 探讨了短期经营下低质量企业不释放质量信号、短期经营下低质量企业释放质量信号、长期经营下低质量企业不释放质量信号和长期经营下低质量企业释放质量信号等四种情况下的产品定价策略, 并分析了释放质量信号对企业运营带来的利弊。研究发现:长期经营下低质量企业释放质量信号时, 产品质量差距的扩大将提高竞争企业的最优定价, 而释放质量信号程度的增加则将使最优定价降低。同时, 通过释放质量信号, 短期内低质量企业看似可以借此获得大量需求, 但现实中可行性不高。从长期经营来看, 以释放质量信号为手段的推广策略实际上会损害整个市场的利益。